Search

Issue
Title
Authors
Increasing the efficiency and stability of fuel supply to the combustion chamber of a liquid rocket engine by spray nozzles
Ageenko Y.I., Bubnova A.S.
Creation of promising technologies for producing holes in parts of a high-frequency ion engine
Ryazantsev A.Y., Yukhnevich S.S., Shirokozhuhova A.A.
Method of first-approximation calculation of take-off weight of a light aircraft with a hybrid propulsion system
Sychev A.V., Arbuzov I.V., Ravikovich Y.A.
Results of conjugate modeling and analysis of the thermal state of a high-pressure turbine blade
Matveev V.N., Melnikov S.A., Popov G.M., Zubanov V.M., Kudryashov I.A., Shcherban A.I.
Comparative evaluation of the effectiveness of the application of perspective types of electric propulsion thrusters in the small spacecraft
Kulkov V.M., Obukhov V.A., Yegorov Y.G., Belik A.A., Krainov A.M.
Analysis of basic concepts of advanced engines for supersonic civil aircraft on the basis of foreign designers’ experience
Alendar A.D., Grunin A.N., Siluyanova M.V.
Experimental method for evaluating the balance of high-speed small-sized internal combustion engines
Rekadze P.D., Sychugov S.Y., Melentiev V.S., Rodionov L.V.
Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process
Matveev V.N., Goriachkin E.S., Popov G.M., Baturin O.V., Kudryashov I.A.
Study of the efficiency of the application of gas dynamic stabilization of the flame in a current engine
Belonozhkin V.V., Teslya D.N.
Comparative results of computational and theoretical study of the annular nozzle with a flat central body
Kirshina A.A., Levikhin A.A., Kirshin A.Y.
New methods for identifying diagnostic indicators of the technical condition of aircraft gas turbine engine reduction gearboxes
Sundukov A.Y., Shakhmatov Y.V.
Design procedure of fundamental parameters of the direct-flow detonation pulsing engine
Porshnev V.A.
Development of a methodology for calculating the working process of a small-size two-stroke internal combustion engine
Biryuk V.V., Gorshkalev A.A., Zakharov M.O., Larin V.L.
Evaluation of the possibility of using combustion promoters in hydrocarbon fuels for perspective jet engines
Petrukhin N.V., Sergeev S.M., Prokopenko O.A., Grek M.O.
Investigation of the influence of broadband mechanical disturbances on the quality of recording interference patterns of GTE-wheel oscillations using a digital speckle pattern interferometer
Ivchenko A.V., Safin A.I.
Series of diagnostic indicators of gearbox teeth wear in aircraft gas turbine engines
Sundukov A.Y., Shakhmatov Y.V.
Influence of pad geometry and method of oil supply on the thermal state of GTE rotor tilting-pad journal bearing
Parovay E.F.
Research of influence of the thermal stream from the mid-flight liquid rocket engine on parameters of operating liquid rocket engines of small draught in the conditions of perspective razgonnogo's propulsion system of the block
Ageenko Y.I., Galperin R.N., Ivashin Y.S., Nigodjuk V.E., Ryzhkov V.V., Sulinov A.V.
Mathematical model of small-thrust rocket engine with gaseous oxygen and hydrogen in pulse operation
1 1.
Verification of aero-engine numerical rotor models based on virtual static structural and modal tests
Shaposhnikov K.V., Degtyarev S.A., Leontiev M.K., Anisimov S.V.
Methodology for thermal calculation of the heat exchanger for cooling the air at the intake of the aerospace plane engine compressor
Panchenko S.L., Gras’ko T.V.
Standardization of diagnostic indicators of gearbox teeth wear in aircraft gas-turbine engines
Sunduckov A.Y., Shakhmatov Y.V.
JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines
Vinogradov K.A., Nikulin A.S., Shmotin Y.N.
Calculation of optimum transfers from high-elliptic orbits to geostationary orbits using a stationary plasma engine
Kvetkin A.A., Kolesov A.V.
Assessing the efficiency of flights to high near-earth orbits using boosters with chemical and electro-rocket engines
Ishkov S.A., Fadeenkov P.V., Balakin V.L.
Modelling width of the spectral component of a gas-turbine engine gearbox output shaft speed
Sundukov A.E., Shakhmatov E.V.
Analysis of low-thrust liquid rocket engines with a methane air pump unit
Ivanov A.I., Kositsin I.P., Borisov V.A.
Aircraft electric power plants
Kondryakov A.D., Leontiev M.K.
Gas-dynamic losses in the flow part of the channel charge of a solid-propellant rocket engine
A. N. Sabirzyanov A.N., Khamatnurova C.B., Kuzmin V.V.
Application of the vacuum casting technology in the production of small-size gas turbine engine blade machines
Faramazyan A.M., Remchukov S.S., Demidyuk I.V.
Investigation of the characteristics of the component of vibration of gas turbine engine gearbox that causes fatigue failures of its structural elements in case of tooth flank wear
Sundukov A.E.
Life of gas turbine engine components under corrosive exposure
Pivovarova M.V., Gladkiy I.L.
Working process of gaseous fuel metallizator
Pervyshin A.N., Ryazanov A.I.
To a question of forcing up of thermal stirlings macine
Belozertcev V.N.
Calculation of lubricant flow in the slide bearing of the aviation engine reducer
Siluyanova M.V., Fertikov A.О.
Impact of the turbulence modeling approach on the accuracy of the fan noise level prediction
Pyatunin K.R., Arkharova N.V.
Estimating the efficiency of a bypass turbojet engine on the basis of a serial gas generator as a part of the power plant of a high-altitude unmanned aerial vehicle
Zinenkov Y.V., Lukovnikov A.V., Popov A.V., Nechaev V.N.
Development of a new collector device for gas turbine engine afterburner
Teslya D.N., Mayatsky S.A., Grasko T.V.
Improvement of gas turbine engines due to isothermal expansion in the turbine
Muraeva M.A., Gorjunov I.M.
Using the «virtual engine» software in automatic control system of gas turbine engine
Golberg F.D., Gurevich O.S., Petukhov A.A.
Conversion of gas turbine engine oil system
Boev A.A., Grishanov O.A.
Identifying the causes of excessive vibration in gas turbine engines in the course of their rig tests
Sundukov A.Y., Sundukov Y.V., Plotnikov S.M.
Iodine as an alternative propellant for electrojet engines
Ostrovskiy V.G., Smolentsev A.A., Scherbina P.A.
Numerical simulation of tonal noise of a bypass engine fan stage
Pyatunin K.R., Arharova N.V., Remizov A.E.
Design of the gas turbine engine rotor wheel with ceramic blades
Sapronov D.V., Reznik S.V.
Thermoplastic strengsening of blades aircraft gas turbine engines
Krotinov N.B.
Fulfilment of initial design level of gas turbine engine using the methods of «ASTRA» CAE system
Kuzmichev V.S., Krupenich I.N., Tkachenko A.Y.
Development liquid roket engine on component fuel liquefied natural gas and oxygen for reusable space launching systems
Efimochkin A.F., Khrisanfov S.P., Golubyatnik V.V., Kafarena P.V., Yeliseyev A.V.
Determining the angle of advance of ignition when switching from petrol to gas depending on fuel mixture burning rate
Shishkov V.A.
Methods and means of aircraft gas turbine engine conceptual design underlying the CAE system «ASTRA»
Kuzmichev V.S., Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Kulagin V.V.
Operational testing of thermoplastic reinforced blades
Krutsilo V.G., Krotinov N.B.
Guaranteeing of ecological and economic indicators of internal combustion engine
Grabovskiy A.A., Mironov V.A.
Optimal program of controlling continuous low thrust in the flight between noncoplanar elliptical and geostationary orbits
Fadeenkov P.V., Ishkov S.A.
A separator skidding in the cylindrical roller bearing between shafts of the gas turbine engine
1 1., 1 1., 1 1.
Development and study of the designs of sprayers with increased speed for internal combustion engine (ice)
, ,
Increasing efficiency of pressurization of the rocket tanks in the flight
1 1., 1 1.
Seal designing in a structure of the cooling system in gas turbine engine
Vinogradov A.S., Myatlev A.S.
Optimal control of the angle of attack of a hypersonic flight vehicle
Bebyakov A.A.
The usage of high power supply capacity transport spacecraft
Ivanovich S.N.
Development of improved performance electromagnetic valve for liquid rocket engine
Igolkin A.A., Chubenko T.A., Maksimov A.D.
Mathematical model for calculating the mass of a heat exchanger in problems of optimizing the parameters of the working process of aircraft gas turbine engines
Kuz'michev V.S., Omar H., Tkachenko A.Y., Bobrik A.A.
Test bench for investigation of thrusters intra-chamber working processes
Pervyshin A.N., Ryazanov A.I.
Physical workflow model in the combustion chamber LREST with a jet-centrifugal jets on hypergolic propellants
Silyutin M.V., Shustov S.A.
Calculation of indicator diagram dynamic test at internalcombustion engine in KDAM environment
Kosenok B.B.
Technology of computational analysis of the working process parameters of low-thrust rocket engines running on gaseous oxygen-hydrogen fuel with the use of ANSYS CFD
Ryzhkov V.V., Morozov I.I.
Optimization of fuel distribution in the afterburner of a gas turbine engine
Nelyubin V.R.
Analysis of schemes of correction of dynamic characteristics of acoustic probes for measuring pressure pulsations in a gas turbine engine
Gimadiev A.G., Bystrov N.D., Dyagileva E.S.
Locally optimal control of space tug motion between the libration points of the Earth-Moon system
Starinova O.L., Fain M.K.
Application of structure-energy failure theory for determining the probability of failure and durability of turbine and compressor blades of aircraft engines
Chernyaev A.I., Trefilov V.A.
The influence of booster design features on aicraft engine fan tonal noise
Khaletskiy Y.D., Korzhnev V.N., Pochkin Y.S.
Application of numerical simulation systems for the research of the blade casting process in blank production
Smelov V.G., Vdovin R.A., Agapovichev A.V.
Strength analysis of internal combustion engine elements by using ANSYS with taking into account heat processes in the combustion chamber
Biryuk V.V., Gorshkalev A.A., Kayukov S.S., Saigakov E.A.
Modeling of intrachamber processes in an oxygen-hydrogen thruster
Vaulin S.D., Salich V.L.
Verification of energy efficiency of a low-thrust liquid-propellant engine with the deflector-centrifugal injecting pattern
Ageenko Y.I., Pegin I.V.
The influence of the shuttle effect on the intensification of heat losses in a Stirling engine
Savchenko V.A., Stolyarov S.P.
Seal designing as element of aircraft engine systems and engine units
Vinogradov A.S.
Development of a virtual prototype of gasturbine engine at the stage of conceptual thermogasdynamic designusing the CAE-system «ASTRA»
Tkachenko A.Y., Krupenich I.N.
Joint works of Ilyushin design bureau and general designer N. D. Kuznetsov
Novozhilov G.V.
The projecting of gas turbine engine composite blades
Ryzhov A.A., Galimkhanov B.K., Ryzhov N.A., Latypov R.K., Irgalin S.R.
Development of a small-sized acoustic probe for the measurement of pressure pulsations in the gasdynamic duct of gas turbine engines
Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A.
Parametric analysis of thermoacoustic travelling-wave engine operation with external heat application
Dovgyallo A.I., Zynovyev Y.A., Vorotnikov G.V.
Experimental determination of the side forces acting on the combustion chamber in the altitude chamber at startup
, , , ,
Application’s ways of gas–turbine power plants of NK-family for upgrading of heat electric generation plant
1 1., 1 1., 1 1., 1 1.
Operate reliability enhancement of thermogenerator modules for heat engine with acoustic emission method
1 1.
Project of 30 000 h.p. power gas turbine
Zrelov V.A.
Flame propagation velocity and ionization in burning gasoline and methane with addition of hydrogen
Shaykin A.P., Ivashin P.V., Galiev I.R.
Introduction to the problem of calculating the parameters of the mixing chamber of an afterburning bypass engine
Karev O.D.
Improving the efficiency of aviation turbofan engines by using an intercooler and a recuperative heat exchanger
Omar H., Kuz'michev V.S., Tkachenko A.Y.
Gas dynamic calculation of detonation in constant-cross-section ducts
Grigoriev A.V., Rudakov O.A., Solovieva A.V.
Aspects of the numerical method calculating thermogazodynamic lrest based on not perfect passing of workflows in the combustion chamber
Silyutin M.V., Shustov S.A.
Method of design calculation jet-centrifugal gas-liquid duplex fuel nozzle with internal mixing
Egorychev V.S.
Testing of combined air-rocket engine mak-up with pulsing combustion chamber
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Proposals for improving the efficiency and service life of the turbines of turbo-pump assemblies in liquid-propellant rocket engines by using double-sided crest-type radial labyrinth seals
Levochkin P.S., Chvanov V.K., Vasiliev V.S., Timushev S.F.
Evaluation of turbine rotor blade life taking into account static and thermal cyclic loading
Badamshin I.K.
Selecting a squeeze film damper model for solving problems of gas turbine engine rotor dynamics
Leontiev M.K., Kutakov M.N.
Unstady heat-mass-transfer and fuel distributions in flows downstream the gas-dynamic flame holder
Tretyakov V.V., Sviridenkov A.A.
Empirical metod of predicting aviation piston engine noise
Moshkov P.A.
Research of hydrodynamic processes in the lubrication system of gas turbine engines
Gulienko A.I., Shchurovskiy Y.M.
Possibility of using a bi-directional impulse turbine in a thermo-acoustic engine
Dovgjallo A.I., Shimanov A.A.
1 - 100 of 268 Items 1 2 3 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies