Search

Issue
Title
Authors
Ensuring vibration characteristics of reactor plant centrifugal pumping equipment
Savchuk D.V., Bescherov D.E., Kulikov D.A., Panov V.A., Patrushev V.L., Porfiriev M.S., Soloviev S.A.
Verification of a transonic stage CFD model for assessing the erosion wear influence on the operation of the axial compressor
Blinov V.L., Zubkov I.S.
JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines
Vinogradov K.A., Nikulin A.S., Shmotin Y.N.
Small-sized two-coordinate sensor of the Sun’s angular position with enlarged field of view
Dyuldin R.S., Blinov V.D.
Constructing simulation models of self-similar telecommunication traffic
Blagov A.V.
Method of automated arrangement of devices in a spacecraft compartment taking into account connection to interface connectors of feed-through plates of an on-board cable system
Belyakov A.A., Prihodko V.I., Shulepov A.I.
Method of individual selection of parts for selective assembly of electrohydraulic servo drives
Medvedev A.V., Khalatov E.M.
Validation of the “stage – diffuser” system numerical study and its use for design modernization
Cherkasova M.G., Semakina E.Y., Chernikov V.A.
Modeling of dynamic processes in micromechanical inertial sensors and their components using specialized software
Barulina M.A., Pankratov V.M.
Verification of aero-engine numerical rotor models based on virtual static structural and modal tests
Shaposhnikov K.V., Degtyarev S.A., Leontiev M.K., Anisimov S.V.
Special features of assessing the strength of nuclear reactor equipment under dynamic loads
Lonin K.A., Panov V.A., Patrushev V.L., Savchuk D.V., Soloviev S.A.
Main approaches and features of the design of aircraft hydro-mechanical control systems
Petrov P.V., Tselischev V.A., Kuderko D.A.
Step-by-step simulation of wear of working surfaces in roller bearings
Klebanov Y.M., Murashkin V.V., Brazhnikova A.M.
Ballistic analysis of a mission to Jupiter’s moon Callisto with landing on the surface
Kovalev V.V., Marchenko A.D., Starostina T.V., Sharipova A.R.
Computer-aided system of virtual gas turbine engine testing
Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Ostapuk Y.A., Filinov E.P.
Comparative analysis of turbulence model influence in numerical simulation of an experimental radial compressor stage
Eremenko V.V., Mikhailov A.E., Mikhailova A.B., Goryukhin M.O., Krasnoperov D.G.
Leader competition in biological and social systems
Pivovarova A.S., Steryakov A.A.
Calculation of spatial distribution of energy of a complex radiator
Yevdokimov I.Y., Nikolaenko V.S., Filippov G.S., Yashchenko B.Y.
Designing an active electronically scanned array as part of onboard equipment of a high-speed radio communication channel
Zhdanov E.R., Slavyanskiy A.O., Kharina O.S., Shpack A.V.
Survey of the flight efficiency of a long-haul aircraft under uncertainty of tasks
Markiewicz P.
3d virtual simulation and casting process optimization of part GTE "Swirler of II duct" with using computer technologies
Vdovin R.A.
Simulation modeling of stock markets
Steryakov A.A.
Creative 2D-modeling
Bykov A.V., Karabcheyev K.S.
Aspects of simulating stable low-cycle fatigue crack growth in the main parts of aircraft gas turbine engines
Ryabov A.A., Mokhov K.Y., Voronkov O.V., Kudryavtsev A.Y., Museev A.A.
Research of restrained bending of aircraft parts with curved sides
Gromova E.G., Moiseev V.K., Sharov A.A., Lomovskoi O.V., Mantusov М.N., Plotnikov A.N.
Enhancement of efficiency of casting processes in production of parts of aircraft engines by way of action of pulse-magnetic field on melt
Chernikov D.G., Glouschenkov V.A., Igolkin A.J.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Computational and experimental research of exhaust gas treatment systems
Galevko V.V., Rakhmatov R.I.
Mathematical modelling of the working process of a hot gas pressure feed system
Salich V.L.
Calculation of parameters of the Deal–Grove model for the oxidation of silicon
Aizikovich A.A., Demakov Y.P.
Specifying the dimensions of the reverse current area of a 3-D gas-turbine engine combustion chamber model using the ANSYS FLUENT software
Biryuk V.V., Orlov M.Y., Zubrilin I.A., Sinegovskiy Y.A., Krivtsov A.V.
Rail electromagnetic accelerators with an external magnetic field
Sukhachev K.I.
Development of methods of designing modern gas turbines
Inozemtsev A.A., Khairulin V.T., Tikhonov A.S., Samokhvalov N.Y.
Role of volume modeling in preparation specialists for innovative mechanical engineering
Ermakov A.I., Chempinsky L.A.
Log-periodic oscillations in hierarchical models
Pivovarova A.S.
Model of the main worm of milling cutters for gear cutting
Androsov S.P., Brailov I.G., Vizigin D.V.
Automated generation of structural members of a spacecraft thermal model
Kulikov D.S., Shatin A.A., Velmisov I.G.
Generation of control programes for disposable unmanned aircraft vehicle propulsion system by means of dynamic characteristic
Mikhailov A.Y., Akhmedzyanov D.A., Akhmetov Y.M., Mikhailova A.B.
Kinematic and dynamic analysis of the basic mechanism of the Wankel engine, based on its vector model
Kosenok B.B.
Mathematical model of complex spatial deformation of rotor blades during helicopter arbitrary motion
Girfanov A.M.
Modeling stable growth of fatigue cracks in aero engine turbine discs under simple and complex loading cycles
Tumanov N.V., Lavrentyeva M.A., Cherkasova S.A., Servetnik A.N.
A model of Markov random field in texture image synthesis and analysis
Plastinin A.I., Kuprijanov A.V.
Analysis of the results of fatigue tests of cylindrical specimens with fillets using the method of finite element modeling
Vakulyuk V.S.
Influence of the reliability of Earth remote sensing spacecraft onboard systems on the monitoring of imaging periodicity
Kirilin A.N., Akhmetov R.N., Kurenkov V.I., Kapitonov V.A., Stratilatov N.R., Lokhmatkin V.V.
Gas-dynamic losses in the flow part of the channel charge of a solid-propellant rocket engine
A. N. Sabirzyanov A.N., Khamatnurova C.B., Kuzmin V.V.
Mathematical model of turbofan engine weight estimation taking into account the engine configuration and size
Avdeev S.V.
Training for innovative engineering through through parametrization
Balyakin V.B., Ermakov A.I., Chempinsky L.A.
Influence of the geometry fidelity of resonant sound-absorbing liner samples on their acoustic characteristics
Kustov O.Y., Khramtsov I.V., Bulbovich R.V.
Selecting a squeeze film damper model for solving problems of gas turbine engine rotor dynamics
Leontiev M.K., Kutakov M.N.
Peculiarities of computer modeling of the working process in small gas turbine engines
Kuz'michev V.S., Tkachenko A.Y., Ostapyuk Y.A.
Simulation of wire manufacturing production cycle
Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.
Vortex gas wind-driven power plant for supplying compressor stations with electrical energy
Biryuk V.V., Zubrilin I.A., Krasnorutskiy A.S.
Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance
Kostichev V.E.
Simulation of operaiting cycle by Petry nets
Zelenskiy V.A., Konnov V.P., Schodro A.I.
Selection of sites and angles for placing star coordinators of remote sensing satellites
Akhmetov R.N., Kurenkov V.I., Stratilatov N.R., Fedorenko O.G., Shilov L.B.
Modelling system of cooling nozzle-sprayer hydrogen steam generator
Lazarenko I.N., Prigozhin A.A., Shmatov D.P.
Resonant method of accelerating non-magnetic materials
Syomkin N.D., Piyakov A.V., Voronov K.Y., Sukhachev K.I.
Solving tasks of control and targeting for remote sensing devices by systems of processing and analysis of visual information
Sbrodov V.V., Sviridov V.P., Safronov S.G.
Numerical simulation of the working process in a vortex tube with an additional stream
Vasilyuk O.V., Piralishvili S.A., Shaykina A.A.
Two-dimentional axial rotor compressor off-design performance prediction model with the use of simulation methods and tools
Mikhailova A.B., Akhmedzyanov D.A., Akhmetov Y.M., Mikhailov A.Y.
Transformation of longitudinal deformation wave at the boundary of conjugation of bars with an elastic element
Manzhosov V.K., Novikova I.A.
Model for the estimation of design work acceleration by parallelization of iterative process in research-intensive mechanical engineering
Komarov V.A., Kremenetskaya M.Y., Sologub A.V., Filatov A.N.
Development of advanced low thrust rocket engines with ecologically friendly propellants
1 1., 1 1., 1 1.
Statistical modeling of the process of serving the leaving passengers at the international Kurumotch airport
Romanenko V.A.
Multi-time-step scheme in the vorticity splitting method applied to the simulation of the wake behind the flat plate
Nikonov V.V., Shakhov V.G.
Analysis of schemes and methods of hydrodynamic cleaning of hydro-fuel system units
Sanchugov V.I., Reshetov V.M.
Economic-mathematical model of space-rocet industry restructuring
Vagapova N.R.
Mathematical modeling of the process of selective laser melting of Ti-6Al-4V titanium alloy powder
Agapovichev A.V., Sotov A.V., Smelov V.G.
Modeling and experimental research of the multi-level drawing and geometric training system
Ivashchenko V.I.
Comparative analysis of fuel distribution downstream of the gas-dynamic flame holder with various methods of injection
Tretyakov V.V., Sviridenkov A.A.
Dynamics of the hydromechanical system of a production machine with an adaptive tool-feeding drive
Sidorenko V.S., Poleshkin M.S., Rakulenko S.V.
Application of simulation modelling in static tests of space-rocket vehicles
Grebnev D.N., Duplihin V.K., Zuperman J.A., Aistov A.I., Kukushkin V.E.
Study of characteristics of the vortex throttling valve for the sysytem of water sample conditioning
Gimadiev A.G., Utkin A.V.
Computer-aided design of aircraft gas turbine engines and selection of materials for their main parts
Akhmedzyanov D.A., Kishalov A.E., Markina K.V.
Analysis and modeling of current-voltage characteristics of the tunnel diode
Piganov M.N., Dmitriev V.D., Tyulevin S.V., Kochkina A.V.
Combined calculation of gas generators of small GTE in package ANSYS CFX
Matveev S.G., Orlov M.Y., Matveev S.S., Zinkovskii V.S., Krivtsov A.V.
Mathematical modeling of processes of compression and expansion in the piston pump with a gas damper
Shcherba V.E., Pavlyuchenko E.A., Kuzhbanov A.K.
Simulating electromagnetic field distribution due to electrostatic discharge on the spacecraft surface
Syomkin N.D., Balakin V.L., Bragin V.V.
Development of automated systems LC UPD
Blyumenshteyn A.A., Chernikov M.S., Zheleznov O.V.
Analysis of stress distribution in the dangerous section area of specimens with fillets under bending using the finite-element modeling method
Vakuljuk V.S.
Hard & soft complex for “Angara” family launch vehicles engine system development
Partola I.S.
Statistical phenomena of greater distributed clusters of nanosatellites
Mostovoy J.A.
Multi-scale complex failure analysis of aero engine compressor disks
Tumanov N.V., Porter A.M., Lavrentyeva M.A., Cherkasova S.A., Vorobyova N.A., Lyoshin D.P.
The modeling of kinematics of plastic current at bending process of branch pipes distribution
, ,
Computer simulation of thin-walled tube sink drawing
Kargin V.R., Kargin B.V., Pastushenko T.S., Yerisov Y.A.
Dissipative structures of the Gierer-Meinhardt model of morphogenesis in the stochastic field
Kurushina S.E.
Analysis of potentialities of coil electromagnetic accelerators for the accelerating of ferromagnetic particles
Sukhachev K.I., Syomkin N.D.
Modelling of solving problems of Samara region ‘s water bodies bathymetry by means of Earth remote sensing
Anshakov G.P., Malinovskii V.A., Sinelnikova E.A., Skirmunt V.K.
Strength calculation of parts based on stress state stiffness
Bukatyi A.S., Bukatyi S.A.
Gas turbine engine dynamic model based on variable-memory LSTM architecture
Kuznetsov A.V., Makaryants G.M.
Complex failure analysis of aero engine compressor blades
Sachin V.M., Tumanov N.V., Lavrentyeva M.A., Cherkasova S.A.
Numerical simulation of low liquid flow in a mixer consisting of two centrifugal swirlers
Semkin E.V.
Selection of reference specimens for assessing the efficiency of part surface nitriding
Sazanov V.V.
Simulation of the process of angular rate damping of the SamSat-218D nanosatellite after separation from the launching-transporting container
Melnik M.E.
Procedure of accomodation of earth remote sansing satellite external devices with regard for the satellite target operation
Akhmetov R.N., Shilov L.B., Kurenkov V.I., Yakischik A.A.
Experience of operational development of starting characteristics of the APU combustion chamber
Chechulin A.Y.
Modeling of intrachamber processes in an oxygen-hydrogen thruster
Vaulin S.D., Salich V.L.
Comparison of mathematical simulation results and experimental research of PVD-K3-1 air pressure probe
Moiseev V.N., Dubinina M.M., Pavlovsky A.A., Sorokin M.Y.
Residual stresses distribution regularities in the smallest section of hardened hollow cylindrical detail with circular cut
Sazanov V.P., Larionova Y.S., Kolychev S.A.
Investigation of the causes of the auger-centrifugal pump bearing destruction
Gafurov S.A., Rodionov L.V., Shahmatov E.V.
1 - 100 of 192 Items 1 2 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies