Email this article 
Investigation of the dynamic characteristics of the pneumatic-mechanical drive of the installation movements of machine mechanisms
- Authors: Prikhodko S.P.1, Sidorenko V.S.1, Korotych D.A.1
-
Affiliations:
- Don State Technical University
- Issue: Vol 23, No 2 (2024)
- Pages: 132-142
- Section: MECHANICAL ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/27662
- DOI: https://doi.org/10.18287/2541-7533-2024-23-2-132-142
- ID: 27662
Cite item
Full Text
Abstract
The creation of new and improvement of existing machines and mechanisms requires the development of drive engineering and the creation of new drive systems capable of competing with currently known circuit solutions. Under these conditions, the creation of combined pneumatic-mechanical drives is an important scientific and technical task. The purpose of this work is to increase the speed at a given accuracy of auxiliary movements of the target mechanisms of technological machines by creating a pneumatic-mechanical drive with improved energy and dynamic characteristics. The technical solution of a positioning pneumatic-mechanical drive of executive movements of technological equipment is presented, mathematical and computer models are developed. In this case, the method of solving the differential equation in the SimInTech program is used. As a result, an oscillogram of transients is obtained. The developed models allow for dynamic analysis of pneumatic-mechanical systems.
About the authors
S. P. Prikhodko
Don State Technical University
Author for correspondence.
Email: sergey.161.96@gmail.com
ORCID iD: 0000-0003-4412-1659
Assistant Professor, Postgraduate Student of the Department of “Hydraulics, Hydraulic and Pneumatic Control Systems and Thermal Processes”
Russian FederationV. S. Sidorenko
Don State Technical University
Email: vsidorenko@donstu.ru
ORCID iD: 0000-0001-5124-6324
Doctor of Science (Engineering), Full Professor of the Department of “Hydraulics, Hydraulic and Pneumatic Control Systems and Thermal Processes”
Russian FederationD. A. Korotych
Don State Technical University
Email: daniilberuk@gmail.com
ORCID iD: 0000-0002-8772-5551
Assistant, Postgraduate Student of the Department of “Hydraulics, Hydraulic and Pneumatic Control Systems and Thermal Processes”
Russian FederationReferences
- Wang J., Gordon T. Energy optimal control of servo-pneumatic cylinders through nonlinear static feedback linearization. Journal of Dynamic Systems, Measurement, and Control. 2012. V. 134, Iss. 5. doi: 10.1115/1.4006084
- Dao The Anh. Pozitsionnyy pnevmoprivod povyshennogo bystrodeystviya i tochnosti. Dis. … kand. tekhn. nauk [Positioning pneumatic actuator of increased speed and accuracy. Thesis for a Candidate Degree (Engineering)]. Rostov-on-Don, 2016. 206 p.
- Mosadegh B., Polygerinos P., Keplinger C., Wennstedt S., Shepherd R.F., Gupta U., Shim J., Bertoldi K., Walsh C.J., Whitesides G.M. Pneumatic networks for soft robotics that actuate rapidly. Advanced Functional Materials. 2014. V. 24, Iss. 15. P. 2163-2170. doi: 10.1002/adfm.201470092
- Sidorenko V.S., Korotych D.A., Grishenko V.I., Kharchenko A.N. Simulation of pneumatic actuator position system for long stroke mounting movements. IOP Conference Series: Materials Science and Engineering. 2021. V. 1029. doi: 10.1088/1757-899X/1029/1/012039
- Dao T.A., Mazhidov R.N. Simulating the process of positioning an industrial robot pneumatic actuator. Molodezhnyy Nauchno-Tekhnicheskiy Vestnik. 2014. No. 6. (In Russ.)
- Prikhodko S.P., Sidorenko V.S., Kharchenko A.N., Grishenko V.I. High-speed pneumomechanical drive of the executive movements of machine mechanisms movements. IOP Conference Series: Materials Science and Engineering. 2021. V. 1029. doi: 10.1088/1757-899x/1029/1/012015
- Obukhova E.N., Grishchenko V.I. Modelirovanie dinamiki protsessa pozitsionirovaniya pnevmoprivoda dvustoronnego deystviya. Sbornik trudov IV Vserossiyskoy Nauchno-Tekhnicheskoy Konferentsii Molodykh Uchenykh, Aspirantov i Studentov «Intellektual'nye Sistemy, Upravlenie i Mekhatronika – 2018» (May, 29-31, 2018, Sevastopol). Sevastopol: Sevasopol State University Publ., 2018. P. 165-168. (In Russ.)
- Terryn S., Brancart J., Lefeber D., Assche G.V., Vanderborght B. Self-healing soft pneumatic robots. Science Robotics. 2017. V. 2, Iss. 9. doi: 10.1126/scirobotics.aan4268
- Gallyamov Sh.R., Starikov K.V., Celischev V.A. Experimental research of characteristics of the pneumatic actuator FESTO with proportional allocation of the expenditure. Vestnik UGATU. 2011. V. 15, no. 1 (41). P. 26-33. (In Russ.)
Supplementary files
