| Issue |
Title |
File |
| Vol 16, No 4 (2017) |
Technological future of Russia: the challenge of the “third nature” |
(Rus)
|
|
Gorbunov D.V., Nesterov A.Y.
|
| Vol 16, No 4 (2017) |
Flow conditioning downstream a pressure collector |
(Rus)
|
|
Kalaev V.A., Khorobrov S.V.
|
| Vol 16, No 4 (2017) |
Investigation of hydraulic and vibroacoustic characteristics of a prospective valve with an elastic tubular element used as the working body |
(Rus)
|
|
Kryuchkov A.N., Romashov N.N., Ermilov M.A., Balyaba M.V.
|
| Vol 16, No 4 (2017) |
Relation between flame chemiionization and variable-volume combustion chamber temperature and pressure |
(Rus)
|
|
Shaikin A.P., Galiev I.R.
|
| Vol 16, No 3 (2017) |
Computational and experimental research of exhaust gas treatment systems |
(Rus)
|
|
Galevko V.V., Rakhmatov R.I.
|
| Vol 16, No 3 (2017) |
Advanced methods for assessing sealing ability of valve seals |
(Rus)
|
|
Kondrashov Y.I., Sergeev R.N.
|
| Vol 16, No 3 (2017) |
Experimental study of a method of reducing the drag of a circular cylinder by installing a flat plate |
(Rus)
|
|
Frolov V.A., Kozlova A.S.
|
| Vol 16, No 2 (2017) |
Numerical method of determining creep model parameters within the first two stages of creep |
(Rus)
|
|
Zoteev V.E., Makarov R.Y.
|
| Vol 16, No 2 (2017) |
New technologies of manufacturing non-rigid parts made of titanium alloys and stainless steels |
(Rus)
|
|
Kiselev E.S., Blagovskiy O.V.
|
| Vol 16, No 2 (2017) |
Numerical modeling and experimental research of a two-phase liquid- gas ejector with a profiled supersonic nozzle |
(Rus)
|
|
Lepeshinsky I.A., Reshetnikov V.A., Zarankevich I.A.
|
| Vol 16, No 2 (2017) |
Method and algorithm of decomposition for the synthesis of programs of control of electrical equipment complex objects |
(Rus)
|
|
Myasnikova J.V.
|
| Vol 16, No 1 (2017) |
Dynamics of feed water flow rate control system with low- noise regulator |
(Rus)
|
|
Berestovitskiy E.G., Kizilov P.I., Kruchkov A.N., Pialov N.V.
|
| Vol 16, No 1 (2017) |
Influence of assembly conditions on the stressed-stained state of damper support elastic rings |
(Rus)
|
|
Diligensky D.S., Novikov D.K.
|
| Vol 16, No 1 (2017) |
Prospective lines of improving the process of evaluating the technical condition of aircraft hydraulic system working fluid |
(Rus)
|
|
Koptev A.N., Gareyev A.M., Popelnyuk I.A.
|
| Vol 16, No 1 (2017) |
Types of aeroelastic vibrations of turbomachinery bladed discs |
(Rus)
|
|
Koskin A.O., Seleznev V.G.
|
| Vol 16, No 1 (2017) |
Mathematical models of squeeze film dampers in rotor dynamics of gas turbine engines |
(Rus)
|
|
Kutakov M.N., Degtiarev S.A., Leontiev M.K.
|
| Vol 16, No 1 (2017) |
Evaluation of low cycle fatigue based on the use of Coffin-Manson dependence under zero-to-“soft” loading cycle |
(Rus)
|
|
Pavlov V.F., Kirpichyov V.A., Kocherova E.E., Zlobin A.S.
|
| Vol 16, No 1 (2017) |
On the efficiency of a radiant heating regenerative system |
(Rus)
|
|
Panchenko V.V.
|
| Vol 16, No 1 (2017) |
Selection of reference specimens for assessing the efficiency of part surface nitriding |
(Rus)
|
|
Sazanov V.V.
|
| Vol 16, No 1 (2017) |
Safety front shock damper (shock absorber) to protect containers in emergency falling |
(Rus)
|
|
Samokhin P.A., Bakhareva E.A., Potanin D.V.
|
| Vol 16, No 1 (2017) |
Dynamics of the hydromechanical system of a production machine with an adaptive tool-feeding drive |
(Rus)
|
|
Sidorenko V.S., Poleshkin M.S., Rakulenko S.V.
|
| Vol 16, No 1 (2017) |
Influence of crack depth on the stress intensity coefficient in notched and smooth plates |
(Rus)
|
|
Surgutanov N.A.
|
| Vol 15, No 4 (2016) |
Technique of compensating errors in machining of parts with sculptured surfaces |
(Rus)
|
|
Pechenin V.A.
|
| Vol 15, No 4 (2016) |
Curcuit-design solutions for producing devices of feed water flow rate control systems |
(Rus)
|
|
Berestovitsky E.G., Gladilin Y.A., Pyalov N.V., Solovyev M.V., Ermilov M.A.
|
| Vol 15, No 4 (2016) |
Analysis of heat transfer in a helically coiled cooler of a mechatronic sample conditioning system |
(Rus)
|
|
Gimadiev A.G., Utkin A.V.
|
| Vol 15, No 4 (2016) |
Mathematical models for evaluating the energy efficiency of ultralow power turbine drives |
(Rus)
|
|
Kalabuhov D.S., Grigoryev V.A., Rad’ko V.M.
|
| Vol 15, No 4 (2016) |
Morphological characteristics of the intermetallic phase of heat resisting nickel alloys |
(Rus)
|
|
Kirikov S.V., Perevezentsev V.N., Tarasenko Y.P.
|
| Vol 15, No 4 (2016) |
Dependence of methane laminar flame propagation speed on the pressure and initial temperature |
(Rus)
|
|
Lukachev S.V., Matveev S.G., Zubrilin I.A., Sigidaev A.V.
|
| Vol 15, No 4 (2016) |
Mathematical model of surface layer formation during hydroabrasive jet machining |
(Rus)
|
|
Meshcheryakov A.V., Shulepov A.P.
|
| Vol 15, No 4 (2016) |
Increasing the efficiency of rotary piston engines by the use of the diesel cycle |
(Rus)
|
|
Okorochkov V.V., Okorochkova V.M., Ravodin A.I.
|
| Vol 15, No 3 (2016) |
Development of the criteria of analyzing the stress-strain state of gas turbine engine parts in the elastoplastic range |
(Rus)
|
|
Bukaty A.S., Bukaty S.A.
|
| Vol 15, No 3 (2016) |
Improvement of adhesive properties and load capacity of the lubricant layer of friction units |
(Rus)
|
|
Gromakovsky D.G., Koptev A.A., Kryshen E.D., Haustov V.I., Shigin S.B.
|
| Vol 15, No 3 (2016) |
Laser powder weld reconditioning of gas turbine engine blades |
(Rus)
|
|
Korsmik R.S., Turichin G.A., Klimova-Korsmik O.G., Zemlyakov E.V., Babkin K.D.
|
| Vol 15, No 3 (2016) |
Experimental research of the closed-type gas-dynamic mixer |
(Rus)
|
|
Lepeshinsky I.A., Reshetnikov V.A., Zarankevich I.A., Istomin E.A., Antonovsky I.V., Guzenko A.A.
|
| Vol 15, No 3 (2016) |
Investigation of the gas turbine engine combustion chamber workflow |
(Rus)
|
|
Markushin A.N., Baklanov A.V.
|
| Vol 15, No 3 (2016) |
Influence of the burner form on the combustion chamber outlet temperature field ripple for different modes of operation of gas turbine engines |
(Rus)
|
|
Markushin A.N., Baklanov A.V.
|
| Vol 15, No 3 (2016) |
The influence of booster design features on aicraft engine fan tonal noise |
(Rus)
|
|
Khaletskiy Y.D., Korzhnev V.N., Pochkin Y.S.
|
| Vol 15, No 3 (2016) |
Influence of fluctuation velocity on the electric conductivity of hydrocarbon flames |
(Rus)
|
|
Shajkin A.P., Galiev I.R., Bobrovsky A.V.
|
| Vol 15, No 3 (2016) |
Using the phenomenon of electrical conduction of flame of non-homogeneous air-fuel mixture in design and development of combustion chamber |
(Rus)
|
|
Shajkin A.P., Ivashin P.V., Galiev I.R., Derjachev A.D., Tverdohljobov A.J.
|
| Vol 15, No 3 (2016) |
Suppression of gas-dynamic self-oscillations in the outflow line of a gas control valve |
(Rus)
|
|
Balyaba M.V., Ermilov M.A., Kryuchkov A.N., Shabanov K.U.
|
| Vol 15, No 2 (2016) |
Solid-phase growth and structure of barium disilicide films on Si (111) |
(Rus)
|
|
Dubov V.L., Fomin D.V., Galkin N.G.
|
| Vol 15, No 2 (2016) |
Double wavelength speckle interferometer for the research of static deformations of gas turbine engine parts |
(Rus)
|
|
Zhuzhukin A.I., Kolotnikov M.E., Solyannikov V.A.
|
| Vol 15, No 2 (2016) |
Development of a neural network model of a micro gas turbine engine |
(Rus)
|
|
Kuznetsov A.V., Makaryants G.M.
|
| Vol 15, No 2 (2016) |
Reducing pulse vibration of valves under transient conditions |
(Rus)
|
|
Kulichkova E.A.
|
| Vol 15, No 2 (2016) |
Empirical metod of predicting aviation piston engine noise |
(Rus)
|
|
Moshkov P.A.
|
| Vol 15, No 2 (2016) |
Study of uncertainty of measuring geometrical parameters of gas turbine engine compressor blade profiles |
(Rus)
|
|
Pechenin V.A., Bolotov M.V., Ruzanov N.V., Yanyukina M.V.
|
| Vol 15, No 1 (2016) |
Stewart platform pneumatic control system development and characteristic research |
(Rus)
|
|
Greshnyakov P.I.
|
| Vol 15, No 1 (2016) |
Perfecting the methodology of determining the flexibility matrix of the «squirrel cage» in rotor supports of aviation gas-turbine engines |
(Rus)
|
|
Degtyarev S.A., Leontiev M.K., Popov V.V.
|
| Vol 14, No 4 (2015) |
Relationship between carbon concentration in a fuel and characteristics of flame propagation with a magnitude of ion current |
(Rus)
|
|
Shaykin A.P., Budaev S.I., Galiev I.R.
|
| Vol 14, No 4 (2015) |
Analysis of temperature fields of aircraft components |
(Rus)
|
|
Azarenkov V.I.
|
| Vol 14, No 4 (2015) |
Study of characteristics of the vortex throttling valve for the sysytem of water sample conditioning |
(Rus)
|
|
Gimadiev A.G., Utkin A.V.
|
| Vol 14, No 4 (2015) |
Estimation of residual stress influence on the low-cycle fatigue of threaded parts |
(Rus)
|
|
Zlobin A.S.
|
| Vol 14, No 4 (2015) |
Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber |
(Rus)
|
|
Kocherova Е.Е.
|
| Vol 14, No 4 (2015) |
The influence of 3g and 4g vibration on the disperse structure of low-frequency and medium-frequency oscillation |
(Rus)
|
|
Levkin Y.S., Lushkin I.A.
|
| Vol 14, No 4 (2015) |
Investigation of preliminary surface rolling influence on the fatigue resistance of threaded specimens |
(Rus)
|
|
Sazanov V.P.
|
| Vol 14, No 4 (2015) |
Simulation of wire manufacturing production cycle |
(Rus)
|
|
Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.
|
| Vol 14, No 3 (2014) |
Application of thermoplastic hardening for restoration of fatigue durability of gas turbine disks |
(Rus)
|
|
Vishnyakov M.A.
|
| Vol 14, No 3 (2014) |
Peculiarities of distribution of dynamic disturbances in composite rods |
(Rus)
|
|
Karimbayev T.D., Mamayev S.
|
| Vol 14, No 3 (2014) |
Calculating sound insulation of a sandwich structure on the basis of the «inverse matrix» method |
(Rus)
|
|
Popov P.A., Osipov A.S., Sindyukov A.A.
|
| Vol 14, No 3 (2014) |
Deposition of aluminum coating on items made of high-strength steel by chemical vapor deposition of an organometallic compound with the use of a catalytical additive |
(Rus)
|
|
Pugin A.V., Gafurov I.I.
|
| Vol 14, No 3 (2014) |
Specific electrical conductivity of chromium plating and nickel plating electrolytes |
(Rus)
|
|
Salakhova R.K., Semenychev V.V., Tihoobrazov A.B.
|
| Vol 14, No 3 (2014) |
The nature of «black spots» formation on the surface of large parts made of aluminum alloys in the process of anodic oxidising |
(Rus)
|
|
Semenychev V.V., Salakhova R.K.
|
| Vol 14, No 3 (2014) |
Research of a heat-resistant intermetallic underlayer for the heat-shielding coating of gas turbine engine turbine blades |
(Rus)
|
|
Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fel Y.A., Krivina L.A.
|
| Vol 14, No 3 (2014) |
Universal approach to the description of working medium chambers for simulating hydraulic and pneumatic systems |
(Rus)
|
|
Timofeyev Y.M., Khalatov E.M.
|
| Vol 14, No 3 (2014) |
Research of the dynamics of condensed product deposition |
(Rus)
|
|
Tsaplin S.V., Bolychev S.A.
|
| Vol 14, No 3 (2014) |
Development of a low-emission bifuel combustion chamber |
(Rus)
|
|
Bubentsov A.V., Vasiluk D.K., Golubev P.A., Kirichenko R.E., Tashkinov V.A., Shoshin V.B.
|
| Vol 14, No 2 (2015) |
Statistical physics and cycles of operation of heat engines |
(Rus)
|
|
Mikheenkov E.L.
|
| Vol 14, No 2 (2015) |
ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing |
(Rus)
|
|
Nuzhnov Y.V.
|
| Vol 14, No 2 (2015) |
Research of a sleeve connection of the aircraft pipeline under the influence of dynamic loading |
(Rus)
|
|
Agafonov V.M., Pykhalov A.A.
|
| Vol 14, No 2 (2015) |
Numerical study of the characteristics of a double-circuit vortex tube in a stationary and a nonstationary settings |
(Rus)
|
|
Piralishvili S.A., Sokolova O.A.
|
| Vol 14, No 2 (2015) |
Characteristic of energy efficiency index and drawing intermediate conclusions on the reduction of consumption of energy resources at SSAU |
(Rus)
|
|
Anishchenkova E.I., Biryuk V.V., Anisimov M.Y.
|
| Vol 14, No 2 (2015) |
Experimental research of the possibility of heat transfer enhancement in gas dynamic energy separation process |
(Rus)
|
|
Popovich S.S., Vinogradov Y.A., Strongin M.M.
|
| Vol 14, No 2 (2015) |
Strength analysis of internal combustion engine elements by using ANSYS with taking into account heat processes in the combustion chamber |
(Rus)
|
|
Biryuk V.V., Gorshkalev A.A., Kayukov S.S., Saigakov E.A.
|
| Vol 14, No 2 (2015) |
Fuel spraying and mixing in a simulated combustion chamber in the presence of air flow precession |
(Rus)
|
|
Sviridenkov A.A., Tretyakov V.V.
|
| Vol 14, No 2 (2015) |
Experimental investigation of heat transfer in energy separation chambers of the vortex tube |
(Rus)
|
|
Veretennikov S.V., Barinov S.N.
|
| Vol 14, No 2 (2015) |
Experimental study of hydrocarbon fuel combustion in the air |
(Rus)
|
|
Sergeev S.M., Petrukhin N.V., Masyukov M.V.
|
| Vol 14, No 2 (2015) |
Simulation of the profile of a sample’s X-ray diffraction line in diffusion metal saturation |
(Rus)
|
|
Volkov V.V., Pokoev A.V.
|
| Vol 14, No 2 (2015) |
Identifying the causes of excessive vibration in gas turbine engines in the course of their rig tests |
(Rus)
|
|
Sundukov A.Y., Sundukov Y.V., Plotnikov S.M.
|
| Vol 14, No 2 (2015) |
Investigation of the seizing mechanism of aviation hydraulic drive spool–and–sleeves |
(Rus)
|
|
Gareyev A.M., Popelniuk I.A.
|
| Vol 14, No 2 (2015) |
Vibrodiagnostics of turboprop engine gearbox wear |
(Rus)
|
|
Sundukov A.Y., Sundukov Y.V., Plotnikov S.M.
|
| Vol 14, No 2 (2015) |
Determining the boundaries of ignition of aluminum particle aerosuspension in a high-velocity airflow |
(Rus)
|
|
Egorov A.G., Tizilov A.S.
|
| Vol 14, No 2 (2015) |
Experience of operational development of starting characteristics of the APU combustion chamber |
(Rus)
|
|
Chechulin A.Y.
|
| Vol 14, No 2 (2015) |
Experimental research of internal heat transfer in the vortex heat generator |
(Rus)
|
|
Zhornik M.N., Piralishvili S.A., Mogileva K.A.
|
| Vol 14, No 2 (2015) |
Calculation of displacements in a viscoelastic square plate with a round cut |
(Rus)
|
|
Ivanov E.Y.
|
| Vol 14, No 2 (2015) |
Analysis of the possibility of improving performance characteristics of a solenoid injector for the CommonRail system |
(Rus)
|
|
Kayukov S.S., Gallyamov R.E., Belousov A.V.
|
| Vol 14, No 2 (2015) |
The effect of the way of setting boundary conditions on the results of modeling a flow at the flameholder outlet |
(Rus)
|
|
Kolomzarov O.V., Anisimov V.M., Zubrilin I.A.
|
| Vol 14, No 2 (2015) |
Numerical and experimental study of the strength of fabric carbon-epoxy composite structures |
(Rus)
|
|
Komarov V.A., Kishov E.A., Charkviani R.V., Pavlov A.A.
|
| Vol 14, No 2 (2015) |
Numerical method for determining the parameters of a creep curve on the basis of Soderberg law |
(Rus)
|
|
Makarov R.Y.
|
| Vol 14, No 2 (2015) |
Determination of thermal state and modification of the flame tube cooling system with the help of three-dimensional modeling methods |
(Rus)
|
|
Matveev S.G., Anisimov V.M., Zubrilin I.A., Kolomzarov O.V., Mironov N.S.
|
| Vol 14, No 1 (2015) |
Common properties of hydrocarbon combustion products and Brayton cycle |
(Rus)
|
|
Mikheenkov E.L.
|
| Vol 14, No 1 (2015) |
Numerical simulation of heat transfer from a swirling flow to the lateral side of the vortex tube energy separation chamber |
(Rus)
|
|
Piralishvili S.A., Sokolova A.A.
|
| Vol 14, No 1 (2015) |
Computer-aided design of aircraft gas turbine engines and selection of materials for their main parts |
(Rus)
|
|
Akhmedzyanov D.A., Kishalov A.E., Markina K.V.
|
| Vol 14, No 1 (2015) |
Vortex cleaning of fuel tank pressurant gas |
(Rus)
|
|
Biryuk V.V., Shimanov A.A., Onoprienko D.A., Smorodin A.V., Shepelev A.I.
|
| Vol 14, No 1 (2015) |
Study of characteristics of the launch vehicle fuel line gas damper |
(Rus)
|
|
Gimadiev A.G., Odinokov D.A., Stadnik D.M., Greshnyakov P.I.
|
| Vol 14, No 1 (2015) |
Possibility of using a bi-directional impulse turbine in a thermo-acoustic engine |
(Rus)
|
|
Dovgjallo A.I., Shimanov A.A.
|
| Vol 14, No 1 (2015) |
Experimental study of free-convection flame propagation |
(Rus)
|
|
Yevdokimov O.A., Guryanov A.I.
|
| Vol 14, No 1 (2015) |
Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance |
(Rus)
|
|
Kostichev V.E.
|
| Vol 13, No 4 (2014) |
“Squirrel cage” flexibility in supports of aviation gas turbine engine rotors |
(Rus)
|
|
Degtiarev S.A., Leontiev M.K., Popov V.V.
|
| Vol 13, No 4 (2014) |
Regenerative air-water heat exchanger with improved heat exchange ability |
(Rus)
|
|
Dostovalova S.S., Serebryakov R.A., Batukhtin S.G., Batukhtin A.G.
|
| Vol 13, No 4 (2014) |
Check and prediction of gas-turbine engine’s technical state |
(Rus)
|
|
Zotin N.A.
|
| 1 - 100 of 266 Items |
1 2 3 > >>
|
