Mathematical model for calculating pressure in a pulsating combustion chamber


Cite item

Full Text

Abstract

Due to insufficient knowledge of the processes occurring in the chambers of pulsating combustion, as well as lack of mathematical dependencies that make it possible to fully describe the parameters of such chambers, the authors of this article present a model for calculating pressure fluctuations as a function of time. The resulting dependence is based on the fact that the combustion of fuel takes place according to an isochoric cycle, whereas the outflow of gas through a resonant tube is an isothermal process. The conditions for applying the mathematical model and its features are described. With the help of the above dependence, it is possible to trace the dynamics of pressure changes during the operation of a pulsating combustion chamber with different geometric parameters. A program is presented that implements the obtained dependence for calculating and comparing the obtained theoretical data with the studies of other authors.

About the authors

A. V. Solodovnikov

Branch of the Military Academy of Strategic Missile Forces named after Peter the Great

Author for correspondence.
Email: aleksey.solod@mail.ru

Candidate of Science (Engineering), Associate Professor, Colonel, Head of Department

Russian Federation

D. A. Odentsov

Branch of the Military Academy of Strategic Missile Forces named after Peter the Great

Email: skaut_1979@mail.ru

Faculty Instructor

Russian Federation

E. V. Kravtsov

Branch of the Military Academy of Strategic Missile Forces named after Peter the Great

Email: varvsn-serp@mil.ru

Lieutenant Colonel, Faculty Instructor

Russian Federation

V. V. Golubyatnik

Branch of the Military Academy of Strategic Missile Forces named after Peter the Great

Email: slava6123@rambler.ru

Candidate of Science (Engineering), Deputy Head of Department

Russian Federation

D. A. Shcheblykin

Voronezh State Technical University

Email: daniilsh.vrn@gmail.com
ORCID iD: 0000-0003-3821-6424

Postgraduate Student

Russian Federation

References

  1. Zarubin V.S. Matematicheskoe modelirovanie v tekhnike [Mathematical modeling in engineering]. Moscow: Bauman Moscow State Technical University Publ., 2003. 496 p.
  2. Belyaev E.N., Chvanov V.K., Chervakov V.V. Matematicheskoe modelirovanie rabochego protsessa zhidkostnykh raketnykh dvigateley [Mathematical modeling of the liquid-propellant rocket engine cycle]. Moscow: MAI Publ., 1999. 228 p.
  3. Sergeev S.M., Petrukhin N.V., Masyukov M.V. Experimental study of hydrocarbon fuel combustion in the air. Vestnik of the Samara State Aerospace University. 2015. V. 14, no. 2. P. 179-183. (In Russ.). doi: 10.18287/2412-7329-2015-14-2-179-183
  4. Bronshteyn I.N., Semendyaev K.A. Spravochnik po matematike dlya inzhenerov i uchashchikhsya vtuzov: ucheb. posobie [Handbook on mathematics for engineers and engineering students]. SPb: Lan' Publ., 2010. 608 p.
  5. Dobrovol'skiy M.V. Zhidkostnye raketnye dvigateli [Liquid-propellant rocket engines]. Moscow: Mashinostroenie Publ., 1968. 398 p.
  6. Kuchling H. Physik. Leipzig, 1980.
  7. Shaulov Yu.Kh., Lerner M.O. Gorenie v zhidkostnykh raketnykh dvigatelyakh [Combustion in liquid-propellant rocket engines]. Moscow: Oborongiz Publ., 1961. 196 p.
  8. Mayer R.V. Reshenie fizicheskikh zadach v elektronnykh tablitsakh Excel [Solving physical problems in Excel spreadsheet: study guide]. Glazov: Glazov State Pedagogical Institute Publ., 2016. 150 p.
  9. Zel'dovich Ya.B., Raizer Yu.P. Fizika udarnykh voln i vysokotemperaturnykh gidrodinamicheskikh yavleniy [Physics of shock waves and high-temperature hydrodynamic phenomena]. Moscow: Nauka Publ., 1966. 686 p.
  10. Severyanin V.S. Pul'siruyushchee gorenie, sposob intensifikatsii teplotekhnicheskikh protsessov. Dis. … doktora tekhn. nauk [Pulsating combustion, way of intensifying thermotechnical processes]. Brest, 1986. 435 p.
  11. Shabliy L.S., Krivtsov A.V., Kolmakova D.A. Komp'yuternoe modelirovanie tipovykh gidravlicheskikh i gazodinamicheskikh protsessov dvigateley i energeticheskikh ustanovok v ANSYS Fluent: ucheb. posobie [Computer modeling of standard hydraulic and gas-dynamic processes in engines and power plants in ANSYS Fluent: study guide]. Samara: Samara University Publ., 2017. 108 p.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2022 VESTNIK of Samara University. Aerospace and Mechanical Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies