Email this article 
Analysis of contact interaction of polymer honeycomb core and CFRP base layers in sandwich-core constructions
- Authors: Pavlova S.A.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 20, No 1 (2021)
- Pages: 87-96
- Section: MECHANICAL ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/8650
- DOI: https://doi.org/10.18287/2541-7533-2021-20-1-87-96
- ID: 8650
Cite item
Full Text
Abstract
The article considers the challenge of studying the mechanical properties of composite sandwich constructions at the interface between the base layers and the lightweight core. The results of strength tests are presented for specimens of sandwich-core panels with coats made of high-strength carbon fiber-reinforced plastics (CFRP) and polymer honeycomb core considering various loading conditions. It is noted that a discrepancy in the values of shear stresses occurs in four-point bending and shear tests due to the complex stress-strain state of the specimens during bending. In order to interpret the experimental data, numerical analysis of the area of contact interaction between the coats and the filler of the sandwich-core composite structures is carried out. It is noted that in the presence of significant normal stresses in the adhesive coat the base layers separate from the core during shear tests and there is underestimation of the values of shear stresses by about 20%. Recommendations for the assignment of ultimate shear stresses for the use in practical design of sandwich-core composite constructions are put forward.
About the authors
S. A. Pavlova
Samara National Research University
Author for correspondence.
Email: pavlova-sva@yandex.ru
Engineer of the Research and Educational Center for Aircraft Construction
Russian FederationReferences
- Komarov V.A., Kutsevich K.E., Pavlova S.A., Tyumeneva T.Yu. Optimization of honeycomb sandwich floor panels made of polymer-matrix low-combustible composite materials based on high-strength carbon and glass fibers and adhesive binder. Vestnik of Samara University. Aerospace and Mechanical Engineering. 2020. V. 19, no. 3. P. 51-72. (In Russ.). doi: 10.18287/2541-7533-2020-19-3-51-72
- Shershak V.P., Shokin G.I., Egorov V.N. Technological characteristics of the fabrication of the aircraft floor sandwich honeycomb panels. Aviation Industry. 2014. No. 3. P. 34-42. (In Russ.)
- Barannikov A.A., Veshkin E.A., Postnov V.I., Strelnikov S.V. On the issue of production of the floor panels made of PСM for aircraft (review article). Izvestiya Samarskogo Nauchnogo Tsentra RAN. 2017. V. 19, no. 4 (2). P. 198-213. (In Russ.)
- Malysheva G.V., Grashchenkov D.V., Guzeva T.A. Evaluation of technological use efficiency of adhesives and glue prepregs in the manufacture of three-layer panels. Aviation Materials and Technologies. 2018. No. 4 (53). P. 26-30. (In Russ.). doi: 10.18577/2071-9140-2018-0-4-26-30
- Kutsevich K.E., Dementeva L.A., Lukina N.F. Properties and application of polymer composite materials based on glue prepregs. Trudy VIAM. 2016. No. 8 (44). P. 52-59. (In Russ.). doi: 10.18577/2307-6046-2016-0-8-7-7
- Shokin G.I., Shershak P.V., Andriunina M.A. Experience in development and manufacture of honeycomb floor panels made of domestic materials. Aviation Industry. 2017. No. 1. P. 32-39. (In Russ.)
- Lukina N.F., Petrova A.P., Muhametov R.R., Kogtyonkov A.S. New developments in the field of adhesive aviation materials. Aviation Materials and Technologies. 2017. No. S. P. 452-459. (In Russ.). doi: 10.18577/2071-9140-2017-0-S-452-459
- ASTM C297 / C297M-16. Standard test method for flatwise tensile strength of sandwich constructions. ASTM International, West Conshohocken, PA, 2016. doi: 10.1520/C0297_C0297M-16
- ASTM C365 / C365M-16. Standard test method for flatwise compressive properties of sandwich cores. ASTM International, West Conshohocken, PA, 2016. doi: 10.1520/C0365_C0365M-16
- ASTM C393 / C393M-20. Standard test method for core shear properties of sandwich constructions by beam flexure. ASTM International, West Conshohocken, PA, 2020. doi: 10.1520/C0393_C0393M-20
- ASTM C273 / C273M-20. Standard test method for shear properties of sandwich core materials. ASTM International, West Conshohocken, PA, 2020. doi: 10.1520/C0273_C0273M-20
Supplementary files
