Search

Issue
Title
Authors
The problems of creating a propulsion system of a new generation supersonic passenger aircraft (review)
Alendar A.D., Lanshin A.I., Evstigneev A.A., Yakubovsky K.Y., Siluyanova M.V.
Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process
Matveev V.N., Goriachkin E.S., Popov G.M., Baturin O.V., Kudryashov I.A.
Creation of promising technologies for producing holes in parts of a high-frequency ion engine
Ryazantsev A.Y., Yukhnevich S.S., Shirokozhuhova A.A.
Increasing the efficiency and stability of fuel supply to the combustion chamber of a liquid rocket engine by spray nozzles
Ageenko Y.I., Bubnova A.S.
Efficiency of technical workings out in batch production GTE
Aleksentsev E.I., Shitarev I.L., Kurbatov V.P., Gritsenko E.A.
Features of start-up the engine of internal combustion with spark ignition on gas fuel
Shishkov V.A.
Оptimization of gas turbine aircraft engine control throughout the engine service life
Gurevich O.S., Golberg F.D., Smetanin S.A., Trifonov M.E.
Increasing the overall performance of a two-stroke engine with spark ignition by fuel injection
Dovgyallo A.I., Krasheninnikov S.V., Shchepetov D.A.
Experimental method for evaluating the balance of high-speed small-sized internal combustion engines
Rekadze P.D., Sychugov S.Y., Melentiev V.S., Rodionov L.V.
Study of the efficiency of the application of gas dynamic stabilization of the flame in a current engine
Belonozhkin V.V., Teslya D.N.
Analysis of basic concepts of advanced engines for supersonic civil aircraft on the basis of foreign designers’ experience
Alendar A.D., Grunin A.N., Siluyanova M.V.
Peculiarities of starting a spark-ignition gas fuel internal combustion engine
Shishkov V.A.
Results of conjugate modeling and analysis of the thermal state of a high-pressure turbine blade
Matveev V.N., Melnikov S.A., Popov G.M., Zubanov V.M., Kudryashov I.A., Shcherban A.I.
Research of influence of the thermal stream from the mid-flight liquid rocket engine on parameters of operating liquid rocket engines of small draught in the conditions of perspective razgonnogo's propulsion system of the block
Ageenko Y.I., Galperin R.N., Ivashin Y.S., Nigodjuk V.E., Ryzhkov V.V., Sulinov A.V.
The relevance of introducing a requirements management system in the production process of the aircraft engine construction industry
Malinovskiy I.M., Starodumov A.V., Myagkov K.A., Yusipov B.K.
Optimization of trajectory motion of the first stage of an aerospace system
Khramov A.A.
The task of creating the bypass engines of various thrust levels using the given gas generator
Kocherov E.P., Kuzmichev V.S., Kulagin V.V., Fedorchenko D.G.
Modelling width of the spectral component of a gas-turbine engine gearbox output shaft speed
Sundukov A.E., Shakhmatov E.V.
JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines
Vinogradov K.A., Nikulin A.S., Shmotin Y.N.
Series of diagnostic indicators of gearbox teeth wear in aircraft gas turbine engines
Sundukov A.Y., Shakhmatov Y.V.
Influence of pad geometry and method of oil supply on the thermal state of GTE rotor tilting-pad journal bearing
Parovay E.F.
Development of a methodology for calculating the working process of a small-size two-stroke internal combustion engine
Biryuk V.V., Gorshkalev A.A., Zakharov M.O., Larin V.L.
Results of experimental studies of parameters of low-thrust rocket engines operating on gaseous oxygen-hydrogen fuel
Ageenko Y.I., Lapshin E.A., Morozov I.I., Pegin I.V., Ryzhkov V.V.
Method of first-approximation calculation of take-off weight of a light aircraft with a hybrid propulsion system
Sychev A.V., Arbuzov I.V., Ravikovich Y.A.
Methodology for thermal calculation of the heat exchanger for cooling the air at the intake of the aerospace plane engine compressor
Panchenko S.L., Gras’ko T.V.
Standardization of diagnostic indicators of gearbox teeth wear in aircraft gas-turbine engines
Sunduckov A.Y., Shakhmatov Y.V.
Сalculated analysis of the influence of operation and design factors on the parameters of oxygen-hydrogen low-thrust rocket engines
Ryzhkov V.V., Morozov I.I.
Assessing the efficiency of flights to high near-earth orbits using boosters with chemical and electro-rocket engines
Ishkov S.A., Fadeenkov P.V., Balakin V.L.
Seal designing in a structure of the cooling system in gas turbine engine
Vinogradov A.S., Myatlev A.S.
Aircraft electric power plants
Kondryakov A.D., Leontiev M.K.
Calculation of optimum transfers from high-elliptic orbits to geostationary orbits using a stationary plasma engine
Kvetkin A.A., Kolesov A.V.
Experimental studies of the components of high-frequency ion engine RD0310
Kazbanov A.A., Dronov P.A., Spivak O.O., Derkachev A.B.
Research of gas turbine engine operation in dust-filled atmosphere
Abdullin B.R., Akmaletdinov R.G., Goumerov K.S., Nigmatullin R.R.
Comparative results of computational and theoretical study of the annular nozzle with a flat central body
Kirshina A.A., Levikhin A.A., Kirshin A.Y.
Test bench for investigation of thrusters intra-chamber working processes
Pervyshin A.N., Ryazanov A.I.
Empirical metod of predicting aviation piston engine noise
Moshkov P.A.
Algorithm of adaptation of an electronic control system of internal combustion engines to various chemical compositions of gas fuel
Shishkov V.A.
Estimation of parameters of a pulse detonation engine (РDЕ)
Anakin A.T., Tsybizov Y.I.
New methods for identifying diagnostic indicators of the technical condition of aircraft gas turbine engine reduction gearboxes
Sundukov A.Y., Shakhmatov Y.V.
Design procedure of fundamental parameters of the direct-flow detonation pulsing engine
Porshnev V.A.
Cycle parameters of an internal combustion spark-ignition gas piston engine with an electronic control system
Shishkov V.A.
Determining the angle of advance of ignition when switching from petrol to gas depending on fuel mixture burning rate
Shishkov V.A.
Investigation of the influence of broadband mechanical disturbances on the quality of recording interference patterns of GTE-wheel oscillations using a digital speckle pattern interferometer
Ivchenko A.V., Safin A.I.
Influence of complex loading of radial bearings of the oscillation groups of liquid propellant engine steering gear on the frictional moment
Balyakin V.B., Lavrin A.V., Dolgikh D.E.
Technology of computational analysis of the working process parameters of low-thrust rocket engines running on gaseous oxygen-hydrogen fuel with the use of ANSYS CFD
Ryzhkov V.V., Morozov I.I.
Multi-purpose high-precision thermal vacuum testing bench and someresults of firing tests of non-hypergolic low-thrust rocket engines
Ryzhkov V.V., Verjasov Y.N., Galperin R.N., Gulyaev Y.I., Ivashin Y.S.
Development and research testing of a low thrust on gaseous-propellant rocket engine chamber
Musteikis A.I., Levikhin A.A., Kolosenok S.V.
Verification of aero-engine numerical rotor models based on virtual static structural and modal tests
Shaposhnikov K.V., Degtyarev S.A., Leontiev M.K., Anisimov S.V.
Determination of the optimal parameters and engine layout for a strike unmanned aerial vehicle
Zinenkov Y.V., Lukovnikov A.V., Agaverdyev S.V.
Operation of an electronic system of control for spark-ignition gas fuel internal combustion engines in ignition misses
Shishkov V.A.
Analysis of low-thrust liquid rocket engines with a methane air pump unit
Ivanov A.I., Kositsin I.P., Borisov V.A.
Oxygen-hidrogen liquid rocket engine using turbo-pump developed for aviation hidrogen liquid two-spool turbo-jet
Ivanov A.I., Borisov V.A.
Evaluation of the possibility of using combustion promoters in hydrocarbon fuels for perspective jet engines
Petrukhin N.V., Sergeev S.M., Prokopenko O.A., Grek M.O.
Application of the vacuum casting technology in the production of small-size gas turbine engine blade machines
Faramazyan A.M., Remchukov S.S., Demidyuk I.V.
The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters
Omar H.H., Kuz'michev V.S., Zagrebelnyi A.O., Grigoriev V.A.
Verification of a design model and evaluation of a technique of manufacturing aircraft engine composite parts on the basis of dynamic tests
Zinin A.V., Arkhipov A.N., Kholobtsev D.P., Ravikovich Y.A., Shevjakov A.O., Kholmanova M.A.
Internal combustion engine some cooling system components detailed calculation
Kolomin I.V., Ajukov A.A., Birjuk V.V.
Methodology of optimization of parameter of matching the combustion chamber and turbine joint operation
Grigoriev A.V., Golubchikov P.P., Ilushin M.Y., Rudakov O.A., Solovieva A.V.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Determination of large-size liner impedance based on numerical simulation of sound propagation in a duct with specified azimuthal modal structure
Korin I.A., Palchikovskiy V.V., Pavlogradskiy V.V.
Micro gas turbine engine imitation model
Kuznetsov A.V., Makaryants G.M.
Method of transient simulation of combustion processes in a low-thrust rocket engine operating on gaseous hydrogen and oxygen
Zubanov V.M., Shabliy L.S., Stepanov D.V.
Relationship between carbon concentration in a fuel and characteristics of flame propagation with a magnitude of ion current
Shaykin A.P., Budaev S.I., Galiev I.R.
Research of hydrodynamic processes in the lubrication system of gas turbine engines
Gulienko A.I., Shchurovskiy Y.M.
Functional analysis of periodic disturbances during intermittent cutting
Kolodyazhny D.Y.
Computer-aided design of aircraft gas turbine engines and selection of materials for their main parts
Akhmedzyanov D.A., Kishalov A.E., Markina K.V.
Verification of energy efficiency of a low-thrust liquid-propellant engine with the deflector-centrifugal injecting pattern
Ageenko Y.I., Pegin I.V.
The influence of the shuttle effect on the intensification of heat losses in a Stirling engine
Savchenko V.A., Stolyarov S.P.
Building foundations of virtual information-based educational environment
Zelenko L.S., Zagumennov D.A., Zinchenko A.O.
A simplified method of thermoacoustic engine analysis
Zynovyev E.A., Dovgyallo A.I.
Investigation of the possibility of the creation LREST by thrust 400 N with a baffle - centrifugal scheme of NT and NDMG mixing
Ageenko Y.I., Ilin I.V., Pegin I.V., Shalamov E.A.
Numerical simulation of gas temperature spatial distribution in a full-size gas turbine combustor and its one-burner sector
Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.
Evaluation of internal combustion engine cycle work using an ionic current sensor
Ivashin P.V., Ramazanov M.P., Tverdokhlebov A.Y., Shaikin A.P., Yasnikov I.S.
Operational testing of thermoplastic reinforced blades
Krutsilo V.G., Krotinov N.B.
Progressive thermodynamic cycle of internal combustion engine based on сrank a rod the mechanism with dual kinematic communications
Grabovskiy A.A.
Construction of a blade beam finite element as a component of the blade disk rotary-symmetrical system
Davydov D.P.
Optimal program of controlling continuous low thrust in the flight between noncoplanar elliptical and geostationary orbits
Fadeenkov P.V., Ishkov S.A.
Motion trajectories of the vehicle with mass injection pre-compressor cooling turbojet engines as the first stage of aircraft-space systems
1 1., 1 1.
Oxyhydrogen propulsion device base on water electrolysis and lrest on component H2 + O2 for control system SS
1 1., 1 1., 1 1., 1 1., 1 1.
The interconnection between the benzo(a)pyrene and the soot emissions heat-engine using hydrocarbons fuels
1 1., 1 1., 1 1., 1 1.
Simulation of the distributed selection and supply of cooling air in gas-turb engine
Goryunov A.I., Goryunov I.M.
Identification and procedure of reducing periodic noise of internal combustion car engines using the active compensation method
Vasilyev A.V., Andreyev S.S., Butsayev I.V., Pimkin V.V.
Investigation of energy parameters of small-thrust liquid rocket engines with the geometric expansion ratio of the nozzle F=200
Ageenko Y.I., Nigodyuk V.E., Ryzhkov V.V., Sulinov A.V., Shustov S.A.
Investigation of the characteristics of the component of vibration of gas turbine engine gearbox that causes fatigue failures of its structural elements in case of tooth flank wear
Sundukov A.E.
Design of experiments for verification of computational life prediction methods
Samsonova O.V., Fetisov K.V., Karpman I.V., Burtseva I.V.
Gas turbine engine rotor bearings electrical current damage on the base of NK-family engines for electrical generator drive
Nazdrachev S.V.
Joint work of units and characteristics of elements gas the equipment for the engine of internal combustion with spark ignition
Shishkov V.A., Lesnih U.I.
Aircraft engine design based on unified gas generator
Vinogradov A.S., Parovay Y.F., Mordvinov A.G., Popov D.V., Shirokov M.A.
On selection of automatic control system for crvogenic fuel gas turbine engine
Bukin V.A.
Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades
Sazonov M.B., Solovatskaya L.V.
Theory and calculation of parameters of the detonation engine thermodynamical cycle
Grigoriev A.V., Mitrofanov V.A., Rudakov O.A., Solovieva A.V.
Optimization of ducted counter–rotating fan blades on the basis of solving a 3d inverse problem with the aim of improving fan gasdynamic characteristics
Mileshin V.I., Pankov S.V., Fateyev V.A., Shchipin S.K.
Some issues of research and development in aviation industry
Korchak V.Y., Kuznetsov V.V., Borisenkov I.L., Leonovich G.I., Lukachev S.V., Biryuk V.V.
Using the «virtual engine» software in automatic control system of gas turbine engine
Golberg F.D., Gurevich O.S., Petukhov A.A.
Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber
Kocherova Е.Е.
Dynamic behaviour of high- bypass- ratio turbofan carbon fiber-reinforced plastic blade ubder unsteady airloads
Buyukli T.V., Fedorchenko Y.P., Shorstov V.A.
Increasing the capacity of engine intake system
Kozin A.M., Rusakov M.M.
Experience in the development of 11Д58MФ liquid rocket engines
Smolentsev A.A.
CFD-modeling of processes in a high-pressure oxidizer pump for the turbopump assembly of a liquid rocket engine
Zubanov V.M., Shabliy L.S.
Analysis of the cause of serious flight accident
Vakhrushev D.E., Agaphonov O.A., Pryadko S.P., Schukin A.V.
1 - 100 of 304 Items 1 2 3 4 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies