Search

Formation of a method of choosing rational values of ultralow power turbine parameters in a turbine drive system

Kalabuhov D.S., Grigoryev V.A., Rad’ko V.M.

(Rus)

Vol 22, No 4 (2023)

JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines

Vinogradov K.A., Nikulin A.S., Shmotin Y.N.

(Rus)

Vol 21, No 2 (2022)

Influence of pad geometry and method of oil supply on the thermal state of GTE rotor tilting-pad journal bearing

Parovay E.F.

(Rus)

Vol 17, No 3 (2018)

Evaluation of turbine rotor blade life taking into account static and thermal cyclic loading

Badamshin I.K.

(Rus)

Gas-turbine unit development experience for rotors wedging correction

Kozlyakova I.S., Krupin V.P., Potkin A.N., Fadeev V.A.

(Rus)

Vol 21, No 2 (2022)

3D investigation of heat exchange and hydrodynamics of high pressure turbine nozzle block platforms with different cooling schemes

Gorelov Y.G., Ananyev V.V., Zolotuhina D.A.

(Rus)

Off-line long-life unservice close gas organic fuel-powered turbine

Arbekov A.N.

(Rus)

Vol 16, No 1 (2017)

Improvement of gas turbine engines due to isothermal expansion in the turbine

Muraeva M.A., Gorjunov I.M.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Design of the gas turbine engine rotor wheel with ceramic blades

Sapronov D.V., Reznik S.V.

(Rus)

Vol 23, No 3 (2024)

Gas dynamic optimization of the work process of a single-stage cooled axial turbine with an inside baffle

Popov G.M., Goryachkin E.S., Melnikov S.A., Shcherban A.I., Gataullina E.D.

(Rus)

Vol 20, No 4 (2021)

Special aspects of numerical simulation of a two-stage axial-flow compressor with defective blades

Blinov V.L., Zubkov I.S., Iskortsev E.Y., Belyaev O.V., Plishkin P.I.

(Rus)

Structure and physico-mechanical properties of heat resistant gazoplazmennyh coating NiCrCoAlY/ZrO2 for turbine blades of gas turbine engines

Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fehl Y.A.

(Rus)

Vol 17, No 1 (2018)

Methods of evaluating low-cycle fatigue of gas turbine engine parts exemplified by a high-pressure turbine cover plate

Kocherova E.E.

(Rus)

Vol 15, No 4 (2016)

Mathematical models for evaluating the energy efficiency of ultralow power turbine drives

Kalabuhov D.S., Grigoryev V.A., Rad’ko V.M.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Validation of CFD-models of gas turbine engine uncooled turbines

Matveev V.N., Popov G.M., Goryachkin E.S., Smirnova Y.D.

(Rus)

Project of 30 000 h.p. power gas turbine

Zrelov V.A.

(Rus)

Vol 23, No 1 (2024)

Investigation of the influence of broadband mechanical disturbances on the quality of recording interference patterns of GTE-wheel oscillations using a digital speckle pattern interferometer

Ivchenko A.V., Safin A.I.

(Rus)

Vol 21, No 4 (2022)

Series of diagnostic indicators of gearbox teeth wear in aircraft gas turbine engines

Sundukov A.Y., Shakhmatov Y.V.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Development of methods of designing modern gas turbines

Inozemtsev A.A., Khairulin V.T., Tikhonov A.S., Samokhvalov N.Y.

(Rus)

Vol 14, No 3 (2014)

Application of thermoplastic hardening for restoration of fatigue durability of gas turbine disks

Vishnyakov M.A.

(Rus)

Vol 10, No 2 (2011)

Design of bimetallic impeller for gas turbine

Magerramova L.A.

(Rus)

Vol 23, No 1 (2024)

Neural network controller of a gas turbine plant low emission combustor

Avgustinovich V.G., Kuznetsova T.A., Sukharev A.A.

(Rus)

Vol 22, No 4 (2023)

Method of scanning thin surfaces in repairing gas turbine blades

Kotlyar D.I., Lomanov A.N.

(Rus)

Vol 15, No 4 (2016)

Peculiarities of computer modeling of the working process in small gas turbine engines

Kuz'michev V.S., Tkachenko A.Y., Ostapyuk Y.A.

(Rus)

Vol 19, No 4 (2020)

Сalculation of characteristics of atomization of liquid supplied at an angle to the flow direction and justification of adjusting the angle of the nozzle inclination relative to the gas flow

Teslya D.N., Mityaev S.V., Drobyshev P.A.

(Rus)

Vol 18, No 4 (2019)

Formation of film cooling on the turbine blade back and pressure side in the case of using V-shaped dimples

Lebedev V.V., Lebedev O.V., Remizov A.E.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Determination of a rational combination of the radial turbine basic parameters with an allowance for strength, technological and other constraints

Baturin O.V., Shabliy L.S.

(Rus)

On selection of automatic control system for crvogenic fuel gas turbine engine

Bukin V.A.

(Rus)

Vol 18, No 1 (2019)

Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 16, No 2 (2017)

Micro gas turbine engine imitation model

Kuznetsov A.V., Makaryants G.M.

(Rus)

Vol 15, No 4 (2016)

Development of an exhaust air turbine engine

Yeliseev Y.S., Fedorchenco D.G., Tsibizov Y.I., Tyulkin D.D., Tkachenko A.Y.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Conversion of gas turbine engine oil system

Boev A.A., Grishanov O.A.

(Rus)

Vol 10, No 5 (2011)

Simulation of aerodynamic structure of the flow in the combustion chamber of a small-size gas turbine engine with the help of CAE–systems

Matveev S.G., Orlov M.Y., Abrashkin V.Y., Zubrilin I.A., Matveev S.S.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Calculation of exciting aerodynamic load on a gas turbine engine compressor blade induced by the effect of a non-uniform gas flow

Ermakov A.I., Shklovets A.O., Fedorchenko D.G.

(Rus)

Research of gas turbine engine operation in dust-filled atmosphere

Abdullin B.R., Akmaletdinov R.G., Goumerov K.S., Nigmatullin R.R.

(Rus)

Vol 11, No 3-3 (2012): Special Issue

Combined calculation of gas generators of small GTE in package ANSYS CFX

Matveev S.G., Orlov M.Y., Matveev S.S., Zinkovskii V.S., Krivtsov A.V.

(Rus)

Choosing the optimal method of the centrifugal loads modeling using 2D FE models of the compressor’s disks slots

Balyaeva N.N., Guschin A.Y.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Use of the dynamic programming method for solving tasks of GTE management optimization using the aircraft efficiency criteria

Tkachenko A.Y., Kuzmichev V.S.

(Rus)

Vol 12, No 3-2 (2013): Vestnik SSAU

Defects of shrouded blade platforms of high-temperature gas turbines

Belousov A.I., Nazdrachyov S.V.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Vortex effect and intensification of heat and mass transfer in cell energy technology

Piralishvily S.A., Veretennikov S.V.

(Rus)

Vol 9, No 1 (2010)

Compulsory ignition of fuel-air mixture in small-sized gas turbine engine combustion chambers

1 1., 1 1., 1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Features of designing gas turbine of complex cycle GT24

1 1.

(Rus)

Estimation the factors, make the greatest influence on reliability parametres of a GTD disk with a glance sudden failures

Belousov A.I., Gritsin A.V.

(Rus)

Vol 8, No 1 (2009)

Problems of making auxiliary gas turbine engines with gas bearing rotors

Ponomaryov B.A., Gavrilov V.V.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Estimation of parameters of a pulse detonation engine (РDЕ)

Anakin A.T., Tsybizov Y.I.

(Rus)

Vol 19, No 4 (2020)

The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters

Omar H.H., Kuz'michev V.S., Zagrebelnyi A.O., Grigoriev V.A.

(Rus)

Vol 18, No 4 (2019)

Improvement of fretting wear resistance of blade root made of polymer composite material

Karimbayev T.D., Afanasiev D.V., Matyukhin D.V., Orlov M.A.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Numerical study of possibility of reliable diagnostics of gas turbine engine by gasdynamic parameters using a linear mathematical model

Gerasimov A.B., Sundukov M.Y.

(Rus)

Research of the postoperational condition of the restored compressor shovels of GTD gas-transfer of the units which have fulfilled the appointed resource

Tarasenko Y.P., Tsareva I.N., Krivina L.A.

(Rus)

Vol 18, No 1 (2019)

Research of the operability of an air-fuel lubrication and cooling system of gas turbine engine rotor bearings

Klimov V.N., Dud’ev D.Y., Sigaylo V.Y., Klimov N.I., Mashkov Y.K.

(Rus)

Vol 17, No 2 (2018)

Development of a multiuser system web-interface as a tool of using mathematical packages for solving engineering tasks

Danilenko A.N., Zhdanov I.A.

(Rus)

Vol 16, No 1 (2017)

Evaluation of low cycle fatigue based on the use of Coffin-Manson dependence under zero-to-“soft” loading cycle

Pavlov V.F., Kirpichyov V.A., Kocherova E.E., Zlobin A.S.

(Rus)

Vol 15, No 4 (2016)

Using the «virtual engine» software in automatic control system of gas turbine engine

Golberg F.D., Gurevich O.S., Petukhov A.A.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Application of numerical simulation systems for the research of the blade casting process in blank production

Smelov V.G., Vdovin R.A., Agapovichev A.V.

(Rus)

Vol 10, No 5 (2011)

Modeling of propane combustion processes in case of converting a GTE combustion chamber to gaseous fuel

Matveev S.G., Lanskiy A.M., Orlov M.Y., Abrashkin V.Y., Dmitriev D.N., Zubrilin I.A., Semenov A.V.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Research of the validity of forecasting low cycle durability of gas turbine engine parts based on Manson’s equation

Porter А.M., Bukatyi S.A., Leshin D.P.

(Rus)

Experimental investigation of a small-sized centrifugal compressor for a closed-brayton cycle gas turbine power system

Arbekov A.N., Novitskiy B.B.

(Rus)

Vol 11, No 3-3 (2012): Special Issue

Approaches to parametric models of blade machines formation

Shabliy L.S., Popov G.M., Kolmakova D.A.

(Rus)

A technique to estimate efficiency of turbine underplatform friction dampers

Nikhamkin M.S., Sazhenkov N.A.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Dependence of required turbine inlet temperature at cruise mode of long-term flight on bypass ratio

Rybakov V.N.

(Rus)

Vol 13, No 2 (2014)

Discrete phase converters moving elements rotating units power units

Danilin A.I., Grechishnikov V.M.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Effect of cavity width on performance of pre-swirl systems

Didenko R.A., Karelin D.V., Ievlev D.G., Lebedev V.V., Belousova E.V.

(Rus)

Vol 9, No 1 (2010)

The influence of operational and technological factors on the dynamic parameters of elastic elements of elastic damping rotor supports

1 1., 1 1., 1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Way of increase in efficiency of cycle gas turbine units

1 1.

(Rus)

Simulation of the distributed selection and supply of cooling air in gas-turb engine

Goryunov A.I., Goryunov I.M.

(Rus)

Vol 7, No 3 (2008): Special Issue

Calculated study of tangential inclination of nozzle vanes influence on gas-dynamic efficiency of axial turbine stage

Baturin O.V., Matveev V.N.

(Rus)

Vol 12, No 4 (2013)

Improvement of the quality of the surfaces of monowheel blades of liquid rocket engine turbopump assemblies

Mozgov S.A., Panov D.V., Saushkin B.P.

(Rus)

Vol 19, No 4 (2020)

Investigation of the characteristics of the component of vibration of gas turbine engine gearbox that causes fatigue failures of its structural elements in case of tooth flank wear

Sundukov A.E.

(Rus)

Vol 18, No 3 (2019)

Design of experiments for verification of computational life prediction methods

Samsonova O.V., Fetisov K.V., Karpman I.V., Burtseva I.V.

(Rus)

Comparative analysis of facilities for the implementation of thermoplastic hardening blades of gas turbine engines and pumping units

Karpov A.V.

(Rus)

Experiment-calculated research of the influence of the shot-peening strengthening upon the low-cycle fatigue of the gas turbine parts with the stress concentrator

Porter A.M., Bukaty S.A., Leshin D.P., Bukaty A.S.

(Rus)

Vol 17, No 4 (2018)

Optimization of fuel distribution in the afterburner of a gas turbine engine

Nelyubin V.R.

(Rus)

Vol 17, No 2 (2018)

Improvement of friction units of power plants by aplying ceramic composite spray coatings

Siluyanova M.V., Fertikov A.O.

(Rus)

Vol 15, No 3 (2016)

The influence of booster design features on aicraft engine fan tonal noise

Khaletskiy Y.D., Korzhnev V.N., Pochkin Y.S.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Optimization of the workflow of multistage axial turbines with platforms

Matveev V.N., Baturin O.V., Popov G.M., Goryachkin E.S.

(Rus)

Vol 10, No 5 (2011)

The concept of matching the joint operation of the combustion chamber, the compressor and the turbine

Grigoriev A.V., Golubchikov P.P., YIlushin M.Y., Rudakov O.A., Solovieva A.V.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Development of the construction of a gas turbine engine vane with built-in vortex tubes

Veretennikov S.V., Barinov S.N.

(Rus)

Development of a prototype of a multi-loop closedbrayton cycle gas turbine power system

Arbekov A.N., Novitskiy B.B.

(Rus)

Vol 11, No 3-3 (2012): Special Issue

Gas turbine engine designing on the basis of a unified gas generator

Rybakov V.N.

(Rus)

Selection of optimal configuration and workflow parameters of autonomous micro gas turbine plant

Baturin O.V., Smirnova Y.D.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

The defectoscopy of the fatigue cracks in the gas turbine parts by means of eddy-current method

Porter A.M., Bukatyi S.A., Leshin D.P., Vasilchuk M.V., Galickyi A.A.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Influence of the initial design data uncertainty on the choice of optimal working process parameters of gas turbine engine

Kuzmichev V.S., Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Kulagin V.V.

(Rus)

Vol 13, No 2 (2014)

Circuit design receipt autodynes signal to converter displacement parameters elements rotating parts of turbune unit

Danilin A.I., Gretskov A.A.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Effect of radial location of nozzles on width on performance of pre-swirl systems

Didenko R.A., Karelin D.V., Ievlev D.G., Lebedev V.V.

(Rus)

Vol 9, No 1 (2010)

Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine

1 1., 1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Probabilistic estimate of compressor blades durability to foreign object damage

1 1., 1 1.

(Rus)

Seal designing in a structure of the cooling system in gas turbine engine

Vinogradov A.S., Myatlev A.S.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Test case of 3d unsteady swirling flows modeling using commercial and in-house codes

Nazukin V.A., Avgustinovich V.G., Thornber B., Aguado Lopez P., Tsatiashvili V.V., Koromyslov E.V.

(Rus)

Vol 20, No 4 (2021)

Choice of gas temperature at the turbopump turbine inlet

Ivanov A.V.

(Rus)

Vol 19, No 3 (2020)

Method of coordinating joint operation of air starter and auxiliary power unit and determining the gas turbine engine starting time

Popov G.M., Baturin O.V., Novikova Y.D., Zubanov V.M., Volkov A.A., Korneeva A.I.

(Rus)

Vol 18, No 3 (2019)

Life of gas turbine engine components under corrosive exposure

Pivovarova M.V., Gladkiy I.L.

(Rus)