Search

Developing models of information-analytical monitoring system design, engineering and manufacturing processes aircraft companies

Zheleznov O.V., Blyumenshteyn A.A., Chernikov M.S.

(Rus)

Vol 22, No 3 (2023)

Comparison of quasi-three-dimensional and full three-dimensional formulations of thrust bearing operation

Sokolov N.V., Khadiev M.B., Fedotov P.E., Fedotov E.M.

(Rus)

Vol 22, No 3 (2023)

Modal analysis of a spacecraft solar panel

Kryuchkov A.N., Safin A.I., Ermilov M.A., Vidyaskina A.N., Igolkin A.A., Ye. V. Shakhmatov Y.V.

(Rus)

Vol 23, No 2 (2024)

Improving the accuracy of industrial robot movements in the process of incremental shaping

Sazonnikova N.A., Ilyukhin V.N., Surudin S.V., Mezentsev D.A.

(Rus)

Vol 10, No 3-2 (2011): Special Issue

Compressor blade erosion modeling

Gumerov A.V., Akmaletdinov R.G.

(Rus)

Vol 23, No 2 (2024)

Investigation of the dynamic characteristics of the pneumatic-mechanical drive of the installation movements of machine mechanisms

Prikhodko S.P., Sidorenko V.S., Korotych D.A.

(Rus)

Vol 22, No 1 (2023)

Development of an experimental plant and a numerical model of an axial magnetic rotor suspension

Benedyuk M.A., Lomachev A.O., Badykov R.R., Bezborodova K.V., Yurtaev A.A.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Methodology complex of hardware-in-the-loop functional modelling of gas turbines and its systems

1 1., 1 1., 1 1., 1 1., 1 1.

(Rus)

Vol 23, No 2 (2024)

Automation of the process of testing on-board systems of unmanned aerial vehicles

Kirillov A.V., Sitnikov V.V., Tuchin A.L.

(Rus)

Vol 20, No 2 (2021)

Model for evaluating the end runouts of a rotor with parallel connections of parts

Grachev I.A., Kudashov E.V., Bolotov M.A., Pronichev N.D.

(Rus)

Vol 19, No 2 (2020)

Mathematical modeling of the process of selective laser melting of Ti-6Al-4V titanium alloy powder

Agapovichev A.V., Sotov A.V., Smelov V.G.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Research of machinability of heat resistant steels 10Х11НN23T3MР-ВД used in parts of gas turbine engines

Surkov O.S., Kondratiev A.I., Alexeev V.P., Haymovich A.I.

(Rus)

Vol 11, No 6 (2012)

Models of economic agents’ interaction in conditions of an asymmetric information structure

Yakunin A.M.

(Rus)

Method of producer 3D parametric models of sample parts in SIEMNES NX

Goryachkin E.S., Rjazanov A.I., Urlapkin A.V., Chempinskiy L.A.

(Rus)

Vol 12, No 1 (2013)

Mathematical model of training and self-training in maintenance of complicated systems

Koptev A.N., Popovich A.A.

(Rus)

Vol 23, No 1 (2024)

Neural network controller of a gas turbine plant low emission combustor

Avgustinovich V.G., Kuznetsova T.A., Sukharev A.A.

(Rus)

Automatization of creation vane 3D-model in Ansys TurboGrid with geometry data in traditional view

Dmitrieva I.B., Shabliy L.S.

(Rus)

Vol 16, No 2 (2017)

Numerical method of determining creep model parameters within the first two stages of creep

Zoteev V.E., Makarov R.Y.

(Rus)

Vol 14, No 2 (2015)

Strength analysis of internal combustion engine elements by using ANSYS with taking into account heat processes in the combustion chamber

Biryuk V.V., Gorshkalev A.A., Kayukov S.S., Saigakov E.A.

(Rus)

Simulation design, kinematic and dynamic analysis of "virtual piston engine"

Gvozdev A.S., Melentjev V.S.

(Rus)

Vol 12, No 1 (2013)

Development of a structural and algorithmic model of pur-poseful actions of experts in maintenance and repair

Koptev A.N., Popovich A.A.

(Rus)

Vol 23, No 1 (2024)

Mathematical model of a generalized quadcopter kinematic scheme and its software implementation

Zelenskiy V.A., Kovalev M.A., Ovakimyan D.N., Kirillov V.S.

(Rus)

Vol 21, No 4 (2022)

Approximate models of air transport queueing systems with partial mutual assistance between service channels

Romanenko V.A.

(Rus)

Vol 17, No 2 (2018)

Modal analysis of the dynamic mockup of “AIST–2D” small spacecraft

Igolkin A.A., Safin A.I., Filipov A.G.

(Rus)

Vol 10, No 4 (2011)

Development of a multiparameter model of an optimum coherent system of incentives for workers of aircraft construction enterpricses

Ivanov D.Y.

(Rus)

Vol 22, No 4 (2023)

Comparative analysis of turbulence model influence in numerical simulation of an experimental radial compressor stage

Eremenko V.V., Mikhailov A.E., Mikhailova A.B., Goryukhin M.O., Krasnoperov D.G.

(Rus)

Vol 10, No 7 (2011)

Forecasting technique of semiconductor diodes quality indicators

Kozlova I.N., Tyulevin S.V., Tokareva A.V.

(Rus)

Development of automated systems LC UPD

Blyumenshteyn A.A., Chernikov M.S., Zheleznov O.V.

(Rus)

Vol 21, No 1 (2022)

Model of virtual balancing of rigid rotors

Khaimovich A.I., Bolotov M.A., Pechenina E.Y.

(Rus)

Vol 19, No 4 (2020)

Determination of loads on perforated tank partition

Filipov A.G., Glazkov I.E.

(Rus)

Vol 10, No 6 (2011)

Mathematical model of anisotropic elastic-plastic material

Grechnikov F.V., Yerisov Y.A.

(Rus)

Automatization of creation vane models for CAE with PROFILER

Shabliy L.S., Dmitrieva I.B., Popov G.M.

(Rus)

Vol 10, No 1 (2011)

Leader competition in biological and social systems

Pivovarova A.S., Steryakov A.A.

(Rus)

Vol 21, No 1 (2022)

Mathematical model for calculating pressure in a pulsating combustion chamber

Solodovnikov A.V., Odentsov D.A., Kravtsov E.V., Golubyatnik V.V., Shcheblykin D.A.

(Rus)

Vol 19, No 3 (2020)

Improving the efficiency of aviation turbofan engines by using an intercooler and a recuperative heat exchanger

Omar H., Kuz'michev V.S., Tkachenko A.Y.

(Rus)

Vol 10, No 6 (2011)

Use of probability distribution mixes in airport simulation model

Romanenko V.A.

(Rus)

Investigation of resonant oscillations working plates in experimental models of pneumatic valve

Zhuravliov О.A., Komarov S.Y., Makaryants G.M., Sergeev R.N., Harchikova J.V.

(Rus)

Modeling of heat conduction process in porous MR material

Zhizhkin A.M.

(Rus)

Vol 17, No 4 (2018)

Development of methods for ensuring energy balance for the operation of mission equipment of “AIST”-series small satellites under conditions of power limitations

Ivanushkin M.A., Salmin V.V., Tkachenko S.I., Tkachenko I.S., Volgin S.S.

(Rus)

Vol 16, No 3 (2017)

Peculiarities of using additional low-power energy sources in the power supply system of small spacecraft

Kargu D.L., Beznyakov A.M., Nemirov A.V., Radionov N.V., Chudnovsky Y.A.

(Rus)

Vol 16, No 1 (2017)

Prospective lines of improving the process of evaluating the technical condition of aircraft hydraulic system working fluid

Koptev A.N., Gareyev A.M., Popelnyuk I.A.

(Rus)

Vol 15, No 2 (2016)

Using apriori information in interferometric processing of high resolution sar data

Ushenkin V.A., Egoshkin N.A.

(Rus)

Vol 10, No 7 (2011)

Method of accelerated test research soldered joints surface mount devices

Nasedkin A.V.

(Rus)

Vol 14, No 4 (2015)

Simulation of wire manufacturing production cycle

Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.

(Rus)

Vol 10, No 5 (2011)

Using an ionization probe removed from the sparking plug for the development of a two-zone ICE combustion model

Ivashin P.V., Rybakov M.P.

(Rus)

Vol 14, No 2 (2015)

Functional chart of a multichannel hydrologic-optical-chemical measuring complex and new measuring channels of hydrophysical parameters

Smirnov G.V., Olenin A.L.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Dynamic of the a safety vent valve

Makaryjants M.V., Kudyurov L.V., Mustafaev Y.K., Tumanov D.V.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

The influence of the shuttle effect on the intensification of heat losses in a Stirling engine

Savchenko V.A., Stolyarov S.P.

(Rus)

Vol 11, No 7 (2012)

Optimization of model positional harakterstik of the electromagnetic sensor of the linear peremeshchny

Tingaev V.S., Matyunin S.A., Mednikov V.A.

(Rus)

Information support of aviation embedded information and control systems lifecycle

Akimova T.E.

(Rus)

Vol 11, No 4 (2012)

Automated construction of a 3D plane model at the stage of technical proposals

Borgest N.M., Aleev R.H., Aksanian P.A., Gromov A.A.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

Test of kinematic model by pneumatic manipulator

Gribkov A.M., Shilin D.V., Filin I.P.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Calculation methodology of intermittent burning chamber main parameters

Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.

(Rus)

Vol 11, No 2 (2012)

Mathematical modeling of heat exchange on air cooling of a number of aluminum ingots

Gorshenin A.S.

(Rus)

Optimization of aircraft seven stage compressor first stages parameters

Popov G.M., Matveev V.N., Baturin O.V., Kolmakova D.A.

(Rus)

Vol 13, No 1 (2014)

Modeling static and dynamic characteristics of pressure reducing valves

Igolkin A.A.

(Rus)

Vol 10, No 1 (2011)

Calculating the parameters of eddy current converters when testing several samples of cylindrical shape

Gainullina G.M., Polulekh A.V.

(Rus)

Vol 9, No 2 (2010): Special Issue

Methods of measurement and calculation of microaccelerations onboard of low orbit space microgravitational platform

1 1., 1 1., 1 1.

(Rus)

Vol 8, No 4 (2009)

Plane high-speed particle transducer

Izyumov M.V., Syomkin N.D.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

The simplification of heat engines thermodynamics calculation with using of idaeal gas’ model

1 1., 1 1.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Formation of a structural calculated mesh the passage blade of the axial turbine in program GAMBIT

Baturin N.V., Baturin O.V., Matveev V.N.

(Rus)

Vol 8, No 1 (2009)

Simulation of automatic systems of controlling space vehicle drives

Zhuravlyova Y.V.

(Rus)

Vol 7, No 2 (2008)

Methods and models of autonomous control over Earth remote sensing spacecraft survivability

Akhmetov R.N.

(Rus)

Vol 12, No 1 (2013)

Mathematical modeling of dynamic processes in a hydraulic drive with a discrete regulator of liquid flow

Shakhmatov Y.V., Gimadiev A.G., Sverbilov V.Y., Sinyakov A.F.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Study of the mechanism of flame stabilization in aaluminum-air mixture

Egorov A.G., Tizilov A.S.

(Rus)

Vol 20, No 3 (2021)

Three-dimensional periodic thermoelastichydrodynamic modeling of hydrodynamic processes of a thrust bearing

Sokolov N.V., Khadiev M.B., Fedotov P.E., Fedotov E.M.

(Rus)

Vol 19, No 2 (2020)

Acoustic diagnostics of local damages of spur wheels in multi-shaft drive using neural network models

Parfiyevich A.N., Dragan A.V., Sokol V.A.

(Rus)

Vol 10, No 6 (2011)

Flexible geometrical model of pipeline

Gavrilov V.N.

(Rus)

Concept of construction of virtual lab for gas turbine engine testing

Rybakov V.N., Kuzmichev V.S., Tkachenko A.Y.

(Rus)

Aircraft engine design based on unified gas generator

Vinogradov A.S., Parovay Y.F., Mordvinov A.G., Popov D.V., Shirokov M.A.

(Rus)

Vol 10, No 3-2 (2011): Special Issue

Calculation of indicator diagram dynamic test at internalcombustion engine in KDAM environment

Kosenok B.B.

(Rus)

Vol 17, No 4 (2018)

Оptimization of gas turbine aircraft engine control throughout the engine service life

Gurevich O.S., Golberg F.D., Smetanin S.A., Trifonov M.E.

(Rus)

Vol 16, No 3 (2017)

Influence of turbulence models on calculated values of aircraft aerodynamic properties

Elisov N.A., Ishkov S.A., Shakhov V.G.

(Rus)

Vol 16, No 1 (2017)

Frequency characteristics of a coaxial gas damper for booster feed line

Odinokov D.A., Gimadiyev A.G.

(Rus)

Vol 15, No 2 (2016)

Method of lossless image compression in the Earth remote sensing systems

Petrov E.P., Kharina N.L., Sukhikh P.N.

(Rus)

Vol 10, No 7 (2011)

Quality forecasting solder joint electronic components

Shumskikh I.Y.

(Rus)

Vol 14, No 4 (2015)

Method of creating digital terrain models and its practical application as exemplified by Samara region

Anshakov G.P., Myatov G.N., Malinovskii V.A.

(Rus)

Vol 10, No 5 (2011)

Problems of design analysis of characteristics of a gas turbine engine working on natural gas

Gulina S.A., Orlov M.Y., Mikheyenkov E.L.

(Rus)

Vol 14, No 2 (2015)

ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing

Nuzhnov Y.V.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Computer-aided system of virtual gas turbine engine testing

Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Ostapuk Y.A., Filinov E.P.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

CFD-modeling of processes in a high-pressure oxidizer pump for the turbopump assembly of a liquid rocket engine

Zubanov V.M., Shabliy L.S.

(Rus)

Vol 11, No 7 (2012)

Real-time control algorithms requirements verification mathematical model implementation in visual design computer-aided system

Shulyndin A.V., Tjugashev A.A.

(Rus)

Comparison of mathematical simulation results and experimental research of PVD-K3-1 air pressure probe

Moiseev V.N., Dubinina M.M., Pavlovsky A.A., Sorokin M.Y.

(Rus)

Vol 11, No 3-3 (2012): Special Issue

Experimental research of vibrations of pipeline of GTD with support from MR for working off method of calculation in environment of ANSYS

Shvetsov A.V., Lezhin D.P., Ulanov A.M.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

The parameters of turbulence models and grids investigation on CFD results of plane turbine cascade

Zubanov V.M., Krivcov A.V., Shtraub A.A.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Linear mathematical model for the determination of rational treatment conditions on the diamond smoothing operations in the manufacture of aircraft parts

Skuratov D.L., Shvetsov A.N., Abulkhanov S.R.

(Rus)

Vol 11, No 1 (2012)

Classification of models of basic links in the air transport sector in the context of the process of macrologistic system formation and development

Pakhomov A.A.

(Rus)