Search

Control metods of hardening process in the time of SPD

Volkov A.N., Sazonov M.B., Mashinnov K.Y.

(Rus)

Vol 17, No 3 (2018)

Residual stress optimization of technological processes with the aim of ensuring adhesion of nickel or chromium coatings on parts made of titanium alloys

Bukaty A.S.

(Rus)

Vol 14, No 4 (2015)

Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber

Kocherova Е.Е.

(Rus)

Vol 14, No 1 (2015)

Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance

Kostichev V.E.

(Rus)

The dependence of detail fatigue resistance on the thickness of hardening layer under outstripping superficial plastic deforming

Vakuljuk V.S.

(Rus)

Vol 11, No 1 (2012)

Influence of the direction of ultrasonic vibrations on the formation of residual stresses in thread pieces made of titanium alloys

Romashkina O.V., Karanaeva O.V.

(Rus)

Vol 13, No 1 (2014)

Forecasting the endurance limit of surface-hardened cylindrical parts made of steel 20 by the initial deformations of reference specimen

Sazanov V.P.

(Rus)

Vol 8, No 1 (2009)

Increasing the reliability of aircraft components by regulating technological residual stress

Kirpitchyov V.A., Vakulyuk V.S., Tchirkov A.V.

(Rus)

Residual stresses in the specimens with opennings imitating openings for coupling bolt into the turbine of jet engines

Vakuljuk V.S., Kirpichyev V.A., Pavlov V.F., Sazanov V.P.

(Rus)

Vol 17, No 2 (2018)

Evaluating the efficiency of hardening treatment of cylindrical parts made of structural steels

Sazanov V.P., Pavlov V.F., Semyonova O.Y., Prokhorov A.A.

(Rus)

Vol 14, No 4 (2015)

Estimation of residual stress influence on the low-cycle fatigue of threaded parts

Zlobin A.S.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Estimation of static strength of sections of the linear pipeline portion with a colony of corrosion fine cracks

Subbotin V.A., Scherbo I.V., Kholodkov S.A., Giorbelidze M.G.

(Rus)

Residual stresses distribution regularities in the smallest section of hardened hollow cylindrical detail with circular cut

Sazanov V.P., Larionova Y.S., Kolychev S.A.

(Rus)

Vol 11, No 1 (2012)

Method of producing thin-walled conical parts in a die with an elastic element

Popov I.P., Nesterenko E.S., Zimarev M.V.

(Rus)

Vol 13, No 1 (2014)

Method of calculating vibrations in a pipeline with damping supports made of MR material

Bezborodov S.A., Ulanov A.M.

(Rus)

Vol 7, No 1 (2008)

Impact of smooth part residual stress distribution on additional stresses in case of leading surface plastic deformation

Pavlov V.F., Kirpitchyov V.A., Deniskina Y.A., Semyonova O.Y.

(Rus)

Quality criteria hardened surface layer, the effective parameter management process technology of surface plastic deformation

Khibnidc T.A., Koltsoun Y.I.

(Rus)

Vol 17, No 1 (2018)

Relation between characyeristics of low-cycle and high-cycle fatigue of threaded parts and residual stresses

Zlobin A.S.

(Rus)

Calculation methods of investigating the surface layer of thin-walled shafts hardened by methods of surface plastic deformation

Bukaty A.S., Shvetsov A.N.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Increasing wear resistance of gas turbine engine blades on the basis of improving the process of thermoplastic hardening

Karpov A.V.

(Rus)

Study of residual strained state components distribution in the smallest section of superficial hardened part with a circular cut by finite-elements modeling method

Sazanov V.P.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Research of notch radius and depth influence on residual stresses distribution character in the smallest cross-section of surface hardened detail

Sazanov V.P., Larionova Y.S.

(Rus)

Vol 10, No 1 (2011)

Residual stresses and fatigue resistance of surface-hardened notched cylindrical specimens made of steel 20

Semyonova O.Y.

(Rus)

Vol 7, No 1 (2008)

Experimental investigations of thermal fields in inductor system under magnetic pulse forming

Barvinok V.A., Palamartchuk Y.Y., Kirilin A.N., Samokhvalov V.P., Vershigorov V.M.

(Rus)

Modeling of redistribution of residual stresses in the cylindrical specimens after advancing surface plastic forming

Chirkov A.V., Sazanov V.P., Samoylov V.A., Larionova Y.S.

(Rus)

Vol 17, No 1 (2018)

Residual stresses and fatigue resistance of toothed wheels

Vakulyuk V.S., Kovalkin Y.P., Sazanov V.P., Shadrin V.K.

(Rus)

Estimation of tension of the surface layer of parts after hardening by different methods of surface plastic deformation

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Assessing the influence of surface hardening on the endurance limit of specimens made of steel 40X using residual stresses of reference specimen

Sazanov V.P., Vakulyuk V.S., Shadrin V.K., Surgutanov N.A., Shlyapnikov P.A.

(Rus)

Coefficient of residual stresses influence on cylindrical parts endurance limit under bending estimation

Semyonova O.Y., Kirpichev V.A., Deniskina E.A.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Residual stresses and endurance strength in the specimens with V-shaped notches made of ВНС40 steel

Kirpichev V.A., Saushkin M.N., Sazanov V.P., Semyonova O.Y.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

Investigation of processing performance on finish turning of high strength steel 30HGSN2A

1 1., 1 1., 1 1.

(Rus)

Investigation of the influence of technological factors on the level of residual stresses in MPKM covering reverse D18T

Arlashkina O.J., Postnov V.I., Postnova M.V.

(Rus)

Vol 16, No 2 (2017)

New technologies of manufacturing non-rigid parts made of titanium alloys and stainless steels

Kiselev E.S., Blagovskiy O.V.

(Rus)

Experimental research of the surface layer quality and cutting forces in flat grinding of the BT6 titanium alloy

Fedorov D.G., Skuratov D.L.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Influence of tension and contact stress on sliding in cylindrical roller bearings in support of gas turbine engines

Belomytcev O.M., Pischalnikov A.B.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

Determination of accuracy of the form and arrangement of working cylindrical and conic surfaces when processing details with small rigidity

Dyomin F.I., Polyakova T.V.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Nitriding influence on residual stresses and endurance limit of specimens with notches made of 38Х2МЮА steel

Vakuljuk V.S., Chirkov A.V., Bukatyi A.S., Philippov A.A.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

The determination of the efficient parameters of surface strenghtening the thin-walled and the small-hard parts of gas turbine engines based on deformation tolerance

1 1., 1 1.

(Rus)

Vol 21, No 1 (2022)

The nature of change in the residual stress-strain state of dovetail lock joints, taking into account nonlinear strains

Zhernakov V.S., Mardimasova T.N., Koneva K.V.

(Rus)

Vol 10, No 3-2 (2011): Special Issue

About relaxational resistance of the compressor’s blades from titanium alloys

Smyslov A.M., Smyslova M.K., Dubin A.I.

(Rus)

Vol 16, No 1 (2017)

Influence of crack depth on the stress intensity coefficient in notched and smooth plates

Surgutanov N.A.

(Rus)