Email this article 
The comparative analysis of ways for manufacturing of forging pipes made from C17200 alloy for friction bearings for hard loaded parts
- Authors: 1 11, 1 12
-
Affiliations:
- Samara State Aerospace University
- Open Company "BerilliUM", Moscow
- Issue: Vol 8, No 3-2 (2009): Special Issue
- Pages: 132-137
- Section: AIRCRAFT AND SPACE ROCKET ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/747
- DOI: https://doi.org/10.18287/2541-7533-2009-0-3-2(19)-132-137
- ID: 747
Cite item
Full Text
Abstract
The question of influence of forging technology on alloy C17200 microstructure and operational properties of pipe products in this article is considered. On the basis of the analysis of a microstructure the conclusions are drawn about primary mechanisms of plastic deformation in such processes as direct hot pressing and isothermal punching.
About the authors
1 1
Samara State Aerospace University
Author for correspondence.
Email: sadohina@ssau.ru
Russian Federation
1 1
Open Company "BerilliUM", Moscow
Email: sadohina@ssau.ru
Russian Federation
References
- Al Hartline. Galling Resistance of Alloy 25. Brush Wellman, GR1/0495.
- Металлы и сплавы. Справочник.- СПб.: АНО НПО «Профессионал», 2003. -1066с.
- Ван Флек, Л. Теоретическое и прикладное материаловедение / Л. Ван Флек.- М.: Атомиздат, 1975. – 472с.
Supplementary files
