Search

Issue
Title
Authors
Investigation of surface morphology, optical and electronic properties of Mg2Si thin films on Si(111)
Fomin D.V., Polyakov A.V., Galkin K.N., Galkin N.G.
Ballistic analysis of a mission to Jupiter’s moon Callisto with landing on the surface
Kovalev V.V., Marchenko A.D., Starostina T.V., Sharipova A.R.
The determination of the efficient parameters of surface strenghtening the thin-walled and the small-hard parts of gas turbine engines based on deformation tolerance
1 1., 1 1.
Influence of surface roughness on the heat transfer coefficient of fluids in an additively manufactured supercharger
Smekalkin A.S., Ivanov A.V.
Model for evaluating the end runouts of a rotor with parallel connections of parts
Grachev I.A., Kudashov E.V., Bolotov M.A., Pronichev N.D.
Analysis of methods for rapid assessment of surface cleanliness
Ivliev N.A., Kolpakov V.A., Krichevsky S.V.
Technology of pulsed laser surface coating in pressing tool repair
Smelov V.G., Sotov A.V., Kyarimov R.R., Agapovichev A.V.
Device for the assessment of surface condition by friction gaging
Kolpakov V.A., Kolpakov A.I., Ivliev N.A., Krichevsky S.V.
Experimental research of the surface layer quality and cutting forces in flat grinding of the BT6 titanium alloy
Fedorov D.G., Skuratov D.L.
Assessment of the endurance limit of light structural metal components using the fatigue surface development method
Zalyaev R.A., Kirpichev V.A.
Definition of the apparent elastic limit's change in metal materials at nanoporous structures formation
Murzin S.P., Tregub V.I., Osetrov E.L.
New technologies of manufacturing non-rigid parts made of titanium alloys and stainless steels
Kiselev E.S., Blagovskiy O.V.
Mathematical model of anisotropic elastic-plastic material
Grechnikov F.V., Yerisov Y.A.
Assessing the influence of surface hardening on the endurance limit of specimens made of steel 40X using residual stresses of reference specimen
Sazanov V.P., Vakulyuk V.S., Shadrin V.K., Surgutanov N.A., Shlyapnikov P.A.
Dynamics of spacecraft landing in the area of its contact with the surface
Voronin V.V.
Methods of increase of wear resistance and vibroakusticheskikh of parameters of knots of the friction of space equipment
Gromakovsky D.G., Kovshov A.G., Kotcherov E.P., Makaryants M.V.
Requirements to quality superficial lauer of details GTE
Petukhov A.N.
The detecting improvement by laser surface sounding
1 1.
Research of growth rate of fatigue cracks in aluminum AK6 alloy depending on tension characteristics in the field of their progress
Aistov I.P., Vansovich K.A., Kruchkov A.N.
Investigation of laser beam influence on aircrafts surface condition estimation efficiency
Sazonnikova N.A.
Assessment of gas turbine engine airfoil surface microstructure
Nosov N.V., Abramov A.D., Kosulin S.I.
Experimental investigation of the efficiency of laserelectronic systems for aircraft surface remote sounding
Sazonnikova N.A.
Forecasting an increment in the parts’ endurance limit due to surface hardening
Pavlov V.F., Filatov A.P., Semyonova O.Y., Sazanov V.V., Mikushev N.N.
Technological processes simulation incomplex parts production of aerospacetechnical equipment: problems and the ways of their solving
Bolotov M.A., Zhidyaev A.N., Surkov O.S.
Problems fatigue (HCF) of constructional materials and detals GTE
Petukhov A.N.
Forecasting the endurance limit of surface-hardened cylindrical parts made of steel 20 by the initial deformations of reference specimen
Sazanov V.P.
Improvement of the quality of the surfaces of monowheel blades of liquid rocket engine turbopump assemblies
Mozgov S.A., Panov D.V., Saushkin B.P.
Quality criteria hardened surface layer, the effective parameter management process technology of surface plastic deformation
Khibnidc T.A., Koltsoun Y.I.
Selection of reference specimens for assessing the efficiency of part surface nitriding
Sazanov V.V.
Method of accelerated test research soldered joints surface mount devices
Nasedkin A.V.
Combined treatment technology for slot channels of cooling systems
Rodionov A.O., Suhochev G.A., Kodentsev S.N., Smolyannikova E.G.
Processing spekl images using pseudo-interferograms
Shcheglov Y.D.
Influence of the direction of ultrasonic vibrations on the formation of residual stresses in thread pieces made of titanium alloys
Romashkina O.V., Karanaeva O.V.
Application of the shape memory effect in an aerodynamic surface deployment unit of guided missile
Dyupin A.P., Pushin V.G.
Modeling stable growth of fatigue cracks in aero engine turbine discs under simple and complex loading cycles
Tumanov N.V., Lavrentyeva M.A., Cherkasova S.A., Servetnik A.N.
Analysis of landing process dynamics for different reentry vehicle landing device support schemes
Borzykh S.V., Voronin V.V., Shchiblev Y.N.
Modeling of redistribution of residual stresses in the cylindrical specimens after advancing surface plastic forming
Chirkov A.V., Sazanov V.P., Samoylov V.A., Larionova Y.S.
Mathematical model of surface layer formation during hydroabrasive jet machining
Meshcheryakov A.V., Shulepov A.P.
Investigation of preliminary surface rolling influence on the fatigue resistance of threaded specimens
Sazanov V.P.
Modification of the surface of silicon carbide parts by laser treatment for improving their tribological properties
Murzin S.P., Balyakin V.B., Zhuravel L.V.
Laser measurement systems effectivity improvement for aircrafts and engines surface estimation
Sazonnikova N.A.
Fatigue strength prediction of surface - hardened cylindrical specimens of different diameters
Kirpichev V.A., Pavlov V.F., Chirkov A.V., Ivanova A.V.
Residual stresses and fatigue resistance of surface-hardened notched cylindrical specimens made of steel 20
Semyonova O.Y.
Forecasting the endurance limit of shot-strengthened parts with a concentrator by residual stresses of a control specimen
Kirpitchyov V.A., Vakulyuk V.S.
Research of the influence of electron beam welding of titanium alloys on hydrogen distribution in the weld
Muravyev V.I., Bakhmatov P.V., Grigorev V.V., Shakirova O.G., Iskhakov S.A.
About relaxational resistance of the compressor’s blades from titanium alloys
Smyslov A.M., Smyslova M.K., Dubin A.I.
Mathematical description of the interaction between a probing microwave signal and the helicopter main rotor blade
Danilin A.I., Zhukov S.V., Popov M.S.
Comparative research of algorithms of measuring the geometry of complex profiles of gas turbine engine compressor blades
Pechenin V.A., Bolotov M.A., Ruzanov N.V., Stepanova E.R.
Dependence of the endurance limit on the character of residual stresses distribution in the surface layer of hardened parts
Kirpichyov V.A., Vakulyuk V.S., Bukaty A.S., Lunin V.V., Mikhalkina S.A.
EDM laser alloying and texturing the sliding surface mechanical seals
Antoshevskiy B., Tarelnik V.B., Martsinkovskiy V.S.
Analysis of stress distribution in the dangerous section area of specimens with fillets under bending using the finite-element modeling method
Vakuljuk V.S.
Impact of smooth part residual stress distribution on additional stresses in case of leading surface plastic deformation
Pavlov V.F., Kirpitchyov V.A., Deniskina Y.A., Semyonova O.Y.
Mathematical model for calculating the mass of a heat exchanger in problems of optimizing the parameters of the working process of aircraft gas turbine engines
Kuz'michev V.S., Omar H., Tkachenko A.Y., Bobrik A.A.
Experiment-calculated research of the influence of the shot-peening strengthening upon the low-cycle fatigue of the gas turbine parts with the stress concentrator
Porter A.M., Bukaty S.A., Leshin D.P., Bukaty A.S.
Analysis of the features of Earth surface clutter formation in the case of low-flying target detection with the use of a bistatic radar
Vorontsova S.A.
Research of the influence of the diamond burnishing process parameters on the surface roughness of a steel 15CR12NI2MOVWANB-S workpiece when using an indenter made of natural diamond
Shvetsov A.N., Skuratov D.L.
Anode dissolution of a nickel-chromium alloy ЖС6У in various electrolytes
Sayapova V.V., Amirchanova N.A., Ustyuzhanina S.V., Gordeyev V.Y.
Dynamic method of investigating stress concentrators of the YMZ-238 engine crankshaft considering surface hardening plastic deformation
Bukaty A.S., Kostichev V.E., Deniskina E.A.
Analysis of the structure of the third variation of roll moment coefficient during hypersonic flow about bodies of revolution with small spatial surface variations on the basis of differential locality hypothesis method
Danilkin V.A., Kostin G.F., Mokin Y.A., Tikhonov N.N.
Modeling non-through surface cracks in the thin-walled structures
Skvortsov Y.V., Glushkov S.V.
Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades
Sazonov M.B., Solovatskaya L.V.
Study of uncertainty of measuring geometrical parameters of gas turbine engine compressor blade profiles
Pechenin V.A., Bolotov M.V., Ruzanov N.V., Yanyukina M.V.
Thin coating for printed circuit boards in industrial production technology of modern equipment
Erendeev J.P.
Increase treatment high strength steels 30HGSN2FA based on a minimum of energy consumption
Trusov V.N., Zakonov O.I., Shikin V.V.
Gas-discharge generation of near-wall flows
Ivchenko A.V., Zhuravliov O.A., Shakhov V.G.
Investigation of processing performance on finish turning of high strength steel 30HGSN2A
1 1., 1 1., 1 1.
Analysis of the results of fatigue tests of cylindrical specimens with fillets using the method of finite element modeling
Vakulyuk V.S.
Influence of notch radius at advancing surface plastic deforming on endurance limit of detail
Vakuljuk V.S., Kirpichyev V.A., Pavlov V.F., Chirkov A.V.
Evaluating the efficiency of hardening treatment of cylindrical parts made of structural steels
Sazanov V.P., Pavlov V.F., Semyonova O.Y., Prokhorov A.A.
Mathematical model of fuel sloshing in the measuring channel of the fuel expenditure control system
Kryukov Y.A.
Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance
Kostichev V.E.
Influence of the strengthening-finishing treatment on structure-energy state of surface layer and fatigue resistance
Sazonov M.B., Volkov A.N., Schigrinyev I.A.
Research of influence of methods SPD on stpucture surface layer and resistance of fatigue
Volkov A.N., Sazonov M.B., Schigrinyev I.A.
Trouble error parameters determination microrelief optoelectronic means on the basis of correlation algorithm
Abramov A.D., Bukanov F.F.
Mathematical modelling and parametric research of flow of the twisted turbulent single-component stream of the propulsive mass in the trance- and supersonic areas of Laval nozzles
1 1., 1 1.
Analysis of schemes and methods of hydrodynamic cleaning of hydro-fuel system units
Sanchugov V.I., Reshetov V.M.
1 - 76 of 76 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies