Search

Issue
Title
Authors
Determination of completeness of combustion, temperature and emission characteristics in a swirl flow based on the theory of turbulent combustion
Aleksandrov Y.B., Mingazov B.G.
Optimization of operation mode and design parameters of a finely-dispersed metallic liquid-alloy generator
Egorychev V.S., Ryazanov A.I., Khaimovich A.I.
Design and development of combustion chambers for gas turbine engines based on calculations of various levels of complexity
Aleksandrov Y.B., Nguyen T.D., Mingazov B.G.
Research of toxic substances emission during water injection into a combustion chamber
Mingazov B.G., Mukhametgaliev T.H.
Experimental method for evaluating the balance of high-speed small-sized internal combustion engines
Rekadze P.D., Sychugov S.Y., Melentiev V.S., Rodionov L.V.
Energy sources in heat engine cycles
Mikheyenkov E.L.
Development of a methodology for calculating the working process of a small-size two-stroke internal combustion engine
Biryuk V.V., Gorshkalev A.A., Zakharov M.O., Larin V.L.
Experimental and numerical investigation of the combustion process in vortex gas burner
Yevdokimov O.A.
Increasing the efficiency and stability of fuel supply to the combustion chamber of a liquid rocket engine by spray nozzles
Ageenko Y.I., Bubnova A.S.
Statistical physics and cycles of operation of heat engines
Mikheenkov E.L.
Results of primary operation of NK-37 engine low emission combustion system
Bantikov D.Y., Yeliseev Y.S., Lavrov V.N., Pchelyakov A.A., Fedorchenko D.G., Tsybizov Y.I.
Applying the possibilities of Microsoft Excel for solving problems of fuel burning thermodynamics
Mikheenkov E.L., Nekrasova S.O., Ramzaeva E.A.
Technology of low-emission fuel combustion and conceptual structure of the combustion chamber of a gas-turbine power plant
Tsybizov Y.I., Tyulkin D.D., Vorotyntsev I.E.
Determination of thermal state and modification of the flame tube cooling system with the help of three-dimensional modeling methods
Matveev S.G., Anisimov V.M., Zubrilin I.A., Kolomzarov O.V., Mironov N.S.
Evaluation of internal combustion engine cycle work using an ionic current sensor
Ivashin P.V., Ramazanov M.P., Tverdokhlebov A.Y., Shaikin A.P., Yasnikov I.S.
Numerical investigation multifuel combustion gas turbine combustion chamber module
Malygina M.V.
Theory of gas turbine engine optimal gas generator
Grigoriev A.V., Kosmatov A.A., Rudakov О.A., Solovieva A.V.
Common properties of hydrocarbon combustion products and Brayton cycle
Mikheenkov E.L.
Peculiarities of gas temperature field formation at the exit of small-sized gas turbine engine combustion chambers
1 1., 1 1., 1 1.
Effect of non-uniform compressor flow parameters on the characteristics of a gas turbine engine combustion chamber
Matveev S.G., Orlov M.Y., Zubrilin I.A., Matveev S.S., Tsybizov Y.I.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Indirect determination of the presence of vibration combustion in combustion chambers of turbine engines by a three-channel sensor for measuring movement
Limanova N.I., Yudin P.Y., Limanov I.A.
Multisprayer low-emission combustion chamber of modern turbojet engines – N. D. Kuznetsov’s creative heritage
Bantikov D.Y., Vasilyev V.I., Lavrov V.N., Tsibisov Y.I., Matveev S.G., Orlov M.Y., Zubrilin I.A.
Influence of the turbine ignition, flame tube suspension and nozzles on the combustion chamber characteristics
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Specific features of pressure pulsation control in combustion chambers of land based gas turbine units
Skiba D.V., Maksimov D.A., Kashapov R.S., Kharisov T.S.
Application of additive technology of selective laser melting (SLM) in designing a low emission combustion chamber of a gas turbine plant
Yeliseev Y.S., Fedorchenko D.G., Golanov S.P., Tsibisov Y.I., Tyulkin D.D., Vorotyntsev I.E., Ivchenko A.V.
Experience of operational development of starting characteristics of the APU combustion chamber
Chechulin A.Y.
Features of start-up the engine of internal combustion with spark ignition on gas fuel
Shishkov V.A.
Theoretical and experimental studies of a gas stamping device with a piston pressure multiplier
Botashev A.Y., Bayramukov R.A.
Method of calculating the thickness of the combustion chamber of a liquid rocket engine made with the use of innovative technologies and materials
Krivonogov A.V.
Analysis of combustion models applicability for designing combustion chamber with a large number of nozzles
Mingazov B.G., Yavkin V.B., Sabirzyanov A.N., Baklanov A.V.
Using an ionization probe removed from the sparking plug for the development of a two-zone ICE combustion model
Ivashin P.V., Rybakov M.P.
Fuel spraying and mixing in a simulated combustion chamber in the presence of air flow precession
Sviridenkov A.A., Tretyakov V.V.
Modeling of intrachamber processes in an oxygen-hydrogen thruster
Vaulin S.D., Salich V.L.
On plasma support of fuel burning in a combustion chamber of a gas-turbine facility
Bulaeva M.N., Kravchenko I.V., Riaby V.A., Tkachenko D.P.
Optimization of design diffuser of GTE combustion chamber with using CAE-systems
Orlov M.Y., Matveev S.S., Zinkovskiy V.S.
Peculiarities of application of biofuel mixture in combustion chambers of modern gas turbine engines
Vasilyev A.J., Medvedev R.S., Chelebyan O.G.
Analysis of nonstationary thermal state of a low-thrust liquid rocket engine taking into account injection, evaporation and combustion of liquid fuel droplets
Vorobiev A.G., Borovik I.N., Ha S.
Development of advanced low thrust rocket engines with ecologically friendly propellants
1 1., 1 1., 1 1.
Modeling of the heat exchange processes
Limanova N.I., Mamzin E.A., Matveev S.G.
Simulation of drop coagulations in swirled time dependent streams with reference to gas turbine engine combustion chambers
Sviridenkov A.A., Tretyakov V.V.
Analyzing the quality of preparing fuel-air mixture and its influence on NOx in a low emission gas turbine engine combustion chamber
Markushin A.N., Baklanov A.V.
Homogeneous burners of two-staged combustion chambers
Grechishnikov O.V., Ostapets I.I., Roslyakov A.D., Tsybizov Y.I.
Joint work of units and characteristics of elements gas the equipment for the engine of internal combustion with spark ignition
Shishkov V.A., Lesnih U.I.
Improving the efficiency of diesel engines by means of electroprocessing of fuel
Kozmenkov I.N., Nosyrev D.Y.
Comparative analysis of fuel distribution downstream of the gas-dynamic flame holder with various methods of injection
Tretyakov V.V., Sviridenkov A.A.
Method of transient simulation of combustion processes in a low-thrust rocket engine operating on gaseous hydrogen and oxygen
Zubanov V.M., Shabliy L.S., Stepanov D.V.
Combustion of condensed substance in the electrostatic field
Zyryanov I.A., Pozolotin A.P.
ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing
Nuzhnov Y.V.
Investigation of transformation of intermediate products of liquid-phase interaction propellant at the onset of combustion for rocket engine
Nigodjuk V.E., Sulinov A.V.
Interaction of exhaust jets of rocker propulsions on various propellants with atmosphere for estimation of ecological safety of firing of rockets and launchers
Zavelevich F.S., Ushakov N.N.
Approaches to the evaluation of fuels for hypersonic engines
Sergeev S.M., Petrukhin N.V.
Development of pneumatic- type starting nozzles for a full-scale low emission combustion chamber
Vasilyev A.J., Blumkin P.I., Chelebyan O.G.
Some results of experimental refining of a constant volume valve combustion chamber
Bogdanov V.I., Kuznetsov S.P.
Manipulate pulsed detonation engine
1 1., 1 1.
Pressure-gain combustion and its potential for gas turbine engine enhancement
Lutoschkin E.V., Rose M.G., Staudacher S.
Combustion of polymers in the electrostatic field
Reshetnikov S.M., Pozolotin A.P., Zyryanov I.A.
Test benches for researching the processes and operational development of low emission gas turbine engine combustion chambers
Markushin A.N., Baklanov A.V.
Method of reduced fuel characteristics and parameters of the operating cycles of heat engines
Anastaseev V.V., Belozertsev S.V., Mikheenkov E.L., Nekrasova S.O.
Calculation of flow characteristics of liquid fuel supplied through pressure jet atomizers of small-sized gas turbine engines
Gurakov N.I., Zubrilin I.A., Hernandez Morales M., Yakushkin D.V., Didenko A.A., Matveev S.G., Komisar Y.V.
Influence in a constructive and regime parameters antechamber by operation-in the combustion chamber liquid-propellant rocket engine thrusters on hypergolic liquid propellants
Nigodjuk V.E., Sulinov A.V.
Testing of combined air-rocket engine mak-up with pulsing combustion chamber
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Experimental research on the development of an “oxygen (gas) + kerosene” – fueled thruster
Salich V.L.
Efficiency of aft diffusers in vacuum systems of test benches for high-altitude firing tests of low-thrust liquid rocket engines
Galperin R.N., Gulyaev Y.I., Ivashin Y.S., Nigodjuk V.E., Ryzhkov V.V., Sulinov A.V.
Construction of detailed kinetic mechanisms of forming for five ring PAH and their reduction for use in modern CAE systems
Matveev S.G., Chechet I.V.
Investigation of thermal explosion in a pseudoliquid fuel
Yegorov A.G., Safronov A.I., Tizilov A.S., Ivanin S.V.
Cycle parameters of an internal combustion spark-ignition gas piston engine with an electronic control system
Shishkov V.A.
Mathematical model and peculiarities of operating mobile robots with hybrid drives
Ilyukhin Y.V., Tatarintseva A.V.
Emission characteristics and temperature non-uniformity at the outlet of the gas turbine engine combustion chamber
Sabirzyanov A.N., Yavkin V.B., Alexandrov Y.B., Markushin A.N., Baklanov A.V.
Algorithm of adaptation of an electronic control system of internal combustion engines to various chemical compositions of gas fuel
Shishkov V.A.
The simplification of heat engines thermodynamics calculation with using of idaeal gas’ model
1 1., 1 1.
Identification and procedure of reducing periodic noise of internal combustion car engines using the active compensation method
Vasilyev A.V., Andreyev S.S., Butsayev I.V., Pimkin V.V.
Mathematical model for calculating radial non-uniformity of the gas temperature field at the exit of small gas turbine engine combustion chambers
Lukachev S.V., Abrashkin V.Y., Lansky A.M., Matveev S.G.
Physical workflow model in the combustion chamber LREST with a jet-centrifugal jets on hypergolic propellants
Silyutin M.V., Shustov S.A.
The numerical modelling of processes in combustion chambers of low thrust rocket engines
Salich V.L.
Choosing the mixing pattern for oxygen-hydrogen low-thrust rocket engines
Ryzhkov V.V., Morozov I.I.
Using the phenomenon of electrical conduction of flame of non-homogeneous air-fuel mixture in design and development of combustion chamber
Shajkin A.P., Ivashin P.V., Galiev I.R., Derjachev A.D., Tverdohljobov A.J.
Simulation of aerodynamic structure of the flow in the combustion chamber of a small-size gas turbine engine with the help of CAE–systems
Matveev S.G., Orlov M.Y., Abrashkin V.Y., Zubrilin I.A., Matveev S.S.
The concept of matching the joint operation of the combustion chamber, the compressor and the turbine
Grigoriev A.V., Golubchikov P.P., YIlushin M.Y., Rudakov O.A., Solovieva A.V.
Problems and solutions of using computer technologies in designing of combustion chambers GTE
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Determining the angle of advance of ignition when switching from petrol to gas depending on fuel mixture burning rate
Shishkov V.A.
3d calculation of a multiport low-emission combustor cooling system
Moreva I.S., Vasilyuk D.K., Kirichenko R.Y.
Hanges in volume combustion and concentration of nitrogen oxides in the exhaust gases gasoline engine
Kolomiets P.V.
Using the energy of gas differential pressure in electromagnetic injectors for improved breathing of spark-ignition internal combustion engine cylinders
Shishkov V.A.
The story of invention and development of supercharge units of internal combustion engines
1 1., 1 1., 1 1.
Model of varigrained particle stream moving by hypersonic combustion materials investigation
Bulanova E.A., Pervishin A.N.
The influence of engineering changes on NOx emission in a gas-turbine endine combustion chamber
Mingazov B.G., Baklanov A.V.
Correlation and regression model for the assessment of circular non-uniformity of the gas temperature field at the outlet of small gas turbine engine combustion chambers
Lukachev S.V., Abrashkin V.Y., Lansky A.M., Matveev S.G.
New technologies implemented in the design of a low-emission combustion chamber of a gas-turbine unit
Fedorchenko D.G., Tsybizov Y.I., Tyulkin D.D., Vorotyntsev I.E., Zherelov D.A., Dulov A.S., Smelov V.G., Sotov A.V., Agapovichev A.V.
Analisys of experimental combustion chambers fire tests for LRE with cooling by liquid oxigen for "DM" type booster
Smolentsev A.A., Strizhenko P.P.
Methodology of optimization of parameter of matching the combustion chamber and turbine joint operation
Grigoriev A.V., Golubchikov P.P., Ilushin M.Y., Rudakov O.A., Solovieva A.V.
Development of a new collector device for gas turbine engine afterburner
Teslya D.N., Mayatsky S.A., Grasko T.V.
Influence of the burner form on the combustion chamber outlet temperature field ripple for different modes of operation of gas turbine engines
Markushin A.N., Baklanov A.V.
Modeling of propane combustion processes in case of converting a GTE combustion chamber to gaseous fuel
Matveev S.G., Lanskiy A.M., Orlov M.Y., Abrashkin V.Y., Dmitriev D.N., Zubrilin I.A., Semenov A.V.
Experimental investigations of fluid atomization by model frontal devices of combustion chambers
Vasilyev A.Y., Sviridenkov A.A., Tretyakov V.V.
Strength analysis of internal combustion engine elements by using ANSYS with taking into account heat processes in the combustion chamber
Biryuk V.V., Gorshkalev A.A., Kayukov S.S., Saigakov E.A.
Formation in the channels of the block catalyst the micro vortex gas flows with intense twist
Knysh Y.A., Zibizov Y.I., Dmitriev D.N., Gorshkalev A.A.
Numerical simulation of gas temperature spatial distribution in a full-size gas turbine combustor and its one-burner sector
Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.
Defining the specific impulse of mixed solid propellants
1 1., 1 1.
Development and study of the designs of sprayers with increased speed for internal combustion engine (ice)
, ,
1 - 100 of 145 Items 1 2 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies