| Issue |
Title |
File |
| Vol 11, No 5-1 (2012): Special Issue |
Reduction of circumferential variation in the final stage of IPC |
(Rus)
|
|
Baturin O.V., Krivcov A.V., Matveev V.N., Popov G.M.
|
| Vol 11, No 3-1 (2012): Special Issue |
Reduction of circumferential variation in the final stage of IPC |
(Rus)
|
|
Popov G.M., Mamedov A.C., Smirnova Y.D.
|
| Vol 11, No 5-2 (2012): Special Issue |
Reduction of friction on a flat plate in the presence of a fluid film on its surface |
(Rus)
|
|
Klyuev N.I., Frolov V.A., Kryukov Y.A.
|
| Vol 3, No 2 (2004) |
Reduction of internal aeroacoustic noise in a VAZ-1118 automobile salon |
(Rus)
|
|
1 1., 1 1.
|
| Vol 9, No 4 (2010) |
Reduction of the focal spot size in high-aperture focusing systems at inserting of aberrations |
(Rus)
|
|
Pelevina E.A., Khonina S.N.
|
| Vol 2, No 1 (2003) |
REDUCTION OF TURBO-PUMP UNIT VIBRATION BY REGULATING BEARING RIGIDITY |
(Rus)
|
|
Beloussov A.I., Balyakin V.B., Lulev A.I.
|
| Vol 11, No 3-3 (2012): Special Issue |
Reduction of variable resonance stresses in the last stage of medium pressure compressor |
(Rus)
|
|
Shklovets A.O., Sen'chev M.N., Dzhibilov P.T.
|
| Vol 11, No 5-2 (2012): Special Issue |
Reduction the influence of geometric axes of the skew elements of a pair of valve-saddle on the sealing ability and resource of the valveseal |
(Rus)
|
|
Mulyukin O.P., Samsonov V.N., Kshumanev S.V.
|
| Vol 17, No 3 (2018) |
Refinement of operable state recovery algorithms for “AIST” small satellites on the basis of telemetric information |
(Rus)
|
|
Volgin S.S., Salmin V.V., Tkachenko S.I., Tkachenko I.S., Ivanushkin M.A.
|
| Vol 17, No 3 (2018) |
Refining methods of vibration diagnostics of wear of turbo-prop engine differential speed reduction unit gear teeth |
(Rus)
|
|
Avramenko A.A., Kryuchkov A.N., Plotnikov S.M., Sundukov E.V., Sundukov A.E.
|
| Vol 13, No 4 (2014) |
Regenerative air-water heat exchanger with improved heat exchange ability |
(Rus)
|
|
Dostovalova S.S., Serebryakov R.A., Batukhtin S.G., Batukhtin A.G.
|
| Vol 5, No 1 (2006) |
Regional strategy and clusters |
(Rus)
|
|
1 1., 1 1.
|
| Vol 17, No 1 (2018) |
Relation between characyeristics of low-cycle and high-cycle fatigue of threaded parts and residual stresses |
(Rus)
|
|
Zlobin A.S.
|
| Vol 16, No 4 (2017) |
Relation between flame chemiionization and variable-volume combustion chamber temperature and pressure |
(Rus)
|
|
Shaikin A.P., Galiev I.R.
|
| Vol 14, No 4 (2015) |
Relationship between carbon concentration in a fuel and characteristics of flame propagation with a magnitude of ion current |
(Rus)
|
|
Shaykin A.P., Budaev S.I., Galiev I.R.
|
| Vol 18, No 2 (2019) |
Relative equilibria of dynamically symmetric CubeSat nanosatellite under the action of aerodynamic and gravitational torques |
(Rus)
|
|
Barinova E.V., Timbai I.A.
|
| Vol 5, No 2-1 (2006): Special Issue |
Relaxation non-linear damping as the basis of engine elements and units operational analysis |
(Rus)
|
|
1 1.
|
| Vol 8, No 2 (2009) |
Reliability indicators of information control systems with hardware and software failures as complex time functions |
(Rus)
|
|
Maryukhnenko V.S.
|
| Vol 23, No 2 (2024) |
Reliability-oriented design of PCM thermodimensionally stable space structures |
(Rus)
|
|
Klimakova L.A.
|
| Vol 10, No 3-2 (2011): Special Issue |
Repair of aircraft engine and respective conception under the condition of modern production at manufacturing plants and engine operability recovery centers |
(Rus)
|
|
Steshenko I.G., Panov V.A.
|
| Vol 8, No 1 (2009) |
Reputation of enterprises competing in the market from the point of view of consumers |
(Rus)
|
|
Ivanov D.Y., Kirilina Y.V.
|
| Vol 14, No 3-1 (2015): Special Issue |
Requirements for the order and the procedure of estimating structural strength characteristics of metal alloys for the main and critical parts of aviation gas turbine engines |
(Rus)
|
|
Nozhnitsky Y.A., Kachanov E.B., Golubovskiy E.R., Kouevda V.K.
|
| Vol 10, No 3-1 (2011): Special Issue |
Requirements to quality superficial lauer of details GTE |
(Rus)
|
|
Petukhov A.N.
|
| Vol 12, No 3-2 (2013): Vestnik SSAU |
Research and optimization of parameters of a system controlling the process of tube inside surface coating |
(Rus)
|
|
Skvortsov B.V., Zaretskaya M.I., Kurylyova P.A.
|
| Vol 10, No 3-3 (2011): Special Issue |
Research and optimization of the choice sound-absorbing structures |
(Rus)
|
|
Postnov V.I., Vyakin V.N., Veshkin E.A.
|
| Vol 8, No 3-3 (2009): Special Issue |
Research and rationing admissible nick on working blades of the compressor for engine NK-12 example |
(Rus)
|
|
1 1., 1 1., 1 1., 1 1.
|
| Vol 11, No 7 (2012) |
Research methodology of radio electronic development of early theoretical methods in the design |
(Rus)
|
|
Zatylkin A.V., Golushko D.A., Lysenko A.V.
|
| Vol 14, No 3 (2014) |
Research of a heat-resistant intermetallic underlayer for the heat-shielding coating of gas turbine engine turbine blades |
(Rus)
|
|
Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fel Y.A., Krivina L.A.
|
| Vol 14, No 4 (2015) |
Research of a pulse wave sphygmographic transducer |
(Rus)
|
|
Fedotov A.A., Akulova A.S.
|
| Vol 8, No 3-1 (2009): Special Issue |
Research of a seal work as an element of the air engine support |
(Rus)
|
|
Vinogradov A.S., Rempel A.P.
|
| Vol 14, No 2 (2015) |
Research of a sleeve connection of the aircraft pipeline under the influence of dynamic loading |
(Rus)
|
|
Agafonov V.M., Pykhalov A.A.
|
| Vol 5, No 2-2 (2006): Special Issue |
Research of acoustic characteristics of material МR |
(Rus)
|
|
Igolkin A.A., Izzheurov E.A., Hunuan C., Gouchi U.
|
| Vol 10, No 7 (2011) |
Research of aperture characteristics of small length optical fibers |
(Rus)
|
|
Paranin V.D., Dashkov M.V.
|
| Vol 10, No 3-3 (2011): Special Issue |
Research of changes in shape and location ring details with small rigidity |
(Rus)
|
|
Galuzina T.V., Polyakov A.V.
|
| Vol 10, No 5 (2011) |
Research of current and power interchange of swirled fluid streams in a hydraulic heat gentrator |
(Rus)
|
|
Belozertsev V.N.
|
| Vol 10, No 6 (2011) |
Research of dynamic parameters of hot forging on hammers with freely falling parts |
(Rus)
|
|
Shitarev I.L., Khaimovich A.I.
|
| Vol 9, No 1 (2010) |
Research of dynamics of initiation, propagation, growth and closure of bubble cavities and a supercavity in a pipe with decontaminated liquid under hydraulic impacts |
(Rus)
|
|
1 1.
|
| Vol 10, No 2 (2011) |
Research of errors of measuring angular location parameters of holes in turbine and compressor discs of gas turbine engines |
(Rus)
|
|
Bolotov M.A., Zhidyaev A.N., Shitarev I.L., Cheveleva A.O.
|
| Vol 11, No 3-3 (2012): Special Issue |
Research of features of technological processes of formation of properties of assembly units of aircraft |
(Rus)
|
|
Grechnikov F.V., Tlustenko S.F.
|
| Vol 10, No 5 (2011) |
Research of flame distribution speed, width of the zone and intensity of chemical reactions of combustion in the spark-ignition engine |
(Rus)
|
|
Bobrovskiy I.N., Shaykin A.P., Brizgalov A.A., Sukhov S.A.
|
| Vol 13, No 5-2 (2014): Special Issue |
Research of gas turbine engine operation in dust-filled atmosphere |
(Rus)
|
|
Abdullin B.R., Akmaletdinov R.G., Goumerov K.S., Nigmatullin R.R.
|
| Vol 10, No 2 (2011) |
Research of gasodynamic seal characteristics under transient conditions of aircraft engines and power plants |
(Rus)
|
|
Vinogradov A.S.
|
| Vol 12, No 2 (2013) |
Research of growth rate of fatigue cracks in aluminum AK6 alloy depending on tension characteristics in the field of their progress |
(Rus)
|
|
Aistov I.P., Vansovich K.A., Kruchkov A.N.
|
| Vol 18, No 2 (2019) |
Research of hafnium-containing defects in granular nickel EP741NP alloy using electron microscopy |
(Rus)
|
|
Trunkin I.N., Artamonov M.A., Ovcharov A.V., Vasiliev A.L.
|
| Vol 14, No 3-1 (2015): Special Issue |
Research of hydrodynamic processes in the lubrication system of gas turbine engines |
(Rus)
|
|
Gulienko A.I., Shchurovskiy Y.M.
|
| Vol 5, No 2-2 (2006): Special Issue |
Research of influence of azimuthal orientation of monocrystal on frequency characteristics and forms of oscillations |
(Rus)
|
|
1 1., 1 1., 1 1.
|
| Vol 11, No 3-1 (2012): Special Issue |
Research of influence of methods SPD on stpucture surface layer and resistance of fatigue |
(Rus)
|
|
Volkov A.N., Sazonov M.B., Schigrinyev I.A.
|
| Vol 11, No 3-3 (2012): Special Issue |
Research of influence of the thermal stream from the mid-flight liquid rocket engine on parameters of operating liquid rocket engines of small draught in the conditions of perspective razgonnogo's propulsion system of the block |
(Rus)
|
|
Ageenko Y.I., Galperin R.N., Ivashin Y.S., Nigodjuk V.E., Ryzhkov V.V., Sulinov A.V.
|
| Vol 11, No 3-1 (2012): Special Issue |
Research of influence the processes to afterhardening glass transition temperature of PKM |
(Rus)
|
|
Postnov V.I., Burhan O.L., Rahmatullin A.E., Mantusova O.Y., Nikitin E.K.
|
| Vol 1, No 1 (2002) |
Research of influencing of air delivery in a suction pipe line of the centrifugal pump on its vibroacoustical response |
(Rus)
|
|
Igolkin A.A., Kruchkov A.N., Prokofiev A.B., Shakhmatov E.V.
|
| Vol 1, No 1 (2002) |
Research of influencing of air delivery in a suction pipe line of the centrifugal pump on its vibroacoustical response |
(Rus)
|
|
Igolkin A.A., Kruchkov A.N., Prokofiev A.B., Shakhmatov E.V.
|
| Vol 8, No 3-2 (2009): Special Issue |
Research of laws of interaction of components in a liquid phase self-igniting liquid rocket fuel |
(Rus)
|
|
1 1., 1 1.
|
| Vol 15, No 4 (2016) |
Research of liquid outflow from low-emission swirl injectors of a low-thrust liquid rocket engine |
(Rus)
|
|
Semkin Y.V.
|
| Vol 13, No 5-3 (2014): Special Issue |
Research of machinability of heat resistant steels 10Х11НN23T3MР-ВД used in parts of gas turbine engines |
(Rus)
|
|
Surkov O.S., Kondratiev A.I., Alexeev V.P., Haymovich A.I.
|
| Vol 8, No 3-2 (2009): Special Issue |
Research of methods for protection the surface of cryogenic tanks from ice formation |
(Rus)
|
|
1 1., 1 1., 1 1.
|
| Vol 11, No 5-1 (2012): Special Issue |
Research of notch radius and depth influence on residual stresses distribution character in the smallest cross-section of surface hardened detail |
(Rus)
|
|
Sazanov V.P., Larionova Y.S.
|
| Vol 9, No 4 (2010) |
Research of planar motion of spacecraft around its center of mass under the influence of the gravitational and the aerodynamic moments during its descent from circular orbits |
(Rus)
|
|
Glukhova L.V., Timbay I.A.
|
| Vol 11, No 5-2 (2012): Special Issue |
Research of possibilities to obtain high-alloy aluminummagnesium alloys |
(Rus)
|
|
Grechnikov F.V., Popov I.P., Bibikov A.M., Demyanenko E.G.
|
| Vol 11, No 3-3 (2012): Special Issue |
Research of radial face contact seal tightness in the support of the aircraft engine compressor at various operational modes |
(Rus)
|
|
Vinogradov A.S., Badykov R.R., Shpakov I.D.
|
| Vol 14, No 3-2 (2015): Special Issue |
Research of repeatability of characteristics of multilayered corrugated dampers of aircraft and rocket engines using the Monte-Carlo method |
(Rus)
|
|
Ponomaryov Y.K.
|
| Vol 20, No 1 (2021) |
Research of restrained bending of aircraft parts with curved sides |
(Rus)
|
|
Gromova E.G., Moiseev V.K., Sharov A.A., Lomovskoi O.V., Mantusov М.N., Plotnikov A.N.
|
| Vol 11, No 3-1 (2012): Special Issue |
Research of rotor dynamic of GTE with nonlinear stiffness of elastic elements in support parts |
(Rus)
|
|
Leontyev M.K., Tereshko A.G.
|
| Vol 8, No 3-2 (2009): Special Issue |
Research of roughness of surface rollers with modified contact on the basis of analysis of thear autocorrelation functions |
(Rus)
|
|
Nosov N.V., Abramov A.D., Haustov V.I.
|
| Vol 14, No 3-2 (2015): Special Issue |
Research of serviceability of pulsed face seals with pumpback structures |
(Rus)
|
|
Vinogradov A.S., Badykov R.R., Anokhin D.V.
|
| Vol 13, No 5-1 (2014): Special Issue |
Research of shaft seals made of porous wire «metal rubber» material |
(Rus)
|
|
Zhizhkin A.M., Zrelov V.A., Zrelov V.V., Ardakov A.Y., Osipov A.A.
|
| Vol 14, No 1 (2015) |
Research of small spacecraft dynamiсs taking into account the influence of elastic vibrations of asjacent solar panels and aerodynamic moment |
(Rus)
|
|
Yelenev V.D., Titov B.A., Davydov E.I., Davydov I.E., Kochyan A.G., Yudintsev V.V.
|
| Vol 9, No 4 (2010) |
Research of spatial motion of an uncontrolled spacecraft with the triharmonic moment characteristics around its center of mass during its reentry into atmosphere |
(Rus)
|
|
Barinova Y.V., Timbay I.A.
|
| Vol 11, No 5-2 (2012): Special Issue |
Research of technological heredity influence on setting of procedure of measurements on coordinate-measurement machine in case of out-of-flatness detecting for aircraft engineering parts |
(Rus)
|
|
Cheveleva A.O., Bolotov M.A.
|
| Vol 13, No 1 (2014) |
Research of textural features for the diagnostics of nephrological diseases using ultrasound images |
(Rus)
|
|
Gaidel A.V., Larionova S.N., Khramov A.G.
|
| Vol 15, No 3 (2016) |
Research of the coefficient of reflection of the electromagnetic pulse from thin films and nanomaterials |
(Rus)
|
|
Skvortsov B.V., Zhivonosnovskaya D.M.
|
| Vol 14, No 3-1 (2015): Special Issue |
Research of the crack development process in a nickel heat-resistant alloyin the process of testing |
(Rus)
|
|
Rozanov M.A.
|
| Vol 14, No 3 (2014) |
Research of the dynamics of condensed product deposition |
(Rus)
|
|
Tsaplin S.V., Bolychev S.A.
|
| Vol 10, No 3-2 (2011): Special Issue |
Research of the fan blades flutter on the stalling airflow mode |
(Rus)
|
|
Khorikov A.A., Danilkin S.Y.
|
| Vol 13, No 5-1 (2014): Special Issue |
Research of the influence of design parameters of a 400 N-thrust low-thrust liquid rocket engine on its energy efficiency |
(Rus)
|
|
Ageenko Y.I., Ilyin R.V., Pegin I.V.
|
| Vol 18, No 4 (2019) |
Research of the influence of electron beam welding of titanium alloys on hydrogen distribution in the weld |
(Rus)
|
|
Muravyev V.I., Bakhmatov P.V., Grigorev V.V., Shakirova O.G., Iskhakov S.A.
|
| Vol 13, No 5-1 (2014): Special Issue |
Research of the influence of the diamond burnishing process parameters on the surface roughness of a steel 15CR12NI2MOVWANB-S workpiece when using an indenter made of natural diamond |
(Rus)
|
|
Shvetsov A.N., Skuratov D.L.
|
| Vol 13, No 1 (2014) |
Research of the mechanism of shock-inertial deposition of dispersed particles from a gas flow |
(Rus)
|
|
Usmanova R.R., Zhernakov V.S.
|
| Vol 18, No 1 (2019) |
Research of the operability of an air-fuel lubrication and cooling system of gas turbine engine rotor bearings |
(Rus)
|
|
Klimov V.N., Dud’ev D.Y., Sigaylo V.Y., Klimov N.I., Mashkov Y.K.
|
| Vol 10, No 3-3 (2011): Special Issue |
Research of the possibility of thermal conditions LREST using an infrared thermal imaging system |
(Rus)
|
|
Ryzhkov V.V., Silyutin M.V.
|
| Vol 10, No 3-2 (2011): Special Issue |
Research of the postoperational condition of the restored compressor shovels of GTD gas-transfer of the units which have fulfilled the appointed resource |
(Rus)
|
|
Tarasenko Y.P., Tsareva I.N., Krivina L.A.
|
| Vol 10, No 5 (2011) |
Research of the process of cleaning gas from mechanical impurities in a direct flow centrifugal separator |
(Rus)
|
|
Glebov G.A., Hazbulatov A.I.
|
| Vol 11, No 1 (2012) |
Research of the process of sheet presswork using polyurethane under constrained bending |
(Rus)
|
|
Eskina E.V., Gromova E.G.
|
| Vol 5, No 2-1 (2006): Special Issue |
Research of the quantitative characteristics technologies of manufacturing of products from a material МR |
(Rus)
|
|
1 1., 1 1., 1 1.
|
| Vol 13, No 5-4 (2014): Special Issue |
Research of the validity of forecasting low cycle durability of gas turbine engine parts based on Manson’s equation |
(Rus)
|
|
Porter А.M., Bukatyi S.A., Leshin D.P.
|
| Vol 8, No 3-2 (2009): Special Issue |
Research of the wet condition in fuel tanks of high weight booster rockets during storage and aviation transportation periods |
(Rus)
|
|
1 1., 1 1., 1 1.
|
| Vol 10, No 3-4 (2011): Special Issue |
Research of the workability of special materials electroerosive method |
(Rus)
|
|
Koshelev V.V., Smirnov G.V.
|
| Vol 10, No 5 (2011) |
Research of the zone of plasmachemical reactions in a supersonic air flow in the presence of nonquilibrium electric discharge |
(Rus)
|
|
Yefimov B.G., Ivanov V.V., Inshakov S.I., Skvortsov V.V., Starodubtsev M.A.
|
| Vol 10, No 5 (2011) |
Research of toxic substances emission during water injection into a combustion chamber |
(Rus)
|
|
Mingazov B.G., Mukhametgaliev T.H.
|
| Vol 5, No 2-1 (2006): Special Issue |
Research of vibration intensity of elastic metal-plastic sliding bearings with water lubrication on turbo-generator K100-90 of the "Slavic" state district power station and feed-pump PEN-11 of the "Bezimyanskaya" thermal power station |
(Rus)
|
|
1 1., 1 1.
|
| Vol 20, No 4 (2021) |
Research on end mill vibration in machining of VT9 titanium alloy |
(Rus)
|
|
Sazonov M.B., Zhidyaev A.N.
|
| Vol 11, No 5-2 (2012): Special Issue |
Research the influence of zinc coating on corrosion resistance of materials for hydroaviation |
(Rus)
|
|
Melnikov A.A., Bondareva O.S., Kiseleva O.S.
|
| Vol 11, No 3-1 (2012): Special Issue |
Research vibrational fatigue properties of forward wings bay MPKM |
(Rus)
|
|
Postnov V.I., Postnova M.V., Mantusova O.Y.
|
| Vol 8, No 3-2 (2009): Special Issue |
Researching error of blade locating in mechanism the POMKL–BLIK fixture by the system of approximate analysis of double-dimensional densities of probability |
(Rus)
|
|
1 1., 1 1., 1 1., 1 1.
|
| Vol 17, No 3 (2018) |
Residual stress optimization of technological processes with the aim of ensuring adhesion of nickel or chromium coatings on parts made of titanium alloys |
(Rus)
|
|
Bukaty A.S.
|
| Vol 11, No 5-1 (2012): Special Issue |
Residual stresses and endurance strength in the specimens with V-shaped notches made of ВНС40 steel |
(Rus)
|
|
Kirpichev V.A., Saushkin M.N., Sazanov V.P., Semyonova O.Y.
|
| Vol 10, No 1 (2011) |
Residual stresses and fatigue resistance of surface-hardened notched cylindrical specimens made of steel 20 |
(Rus)
|
|
Semyonova O.Y.
|
| Vol 17, No 1 (2018) |
Residual stresses and fatigue resistance of toothed wheels |
(Rus)
|
|
Vakulyuk V.S., Kovalkin Y.P., Sazanov V.P., Shadrin V.K.
|
| Vol 5, No 3 (2006) |
Residual stresses and limiting amplitude of strengthened parts with concentrators in case of asymmetric cycle |
(Rus)
|
|
1 1.
|
| Vol 11, No 3-3 (2012): Special Issue |
Residual stresses distribution regularities in the smallest section of hardened hollow cylindrical detail with circular cut |
(Rus)
|
|
Sazanov V.P., Larionova Y.S., Kolychev S.A.
|
| Vol 10, No 3-3 (2011): Special Issue |
Residual stresses in the specimens with opennings imitating openings for coupling bolt into the turbine of jet engines |
(Rus)
|
|
Vakuljuk V.S., Kirpichyev V.A., Pavlov V.F., Sazanov V.P.
|
| 2001 - 2100 of 2673 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 > >> |
