Issue |
Section |
Title |
File |
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Statistical estimation of Resurs-DK1 SC image quality modified to acceptable survey conditions |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The results of determination angular rate and quasistatic microaccelerations the Foton S/C on the onboard measurements |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
High energy sypply spacebus with nuclear reactor power source for earth remote sensing purposes |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Tether parameters consideration during motion simulation of orbital tether system |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The rotation maneuvers and synthesis of gyromoment guidance laws for land-survey spacecraft |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Inkjet heat transfer working model phone (fuel transportation) refrigerator drip emitters prospective spacecraft |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Development of load – bearing frames of space telescopes with invariable dimensions adaptive to temperature gradients |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Methods of measurement and calculation of microaccelerations onboard of low orbit space microgravitational platform |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Status analysis and progress trends of high- and ultrahigh-resolution imaging systems |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Ways of the development of the radar space systems of the remote sensing of the Earth |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Analysis of possibility of residual propellant utilization in Soyuz orbital stage for controllable descent |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Experimental determination of acoustic loads daunches of Strela LV and calculation of test modes for a spacecraft to be delivered by it to space |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Methods of remote sensing data processing for the improvement of output images quality |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Experimental research and selection of design parameters of the onboard microaccelerations state and compensation monitoring equipment on the low-orbit space microgravitational platform |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Task-oriented systems in the problems of spacecrafts designing |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The design shape and basic performances of small satellite of SSAU and SRP SRC “TSSKB-Progress” |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Optimization methods of design-ballistic characteristics circumterraneous and interplanetary space vehicle with electrojet engines of low thrust |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Kick-stage control by navigational data of satellite navigation system |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Technical approach for estimation of engineering level of universal launch complexes for space launch vehicles witn use of overal parameter |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Influence of magnetic-impulse stamping processing steps on operational performances of inductor system |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Method of singular integral equations (SIE) in theory of dish antennas |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Signal detection via channels with low energy |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Simulation of thermal field of fluid flow in the presence of parametric disturbances |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Processing of experimental data by the method of the least squares |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Design of dynamic object finite positioning system digital controller |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Approach to the assessment and forecasting for onboard computer systems of monitoring space vechiles during its usage based on full-scale experiments |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Usage of the graphical languages in lifecycle of embedded software for spacecrafts |
(Rus)
|
Vol 9, No 2 (2010): Special Issue |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Creation of infotainment support of designing of control algorithms logic of spacecraft onboard control complexeses |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Analysis of plane motion relative to the centre of mass of a descent capsule with the three-harmonic moment characteristics during its reentry |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Analysis of buckling of supported aircraft module skin under compressive load |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Defining generalized reliability characteristics of complex technical systems including single-use subsystems |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Statistical analysis of a capsule’s motion during its reentry into the atmosphere with the aid of a space tether system |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Solving the problem of stabilizing program deployment of an orbital tether system taking into account limitations on the rotary motion of the tip body |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Development of information support for the spacecraft controlalgorithm design process |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Research of dynamics of initiation, propagation, growth and closure of bubble cavities and a supercavity in a pipe with decontaminated liquid under hydraulic impacts |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Control programs and motion trajectories of hypersonic first stage of an aerospace system |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
analysis of demands on the evolution and development of new domestic booster population |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Assessment of technicaland economical efficiency of developing carrier rockets with first-stage reusable units |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Complex approach to mechanical tests of executive automatic units of space vehicles |
(Rus)
|
Vol 9, No 1 (2010) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Choosing the structure of power-supply systems for low-orbit space vehicles |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
The influence of operational and technological factors on the dynamic parameters of elastic elements of elastic damping rotor supports |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Analysis of group properties of roller interaction in bearings using statistical |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Effect of thermal deformations on the quality of assembly in welding thread foints |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Tooling system of express assessment of explosive military equipment objects after hitling effects |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Compulsory ignition of fuel-air mixture in small-sized gas turbine engine combustion chambers |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Peculiarities of gas temperature field formation at the exit of small-sized gas turbine engine combustion chambers |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Defining the specific impulse of mixed solid propellants |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Determining the interrelation between detonation characteristics indicators and electrodynamic parameters of hydrocarbon fuels on the basis of statistical modelling of componental structure |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Obtaining the analytical solution of the heat boundary layer equation based on introducing additional boundary conditions |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Model of electromigration in thin metal films |
(Rus)
|
Vol 9, No 1 (2010) |
MECHANICAL ENGINEERING AND POWER ENGINEERING |
Optoelectronic device for the control of hydrocarbon fuel cavitation treatment |
(Rus)
|
Vol 9, No 1 (2010) |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Rail line models for adaptive receiver track circuits |
(Rus)
|
Vol 9, No 1 (2010) |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Measuring scatlering cross-section under poor anechoicy conditions |
(Rus)
|
Vol 9, No 1 (2010) |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Quality indices of an internal combustion engine controlled by the discharge current channel |
(Rus)
|
Vol 9, No 1 (2010) |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Two models of rail lines for adaptive receiver track circuits |
(Rus)
|
Vol 9, No 1 (2010) |
ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION |
Mathematical model of an eddy current converter for testing discontinuous structure samples |
(Rus)
|
Vol 9, No 1 (2010) |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Scalable distributed systems of competitive interacting processes and their optimality |
(Rus)
|
Vol 9, No 1 (2010) |
CONTROL, COMPUTER SCIENCE AND INFORMATION SCIENCE |
Through optimization of branching trajectories in view of random disturbances |
(Rus)
|
Vol 9, No 1 (2010) |
HUMANITIES |
System for assessing the consistency of radioelectronic device design and the manufacturer’s technology at the stage of mastering |
(Rus)
|
Vol 9, No 1 (2010) |
HUMANITIES |
The concept of technology: objective and subjective foundations of its terminological status |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Cycle air heating system of gas pumping unit NEVA-25NK |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The laser priming of high energy materials ignition |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Manufacture and technology of production of alloyed steel with microcrystal structure |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The simplification of heat engines thermodynamics calculation with using of idaeal gas’ model |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
About the centre of science-educational of laser systems and technologies at faculty DLA SSAU |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Dynamic tests of probes for measurement of pulsations pressure at the raised average pressure |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Laser vibrating method of gluing shells defects detecting |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Oxyhydrogen propulsion device base on water electrolysis and lrest on component H2 + O2 for control system SS |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Hydrodynamic rinsing of hydrofuel system’ unflowing units |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The determination of various factors influencing on change of the mounting fit and calculation procedure of the load distribution in the cylindrical roller bearings operated in tightness |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Theoretical calculation approach of gas turbine engines compressor characteristic line |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Manipulate pulsed detonation engine |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Development of advanced low thrust rocket engines with ecologically friendly propellants |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Structure and mehanpichesky properties of the shovel 1 steps of the rotor of turbine GTE-45-3 after the long operating time and regeneration |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Designing and experimental research of hybrid gas bearings for heavy multibasic rotor of gas turbine |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Influence of earthquake parameters on tribological properties of friction pendulum bearings (seismo insulators) |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Special methodic of economics indexes determination of turbocompressor stations for central air supply of industrial factories |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
A separator skidding in the cylindrical roller bearing between shafts of the gas turbine engine |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Noise reduction of snow-plough |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Experimental acknowledgement of adequacy of the developed mathematical model of instant giving of the liquid by the gear pump |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The development of mathematical model of hydrodynamics of "tpapped" volume in the gear pump |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Calculation of durability of working section of progressive divider valve by a method of final elements |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Development and investigation of electropump of increased service life with ball bearings |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Force interaction between cage and elements of high speed ball bearing and bearing assembly |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Research and rationing admissible nick on working blades of the compressor for engine NK-12 example |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Investigation of processing performance on finish turning of high strength steel 30HGSN2A |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Features of application of “aluminum- boron nitride” composite material in aviation engines |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Designing GTE on the basis of versatile gas generator small dimension |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Selection of new heat-resistant nickel alloys for advanced aviation engines |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Conception of the student work place arrengement for the computer aided design base teaching |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Methodology of the adaptive graphic and geometric training for the computer aided design teaching |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Motion trajectories of the vehicle with mass injection pre-compressor cooling turbojet engines as the first stage of aircraft-space systems |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Features of adaptation of first-year students of SSAU in the application of computer technologies of training |
(Rus)
|
Vol 8, No 3-3 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
1 |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Electronic model of turbine drive flow for its direct optimization |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Design improvement of multi-film rotor journal bearings of diesel engine turbochargers |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The optimization of the turbine blade-disk interlock of the type “fir tree” |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Operate reliability enhancement of thermogenerator modules for heat engine with acoustic emission method |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Increasing efficiency of pressurization of the rocket tanks in the flight |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
the research of the influence of the maximal stress duration in the cycle of loading upon the low-cycle fatigue and the long-term strength of the turbine shaft made of the material ЭИ 961-Ш |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The determination of the efficient parameters of surface strenghtening the thin-walled and the small-hard parts of gas turbine engines based on deformation tolerance |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Methods calculation of fatigue crack growth period and her it’s graphic generalization |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Research of methods for protection the surface of cryogenic tanks from ice formation |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Алгоритм вибрационной диагностики кинематического узла механизма |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Probabilistic estimate of compressor blades durability to foreign object damage |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Way of increase in efficiency of cycle gas turbine units |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Features of designing gas turbine of complex cycle GT24 |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Realization of the multichannel cnc machining methods |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Influence of impulse generation mode on electro-erosion treatment |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Inkjet heat transfer working model phone (fuel transportation) refrigerator drip emitters prospective spacecraft |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The comparative analysis of ways for manufacturing of forging pipes made from C17200 alloy for friction bearings for hard loaded parts |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Decrease in toxicity of transport diesel engines by neutralisation nitrogen oxide of the fulfilled gases |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Obliteration’s problems in capillary-porous structures of aerospace hydro systems’ parts |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Optimization characteristics of rotor-support system from NK-14ST free power turbine with consider statics and dynamics propertys |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Effect of coagulation of drops on fuel spray characteristics behind atomizers |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The mixing efficiency of liquid droplet fuel and air flow in the frontal swirl devices |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Mixing parameters investigations and methods of approach to calculations and development of the thrusters with a spray-centrifugal scheme of NT and NDMH mixing on the confusion chamber wall in considered |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Forecasting of the properties of structural materials and the choice of optimal technologies of their production |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Method of calculating of the load characteristics of cylindrical support with a discrete location of elastic damping elements of the MR material |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Particularity of thermal condition computation oF LRE with cooling by liquid oxygen |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
About elaboration diagnostic methods of elements the pneumohydrosystem productions |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Consideration of active forces at internal-combustion engine analysis in MSC.ADAMS environment |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The interconnection between the benzo(a)pyrene and the soot emissions heat-engine using hydrocarbons fuels |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The detecting improvement by laser surface sounding |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Current preventive control of a technical process on a basis of exponential smoothening |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Dependence between microscopic characteristics of the material MR and parameters of press forming |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Feature of optimization of parameters of working process GTE with the free turbine at initial designing in the conditions of uncertainty |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Features of calculation of hydraulic characteristics of capillary spray jets of is liquid-stnyh rocket engines of small pull-rod |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Мethod of design calculation of centrifugal emulsive duplex fuel nozzle |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Mathematical model of small-thrust rocket engine with gaseous oxygen and hydrogen in pulse operation |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Calculation of the first resonant frequency and the first resonant factor of a sound absorption of material МR |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Influence of the frequency and load on wave deformation processes under high cycle fatigue |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Modeling of structure of the porous MR material in process of heat conduction |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Modeling of heat conduction process in porous MR material |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Productivity enhancement by modelling based ONMRPII/ERP systems |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Properties and structure of "trivalent" chromium coatings, deposited with nanoparticles of metal oxides |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
PDM implementation efficiency in mechanical industry |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The flowing reactor as the tool of an experimental research of processes of transformation self-igniting liquid rocket fuel |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Research of laws of interaction of components in a liquid phase self-igniting liquid rocket fuel |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Researching error of blade locating in mechanism the POMKL–BLIK fixture by the system of approximate analysis of double-dimensional densities of probability |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The analyze of work of throttle cooling system’s microheat exchanger, wich uses nitrogen with nearly critical parameters |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Pulsing chambers of combustion and their application in aerospace engineering |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Application’s ways of gas–turbine power plants of NK-family for upgrading of heat electric generation plant |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Research of the wet condition in fuel tanks of high weight booster rockets during storage and aviation transportation periods |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The calculated study of fluid structure in a hub an axial aviation turbine |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The story of invention and development of supercharge units of internal combustion engines |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Mathematical modelling and parametric research of flow of the twisted turbulent single-component stream of the propulsive mass in the trance- and supersonic areas of Laval nozzles |
(Rus)
|
Vol 8, No 3-2 (2009): Special Issue |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Methodology complex of hardware-in-the-loop functional modelling of gas turbines and its systems |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Temperature’s fields and hydraulic losses in combustion chambers of small gas turbine engines |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Multistage combine swirl cooling system for aircraft’s board equipment |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Numerical modeling of physical processes in fuel tank refueled by cryogen conventional gas with undrainaged storage |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Numerical simulation of working process in afterburner chamber of vapour gas machine with NK-37 engine |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Vertex thermoelectric supplier for gas provided stations |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Diagnostics of quality mixing in spray of the fuel nozzles by optical methods |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Comparisons of performances of various injector types used air flow |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Cars diagnostic of gas flow, electrical charge and burning processes |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Simulation of lean blow out process inside gas turbine combustor |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Computational method of the gas flow turbulence intensity at the gas turbine engine combustion chamber outlet |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Effect of the inlet flow gas temperature field and turbulence on heat transfer in the turbine nozzle cascade and combustion chamber optimization |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Numerical modeling of physical processes in fuel tank refueled by cryogen conventional gas with undrainaged storage |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Combustion characteristics management of air-aluminum flame in co-current air flow |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Mix forming and burning in heat engines with twisting of air punch |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Mathematical model of combined combustion in internal combustion engines |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Thermodynamic effect of gas stream division and its using in different fields of human activity |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Visualization of gas flows structures by mean of schlieren and interferometry methods |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Different factors influence upon filling ratio of piston engine |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Developing of low emission fuel burning system in gas turbine engines |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Lean fuel-air mixture burning in the cases of inward and outward ignition by combustion products |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
The influence of fuel chemical speciation on car exhaust of benz(a)pyrene |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Automated accurate finishing of gas turbine engine’s combustion chamber |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Fault crossing safety estimation for the underground pipeline |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Infrared gas burning device developing based on twisting ejector |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Detonation burning concepcia application in aviation power-plants |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Features of the cost-function analysis in the process of gas-turbine engines competitive strength heightening |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Boundary layer separation investigation in diffusion channels with swirling cells |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Fuel distribution comparison analysis in three-stage swirling sprayer modules |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
Computational processes simulation inside of micro scale burner |
(Rus)
|
Vol 6, No 2 (2007): Special Issue |
TECHNICAL SCIENCES |
The influence of swirl burners on characteristics of gas turbine engines’ combustion chambers |
(Rus)
|
Vol 5, No 3 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Method of presenting compressor characteristics in mathematical models of gas turbine enginer |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Generator transducer of enhanced sensitivity phase deviation |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Residual stresses and limiting amplitude of strengthened parts with concentrators in case of asymmetric cycle |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Simulation of a two-dimensional laminar boundary layer using the method «whirl in a cell» |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
The influence of the concentrator type on the dependence of endurance limit of strengthened parts on residual stresses |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Analysis of servicing passengers in the international Airport Kurumotch |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Analysis of microparticle flows in case of electrostatic fluid dispersion |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Improving industrial organization at amachinery construction plant on the basis of reengineering |
(Rus)
|
Vol 5, No 3 (2006) |
TECHNICAL SCIENCES |
Reducing logistic expenditures on the basis of modelling materials movement processes at industrial enterprises |
(Rus)
|
Vol 5, No 3 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Metacomputing tool platform in the context of GraphPlus project |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Establishing and develompent of research and design organizations in Kuibyshev Region (late 1950s – early 1960s) |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Combined stimulation system in a single-lever multielement game |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Complex optimization of business economic activity indicators |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Forming value orientations of students of general education boarding schools with elementary grounding in flying as a factor of developing military professional trend |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Methoprinciples as the basis of professionally vital competences formation of specialists in the area of engineering during the period of teaching a foreign language |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Methods of managingan nprofitable business on the basis of «Six Sigmas» system |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Discrete models of dynamic system stimulation |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Speech euphimisation in a sociocultural aspect |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Setting up industrial clusters and increasing the competitive abibity of Samara region |
(Rus)
|
Vol 5, No 3 (2006) |
HUMANITIES |
Personal activity approach to forming professionally significant characteristics of humanitarian specialists |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Perfection of kinetic model of fatigue wearing of surfaces on friction |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Method of regressive analysis of experimental and calculation characteristics of centripetal microturbines nozzle apparatus |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Determination of the gas flow and pressure pulsations on the input of orifice plate flowmeter's measuring gas circuit |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Assessment criteria of objects technical status in view of reconstruction of gas-transport system of limited company "Samaratransgas" |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
On selection of equivalent loading of standard smooth specimens for determining low-cycle durability of gas-turbine engine major components |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
About the mechanics of the contact in a cylindrical roller bearing |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Perfection of operational characteristics calculation techniques for the decision of task of gas turbine engine control program optimization |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Research of influence of azimuthal orientation of monocrystal on frequency characteristics and forms of oscillations |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Properties of the low-carbon steel 08AL welds |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Calculation method of limiting plastic strains in the angular concentrator zone |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Realization of structural and object-orintes ways of designing of GTE |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Designing of aircraft GTE in PDM environment |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Russian aviation engines' manufacturing organizations cooperation model |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
The capillary head in porous products from material MR |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
The model of structurally-parametrical optimization of the technological process of mechanical treatment during the stage of designing |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
The cooling meanings for "gasodynamic" bending shroud of working blade for a HP turbine from turbofan engine with high gas temperature |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Impulse & energetic characteristics of insufficiently expanded two-phase combustion-gas stream |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Calculated study of influence of squinted form pressure side of outlet trailing edge of axial turbine vane upon projection losses in non-cooled vane row |
(Rus)
|
Vol 5, No 2-2 (2006): Special Issue |
TECHNICAL SCIENCES |
Energetic power as a criterion of optimization |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Environmental safety problem realization of carrier rocket launching with enterprise engineering paying load |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Examination of energy and power parameters of high-speed tups of modifications VSM-2 and VSM-4 |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The application loop labyrinth seals (LLS) for increasing effect of automatic unload bearings system (AUBS) turbopumps |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Results of the development testing of demonstration pulsed engines and rational areas of their implementation |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Jet noise generation near a locally reacting surface |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Development of up-to-date means of automation using 3D-simulation to develop control programmes of turbine blade plasma spraying abstract |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The features of gas flow streamline in turbine blades |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Some features of seals with spring preloaded semi-movable rings calculation |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The mechanism of formation of antifrictional coverings at strengthening processing |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The method of calculation of optimum thickness of antifrictional coverings |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Analysis of vibrational state of rolling contact bearings during their runout |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Investigation of vibrational state of rolling contact bearings during their runout. Experimential data analysis based upon the spectrum of peaks |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Model operation of permanent deformation on the surface of the gas-turbine engine blades and determination of blade deformation after removal the surface with tempers |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Technological heredity end constructional durability |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Fretting-corrosion and fretting-fatique in low-moving joinst |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Increase of efficiency of systems of cooling of power installations with coil heat exchanger from gilled tube pipes |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Dynamic micro alloing strengthening of high-speed steel tool cutting part for machining of aircraft engine ccomponents |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Possibility of the rise exploitation resistence details aircraft engines of the creation ordered dislocation structures |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Analytical estimation of postoperational condition of high pressure turbine blades of ДЦ 59Л and ДЖ59 engines and their damage control features |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Evaluation of influence moisture content in an air on gte parameters |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The information chanales of aviation GTE in board conditions control task |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Prediction of creep and long-term strength of heat-resistant steels and alloys |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
On the interrelation of the regularities of long-term fracture established in testing of smooth and notched specimens |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
On the use of the method of base diagrams for specifying the prediction of the long-term strength of heat-resistant nickel-base alloys |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Method multifactorial planning of experiments at research characteristics and processes of air turbine engines |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Imitating modelling operation of aircraft gas-turbine engines |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Increase of efficiency of accelerated corrosion tests of nozzle vanes of a turbine engine |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Multidisciplinary system for process analyzing in air-breathing engine afterburner |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Modernisation of method of definition of rational conditions of processing at finish operations of processing workpieces |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
About visualizations pulsing currents of the liquids through concentrated resistance |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
About measurement of pulsations of pressure in flowing part GTE |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Calculation and optimization power characteristics pump units of rocket engines |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Analysis of methods of evaluation of energy dispersion in constructive damping devices |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Elastic deformation of fan blades as a factor, influencing the gas-dynamic unbalance |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Matching of free-turbine and gas-centrifugal-compressor rotational speeds in the gas-pumping unit |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The using of powder compositions in melting of aluminium cast alloys |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Gap calculation in rocket engine turbopumps non contact seals |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
On lubrication of power turbine bearings in NK-37 gas turbine |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Theoretical substantiation of gasodynamic parameters of internal chamber processes in detonation engines |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Research of vibration intensity of elastic metal-plastic sliding bearings with water lubrication on turbo-generator K100-90 of the "Slavic" state district power station and feed-pump PEN-11 of the "Bezimyanskaya" thermal power station |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Relaxation non-linear damping as the basis of engine elements and units operational analysis |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Definition of parameters of strength reliability of details of aircraft engines at a design stage |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Results of experimental tests of «dry» seals for NK-37 gas turвine separate compressor with the use of air as working body |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Use of model of a high level for perfection of technology of electrochemical processing in view of secondary distribution of potentials in an interelectrode backlash |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Modeling of electric fields in an electrochemical cell in conditions of electrochemical processing by means of program ANSYS |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Methods of modeling in problems of rotordynamics and vibration diagnostics of rotor systems with fluid-film bearings |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
A method of calculation of 3D motion of a rigid rotor with fluid-film bearings |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Improvement of turbocompressor rotor supports of engines with chemical fuel elements by means of combination ball bearing and fluid-film bearings according to a successive scheme |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Interaction between a piston ring and a deformed cylinder liner of the internal combustion engine |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Estimation of aviation engines D-30KP/KU/KU-154 technical condition by scintillation measuring |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Technical ceramics wearing calculation based on invariant-theoretic method |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Experimental investigations on revealing effective means for suppressing cavitation self-exciting oscillations in a propellants supply system of LRE |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Tests of experimental lre chambers with nozzle’s extensions from CCCM material |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Experimental investigations of radial slot seal with floating rings in pump for LRE TPU, at misalignment of axes |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Estimation of influence of elastic bending deformations of a rotor on static and dynamic characteristics of fluid-film bearings and contactless seals |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Burning process in combustion chambers of new generation powerplants |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
The research of discharge processes, resulting at the ignition high-voltage system engine in secondary spark formation time |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Development of vibration isolator mathematical model with the spherical elastic-damping element from the МR матerial |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Research of the quantitative characteristics technologies of manufacturing of products from a material МR |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
New approach to the GTE theory expounding |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Procedure of evaluating the dynamic component of gravity force for aerospace centrifuges |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Simulating thermal fields of complex closed structure aboard research space laboratory |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Joint operation ofaircraft gas turbine engines and fuel automated equipment in acceleration and braking modes |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Problems of relational navigation in load transporation on helicopter external hanger |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Optimization of a thin-walled wireframe structure with strength and stiffness limitations |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Analysis of temperature field at the combustion chamber outletwith the flowturning in the gas collector |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Estimation of technogenetic substance flow density distribution in time and spacewith regard to local breakages of space vehicle compartments |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Method of choosing parameters of space observation system orbital structure |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Experimental analysis of pulsation and vibration processes in flow – construction interaction |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Control over orbital tether system unfolding |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Optimal positioning of supports for statically definable beams |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Acoustic whirling resonance of an aircraft fuel pump screw |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Application of gas dynamics numerical methods for the analysis of nitrogen oxide formation process and choosing low emission combustor design |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Calculation of fuel distribution in combustion chamber nozzle module |
(Rus)
|
Vol 5, No 1 (2006) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Parametric CFD designing of combustion chamber elements |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Peculiarities of setting up a problem of calculating processes fora general-purpose gas cylinder as anon-classical two-phase system and estimation of its temperature condition |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Investigating the process of shaping solid moulded parts according to the outward happing-moulding pattern |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Mathematical modelling of pressure pulsations and noise of a manual mechanized pneumatic tool |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Computational and experimental research of the thermal state of a perforated wall of a liner with inclined slots |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Sequential perforation of tubular articles by elastic tools |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Physical foundations of gas dynamic method of controlling subsonic gas fetes |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Investigating the mechanism of human eye accommodation on the basis of finite-element modelling |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Solving the problem of statistical dynamics for the oil main |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Mixinga carbonie acid fet with air flow |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Dielectric liquid meniscus charge on a high-voltage needle electrode |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Mathematical modeling of hydrodynamic processes in a pipeline partially filled with air |
(Rus)
|
Vol 5, No 1 (2006) |
TECHNICAL SCIENCES |
Algorithm of calculating hydrodynamic parameters of a pipeline partially filled with air |
(Rus)
|
Vol 5, No 1 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Assessing the speed of data transmission of a company’s external internet channel for providing the required quality of connection |
(Rus)
|
Vol 5, No 1 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Formalizashion of interpretations and activities of crew and expert |
(Rus)
|
Vol 5, No 1 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Computer – aided control of instant date |
(Rus)
|
Vol 5, No 1 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Phenomenological model of mastering educational material with regard to the factor of motivation |
(Rus)
|
Vol 5, No 1 (2006) |
CYBERNETICS AND INFORMATION SCIENCE |
Statistical analysis of telecommunication system on the basis of studying information flows presented as time series |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Linguocultural peculiarities of English language standard letters |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Cluster organization of economy and efficient region management |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Regional strategy and clusters |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Potential of future engineer’s self – realization as a pedagogical problem |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Competence model of a professionally mobile specialist in the area of engineering |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Complex analysis of the efficiency of a higher school teacher’s pedagogical activity |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Model of asystem of upgrading civil employees’skills |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Innovative methods of analyzing material and information flows of production |
(Rus)
|
Vol 5, No 1 (2006) |
HUMANITIES |
Psychological and pedagogical factors and the efficiency of a higher school teacher’s pedagogical activity |
(Rus)
|
Vol 4, No 2 (2005) |
HUMANITIES |
Nonmaterial factory of network economy development in macroeconomic systems |
(Rus)
|
Vol 4, No 2 (2005) |
HUMANITIES |
Social investments as a form of manifestation of corporate business responsibility |
(Rus)
|
Vol 4, No 2 (2005) |
HUMANITIES |
To the question on ergonomic educational process construction at higher school |
(Rus)
|
Vol 4, No 2 (2005) |
HUMANITIES |
Prospects of network economy development in today’s macroeconomic systems |
(Rus)
|
Vol 3, No 2 (2004) |
INFORMATION AND ECONOMICAL SECURITY |
Some issues of technological information protection and information stability of complex systems |
(Rus)
|
Vol 3, No 2 (2004) |
INFORMATION AND ECONOMICAL SECURITY |
Electoral campaign security concept |
(Rus)
|
Vol 3, No 2 (2004) |
INFORMATION AND ECONOMICAL SECURITY |
Economic security in the system of russia’s national security |
(Rus)
|
Vol 3, No 2 (2004) |
INFORMATION AND ECONOMICAL SECURITY |
Mathematical and instrumental provision of economic security of business and industries |
(Rus)
|
Vol 3, No 2 (2004) |
INFORMATION AND ECONOMICAL SECURITY |
Systemology of national security at the borderline of the centuries: state and prospects of development |
(Rus)
|
Vol 3, No 2 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The history of creating space facilities of Earth distant probing at the state research and production space-rocket centre “TSSKB-Progress” |
(Rus)
|
Vol 3, No 2 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Determing thermal physics characteristic of cold accumulator nozzles of spacecraft airborne cryogenic cooling systems |
(Rus)
|
Vol 3, No 2 (2004) |
TECHNICAL SCIENCES |
Evaluation of changes of gas parameters in a vessel when its wall is broken through by high-velocity mechanicak particles |
(Rus)
|
Vol 3, No 2 (2004) |
TECHNICAL SCIENCES |
Mathematical model of system heating by a moving slayer in case of plazma slaying |
(Rus)
|
Vol 3, No 2 (2004) |
TECHNICAL SCIENCES |
Reduction of internal aeroacoustic noise in a VAZ-1118 automobile salon |
(Rus)
|
Vol 3, No 2 (2004) |
CYBERNETICS AND INFORMATION SCIENCE |
Road traffic simulation in the intellectual transport system |
(Rus)
|
Vol 3, No 2 (2004) |
CYBERNETICS AND INFORMATION SCIENCE |
Theoretical issues of detecting defects in a parallel how of thecnological operations |
(Rus)
|
Vol 3, No 2 (2004) |
HUMANITIES |
Formation of factor – coordinated complete supply mechanism of interaction in the «customer-supplier» system |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Some peculiarities of building up military industrial complex in the USSR in the 30s |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Interaction mechanism in a single-level system with transferable utility |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Model of creditor’s target function and acceptable values of mortgage credit parameters with regard to borrower’s solvency |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Teacher’s status in kuibyshev oblast (region) in the post war (1945 – 1965) |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Presenting a system of organization management on the basis of functional approach |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Corporate amortization strategy alternative |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Constraction of a taxation model and solving optimization task |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
A regressional method of currency exchange rate prediction |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Structural objectivs’ establishing of the activity of medical institutions |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Model of intercorporate regional economic indicators matching in interregional relationships |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Theory – and – play model of stock market |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Optimality of decentralized hierarchy controlling non-connected technological network |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Numerical method of solving incentive problems |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Developing a programme of professional training of managers and executives for enterprises of russia’s national economy in the sphere of finance and credit |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Analysis of the main priorities of the world innovation market |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Priorities of Russia’s innovation strategy in conditions of economic growth |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Instrumental methods in marketing communications managing of non-profit organisation c(on the sample of higher school) |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Simulation of logistic dinamics in conditions of real economy |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Humanitarian component of science and education: problems of development and interaction |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Agrarian sector of Volga-Vyatsky region republics in the years of the Great Patriotic war |
(Rus)
|
Vol 4, No 1 (2005) |
HUMANITIES |
Russian old believer diaspora in Australia |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
The programme of three-channel control of suborbital motion trajectory of orbit plane |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Estimation of efficiency of controlling scientific experiments at autonomous microgravitational space platforms |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Transformer reformer of micrometeoroids and technical debris based on film mdm structures |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Simulation of spacecraft functioning processes with regard to accumulated failures of opboard system elements |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Optimum distribution of navigational position and velocity sessions for a spacecraft with remote sounding of the earth using data from integrated navigation complexes |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Proving theorems of changing structure rigidity |
(Rus)
|
Vol 3, No 1 (2004) |
AIRCRAFT AND SPACE ROCKET ENGINEERING |
Numerically - analytical method of solving of problems of potential flow about group of two-dimensional |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Gravitational therapy: four aspects of simulating limb hemodynamics |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Metodical error of the optical-electronic discrete-phase method of turbomachine blades deformation measurement |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Influence of ingot bar chemical composition on the structure and quality of gas turbine engine blades cast by directed crystallyzation |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Calculation of twist drawing parameters for square and restangular pipes |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Magnetic – impulse working of rapid cutting steels |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Possibility of pipe bending by elastic instruments |
(Rus)
|
Vol 3, No 1 (2004) |
TECHNICAL SCIENCES |
Influence of dynamic characteristics of joined hydraulic chains on vibrational characteristics of pipelines |
(Rus)
|
Vol 3, No 1 (2004) |
CYBERNETICS AND INFORMATION SCIENCE |
Consolidate functioning of competing purchases electronic system |
(Rus)
|
Vol 3, No 1 (2004) |
CYBERNETICS AND INFORMATION SCIENCE |
Computer-aided system for approximation correlation-spectral analysis |
(Rus)
|
Vol 3, No 1 (2004) |
CYBERNETICS AND INFORMATION SCIENCE |
Method of designing reliable real-time control algorithms for spacecraft |
(Rus)
|
Vol 3, No 1 (2004) |
HUMANITIES |
Problems of synthesis of factor-coordinated interaction mechanism in a multicomponent production economic system |
(Rus)
|
Vol 3, No 1 (2004) |
HUMANITIES |
Optimal strategies of attracting financial resourse for long-term company development |
(Rus)
|
Vol 3, No 1 (2004) |
HUMANITIES |
Creation of an education process matrix of cognition and activity |
(Rus)
|
Vol 3, No 1 (2004) |
HUMANITIES |
General approach to the economic dynamics identification on the basisof autoregression models |
(Rus)
|
Vol 3, No 1 (2004) |
HUMANITIES |
Cost of work on preservation of biosphere consumer properties |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Modeling the problem of parametric coordination in the industrial complex system «supplier-customer» |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
To the questions about science and technology state policy in USSR in 50′s - 80′s |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Evaluation of sensitivity of outcomes of the decisions taken to a modification of market parameters |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Multipurpose model of organizational reengineering |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Coordinated management of a technological complex with sequentially connected units |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Modeling the mechanism of managing the quality of services offered by service sphere enterprises |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Conception of creating staff educational potential as element of innovation business strategy |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Efficiency of the sуstem of preparing university students for communication |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Some methodological issues of managing processes of making and improving car models |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Econometric simulation of expanded reproduction on the basis of autoregression |
(Rus)
|
Vol 2, No 2 (2003) |
ISSUE WITHOUT SECTION |
Problem-situational games in innovative activity of a firm |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Investigation of fuel spraying and mixing in the head of nk-type engine combustor |
pdf (Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Experimental determination of characteristics of pneumatic atomizers and their correlation with calculation results |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Peculiarities of converting speed-boosted combustion chamber operating on natural gas |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Influence of initial turbulence of aluminum-air mixture flow on ignition and flame stabilization processes |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Method of controlling burning processes in a pseudo-liquid fuel flow |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
“Rich burn - quick quench - lean burn” technology (RQQL) for aviation gas turbine engine working on liquid natural gas |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
RQQL low emission combustion process as a way of achieving high reliability of stationary gas turbine engine |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Developing a dynamic model of premixed fuel combustor |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Using computational gas dynamics methods for the simulation of multicomponent gas flow, combustion and heat exchange in a gas turbine combustion chamber |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Experience of design and lines of further improvement of gas turbine engine low-emission combustion chambers |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Influence of interphase exchange on fuel-air mixing in a module combustor |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Experimental and computational research of thermal and stressed state on a liner perforated wall with various injection angle and hole spacing |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Afterburning of toxic components of eic burnt gases |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Defining combustor gas flow turbulence parameters on the basis of integration and transformations of Reynolds AND Navier-Stokes equations |
(Rus)
|
Vol 1, No 2 (2002): Special Issue |
ISSUE WITHOUT SECTION |
Summarizing the experience of turbulent combustion in aircraft engine and industrial gas turbine combustion chambers |
(Rus)
|
Vol 5, No 2-1 (2006): Special Issue |
TECHNICAL SCIENCES |
Model operation of thermo elastic deformation at the electrochemical working compressor blades with using method of final elements in the software environment “ANSYS” |
(Rus)
|