Search

Issue
Title
Authors
Mathematical model for calculating pressure in a pulsating combustion chamber
Solodovnikov A.V., Odentsov D.A., Kravtsov E.V., Golubyatnik V.V., Shcheblykin D.A.
Improving the efficiency of aviation turbofan engines by using an intercooler and a recuperative heat exchanger
Omar H., Kuz'michev V.S., Tkachenko A.Y.
Use of probability distribution mixes in airport simulation model
Romanenko V.A.
Investigation of resonant oscillations working plates in experimental models of pneumatic valve
Zhuravliov О.A., Komarov S.Y., Makaryants G.M., Sergeev R.N., Harchikova J.V.
Modeling of heat conduction process in porous MR material
Zhizhkin A.M.
Development of methods for ensuring energy balance for the operation of mission equipment of “AIST”-series small satellites under conditions of power limitations
Ivanushkin M.A., Salmin V.V., Tkachenko S.I., Tkachenko I.S., Volgin S.S.
Peculiarities of using additional low-power energy sources in the power supply system of small spacecraft
Kargu D.L., Beznyakov A.M., Nemirov A.V., Radionov N.V., Chudnovsky Y.A.
Prospective lines of improving the process of evaluating the technical condition of aircraft hydraulic system working fluid
Koptev A.N., Gareyev A.M., Popelnyuk I.A.
Using apriori information in interferometric processing of high resolution sar data
Ushenkin V.A., Egoshkin N.A.
Method of accelerated test research soldered joints surface mount devices
Nasedkin A.V.
Simulation of wire manufacturing production cycle
Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.
Using an ionization probe removed from the sparking plug for the development of a two-zone ICE combustion model
Ivashin P.V., Rybakov M.P.
Functional chart of a multichannel hydrologic-optical-chemical measuring complex and new measuring channels of hydrophysical parameters
Smirnov G.V., Olenin A.L.
Dynamic of the a safety vent valve
Makaryjants M.V., Kudyurov L.V., Mustafaev Y.K., Tumanov D.V.
The influence of the shuttle effect on the intensification of heat losses in a Stirling engine
Savchenko V.A., Stolyarov S.P.
Optimization of model positional harakterstik of the electromagnetic sensor of the linear peremeshchny
Tingaev V.S., Matyunin S.A., Mednikov V.A.
Information support of aviation embedded information and control systems lifecycle
Akimova T.E.
Automated construction of a 3D plane model at the stage of technical proposals
Borgest N.M., Aleev R.H., Aksanian P.A., Gromov A.A.
Test of kinematic model by pneumatic manipulator
Gribkov A.M., Shilin D.V., Filin I.P.
Calculation methodology of intermittent burning chamber main parameters
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Mathematical modeling of heat exchange on air cooling of a number of aluminum ingots
Gorshenin A.S.
Optimization of aircraft seven stage compressor first stages parameters
Popov G.M., Matveev V.N., Baturin O.V., Kolmakova D.A.
Modeling static and dynamic characteristics of pressure reducing valves
Igolkin A.A.
Calculating the parameters of eddy current converters when testing several samples of cylindrical shape
Gainullina G.M., Polulekh A.V.
Methods of measurement and calculation of microaccelerations onboard of low orbit space microgravitational platform
1 1., 1 1., 1 1.
Plane high-speed particle transducer
Izyumov M.V., Syomkin N.D.
The simplification of heat engines thermodynamics calculation with using of idaeal gas’ model
1 1., 1 1.
Formation of a structural calculated mesh the passage blade of the axial turbine in program GAMBIT
Baturin N.V., Baturin O.V., Matveev V.N.
Simulation of automatic systems of controlling space vehicle drives
Zhuravlyova Y.V.
Methods and models of autonomous control over Earth remote sensing spacecraft survivability
Akhmetov R.N.
Verification of a complex of mathematical models of aerodynamics and dynamics of Savonius rotor motion
Sizov D.A., Onushkin Y.P., Krasnova O.A., Dzhanibekov O.T.
Simulation modeling as a method of assessing the resource intensity of space rocket complex support equipment operation
Shcherbina I.S.
Three-dimensional periodic thermoelastichydrodynamic modeling of hydrodynamic processes of a thrust bearing
Sokolov N.V., Khadiev M.B., Fedotov P.E., Fedotov E.M.
Acoustic diagnostics of local damages of spur wheels in multi-shaft drive using neural network models
Parfiyevich A.N., Dragan A.V., Sokol V.A.
Flexible geometrical model of pipeline
Gavrilov V.N.
Concept of construction of virtual lab for gas turbine engine testing
Rybakov V.N., Kuzmichev V.S., Tkachenko A.Y.
Aircraft engine design based on unified gas generator
Vinogradov A.S., Parovay Y.F., Mordvinov A.G., Popov D.V., Shirokov M.A.
Calculation of indicator diagram dynamic test at internalcombustion engine in KDAM environment
Kosenok B.B.
Оptimization of gas turbine aircraft engine control throughout the engine service life
Gurevich O.S., Golberg F.D., Smetanin S.A., Trifonov M.E.
Influence of turbulence models on calculated values of aircraft aerodynamic properties
Elisov N.A., Ishkov S.A., Shakhov V.G.
Frequency characteristics of a coaxial gas damper for booster feed line
Odinokov D.A., Gimadiyev A.G.
Method of lossless image compression in the Earth remote sensing systems
Petrov E.P., Kharina N.L., Sukhikh P.N.
Quality forecasting solder joint electronic components
Shumskikh I.Y.
Method of creating digital terrain models and its practical application as exemplified by Samara region
Anshakov G.P., Myatov G.N., Malinovskii V.A.
Problems of design analysis of characteristics of a gas turbine engine working on natural gas
Gulina S.A., Orlov M.Y., Mikheyenkov E.L.
ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing
Nuzhnov Y.V.
Computer-aided system of virtual gas turbine engine testing
Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Ostapuk Y.A., Filinov E.P.
CFD-modeling of processes in a high-pressure oxidizer pump for the turbopump assembly of a liquid rocket engine
Zubanov V.M., Shabliy L.S.
Real-time control algorithms requirements verification mathematical model implementation in visual design computer-aided system
Shulyndin A.V., Tjugashev A.A.
Comparison of mathematical simulation results and experimental research of PVD-K3-1 air pressure probe
Moiseev V.N., Dubinina M.M., Pavlovsky A.A., Sorokin M.Y.
Experimental research of vibrations of pipeline of GTD with support from MR for working off method of calculation in environment of ANSYS
Shvetsov A.V., Lezhin D.P., Ulanov A.M.
The parameters of turbulence models and grids investigation on CFD results of plane turbine cascade
Zubanov V.M., Krivcov A.V., Shtraub A.A.
Linear mathematical model for the determination of rational treatment conditions on the diamond smoothing operations in the manufacture of aircraft parts
Skuratov D.L., Shvetsov A.N., Abulkhanov S.R.
Classification of models of basic links in the air transport sector in the context of the process of macrologistic system formation and development
Pakhomov A.A.
Reduction of circumferential variation in the final stage of IPC
Baturin O.V., Krivcov A.V., Matveev V.N., Popov G.M.
Method of reducing design aerodynamic characteristics to the results of drain tests of a transport category aircraft model
Bondar Y.I.
Theoretical and experimental analysis of the thermal state of transport aircraft compartments thermal state
Nikolayev V.N.
Mathematical model of an eddy current converter for testing discontinuous structure samples
1 1., 1 1.
Extrapolation of conditions of an information measuring and control system with the iterative algorithm of operation
Zelensky V.A.
Simulation of the distributed selection and supply of cooling air in gas-turb engine
Goryunov A.I., Goryunov I.M.
Development of the finite element model of vibroacoustical characteristics of pipe system
Mironova T.B., Prokofiev A.B., Shahmatov E.V.
3D model didactic properties investigations for geometrical modeling principles training
Ivashchenko V.I.
Non-linear image filtration based on Markovian networks with several states
Petrov Y.P., Kharina N.L., Rzhanikova Y.D.
Mathematical model for calculating the mass of a heat exchanger in problems of optimizing the parameters of the working process of aircraft gas turbine engines
Kuz'michev V.S., Omar H., Tkachenko A.Y., Bobrik A.A.
Dataware of virtual lab for gas turbine engine testing
Rybakov V.N., Kuzmichev V.S., Kulagin V.V., Krupenich I.N., Fedorov D.V.
Dynamik experimental researches of the face gas dynamic seal
Novikov D.K., Balyakin V.B., Sedov V.V.
Testing of combined air-rocket engine mak-up with pulsing combustion chamber
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Schemes, parameters, work process, characteristics and structure of long-range interception aircraft engines
Kovalev A.V., Sanin V.N., Krivenok A.G., Korolenko V.V.
Constructing 3D fan blade models in CAD-system on the basis of coordinate measuring techniques
Arkhipov A.N., Ravikovich Y.A., Fedorov I.M., Kholobtsev D.P.
Optimization of parameters of a hub aircraft ground handling system on the basis of a fuzzy-controller simulation model
Vasileva I.A., Romanenko V.A., Khvostova T.V.
Study of uncertainty of measuring geometrical parameters of gas turbine engine compressor blade profiles
Pechenin V.A., Bolotov M.V., Ruzanov N.V., Yanyukina M.V.
Mathematical modeling of technological production process of thermo-stable resistor – capacity structures
Merkulov A.I., Laktanov P.V., Merkulov V.A.
Formation of a model of rheological properties of hard-to-machine materials in the process of intensive cutting force deflection
Khaimovich A.I., Balaykin A.V., Galkina N.V.
Designing a model of mortgage lending for objects of spareholding housing construction
Korosteleva T.S.
Assessing reduction gear mass in the problem of optimizing parameters of the working process of a turboprop engine at the initial design stage
Grigoryev V.A., Zagrebelnyi A.O., Prokaev A.S., Kuznetsov S.P.
Volume and mass mathematical models of single-stage centripetal ultralow power turbines
Grigoriev V.A., Kalabukhov D.S., Rad'ko V.M.
Development of discrete pneumatic pressure regulator and researching of its characteristics
Greshniakov P.I., Sinyakov A.F., Ilukhin V.N.
Method of compression of digital halftone images on the basis of markov chains with several states
Petrov E.P., Harina N.L., Rzhanikova E.D.
A hot-wire anemometric transducer of airflow mass rate
Nikolayev V.N.
Optimization of strength characteristics of lighting devices aircraft by construction of virtual models
Abulkhanov S.R., Goryainov D.S., Skuratov D.L.
Coordination of process management mechanisms for design and technological planning of production at the level of staff members
Kirichenko A.S., Khaimovich I.N.
Heat exchange parameters of units and pipelines of the aircraft hydraulic system
Nikolayev V.N.
Rail line models for adaptive receiver track circuits
1 1.
Methodology of the adaptive graphic and geometric training for the computer aided design teaching
1 1.
Modeling of heat conduction process in porous MR material
1 1.
Increase of stability of technological systems at processing of details aircrafts engines
Skuratov D.L., Burmistrov E.V., Samykin V.N.
A model of motion of monodispersible gas-liquid stream is in transzvukovoy of part of rocket chamber
Еpishchenko S.V., Pervishin A.N.
Dissipative structures of the Gierer-Meinhardt model of morphogenesis in the stochastic field
Kurushina S.E.
Influence of the reliability of Earth remote sensing spacecraft onboard systems on the monitoring of imaging periodicity
Kirilin A.N., Akhmetov R.N., Kurenkov V.I., Kapitonov V.A., Stratilatov N.R., Lokhmatkin V.V.
Digital design of heat-resistant dimensionally stable carbon laminate (CFRP) structures
Komarov V.A., Kishov E.A., Laikova O.G., Pavlov A.A.
Method of calculating dynamic designs of space launch vehicles for designing systems of stabilization of their motion
Lobanov V.A.
Theoretical and experimental investigation of the photographic reconnaissance plane instrument bay thermal state
Nikolayev V.N.
Investigatiom of interrelation of gluing designs defects from polymeric composite materials
Mordasov V.I., Storozh A.D., Grebnev N.E., Grebnev D.N., Shulepova O.V.
Experimental and theoretical research of continuous motion of rotor on anisotropic gapped elastic support
Nikiforov A.N., Panovko G.Y., Shokhin A.Y.
Use of phase portraits of hydro-mechanical units for diagnosing aircraft hydraulic systems
Gareyev A.M., Popelnyuk I.A.
Mathematical model of surface layer formation during hydroabrasive jet machining
Meshcheryakov A.V., Shulepov A.P.
Uniform access to universal data storage
Yablokov D.E.
Mathematical modeling of interaction a high-frequency torch discharge with construction elements of radio equipment
Kostin A.V., Piganov M.N., Stolbikov A.V.
Procedure of validated CFD-modeling of a two-stage screw-centrifugal pump
Zubanov V.M., Shabliy L.S., Krivtsov A.V., Ivanov A.I., Kositsin I.P., Baturin N.V.
Optimization model of financing production of an industrial enterprise of space-rocket industry
Inozemtsev V.V.
101 - 200 of 277 Items << < 1 2 3 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies