Email this article 
Research of the process of cleaning gas from mechanical impurities in a direct flow centrifugal separator
- Authors: Glebov G.A.1, Hazbulatov A.I.1
-
Affiliations:
- Kazan national research technical university named after A. N. Tupolev
- Issue: Vol 10, No 5 (2011)
- Pages: 72-77
- Section: ISSUE WITHOUT SECTION
- URL: https://journals.ssau.ru/vestnik/article/view/2740
- DOI: https://doi.org/10.18287/2541-7533-2011-0-5(29)-72-77
- ID: 2740
Cite item
Full Text
Abstract
New data on the flow structure and the fundamental characteristics of a direct-flow centrifugal separator are obtained on the basis of experimental and calculation research. The influence of the vortex chamber length, separation slot width, presence or absence of sucking the gathered particles from the container, as well as the size of particles on the efficiency of cleaning gas from mechanical impurities is established.
About the authors
G. A. Glebov
Kazan national research technical university named after A. N. Tupolev
Author for correspondence.
Email: Glebov_G_A@mail.ru
Doctor of Technical Sciences
Professor of the Department of Special Engines
Russian FederationA. I. Hazbulatov
Kazan national research technical university named after A. N. Tupolev
Email: hazbulatov_artur@mail.ru
Postgraduate Student of the Department of Special Engines
Russian FederationReferences
Supplementary files
