Search

Issue
Title
Authors
Wearability, wearproof and heat-shielding coverings for details of the gas path of the turbine, the compressor and the chamber of combustion of gas turbine engine
Barvinok V.A., Shitarev I.L., Bogdanovich V.I., Dokukina I.A., Karasev V.M.
Simulating of Roots compressor
Belov G.O., Ermilov M.A., Kryuchkov A.N.
Constructive actions for decreasing the acoustic pressure inside space-rocket products
Popov P.A., Sindyukov A.A.
Developing an electronic reference book on thermogasodynamic properties of rocket engine fuel combustion products taking into account non-ideal character of the working process
Silyutin M.V.
The analysis of real thermodynamic cycle of bypass engine with mixing
Medvedev V.V.
Design and research of characteristics of a pressure fluctuation damping device for electrocontact manometers
Gimadiev A.G., Gimadiev A.A., Ermochkin A.Z., Ilyuchin V.N.
Dynamic tests of probes for measurement of pulsations pressure at the raised average pressure
1 1., 1 1., 1 1., 1 1.
Step-by-step simulation of wear of working surfaces in roller bearings
Klebanov Y.M., Murashkin V.V., Brazhnikova A.M.
Development of hydraulic devices with elastic regulating elements
Berestovitsky E.G., Gladilin Y.F., Pyalov N.V.
Analysis of the influence of lubricant supply conditions on the pressure distribution in squeeze-film dampers
Novikov D.K., Shliandina N.S.
Pressure measurements in the pipelines with the help of combined high temperature pressure sensor
Limanova N.I., Yudin P.E., Limanov I.A.
About the probes for measuring pulsations of pressure in the flowing part gas turbine engines
Shorin V.P., Gimadiev A.G., Bystrov N.D., Ilinskij S.A.
3D investigation of heat exchange and hydrodynamics of high pressure turbine nozzle block platforms with different cooling schemes
Gorelov Y.G., Ananyev V.V., Zolotuhina D.A.
Pilot study of frequency characteristics of an acoustic probe for measuring pressure pulsations in the gas turbine engine inlet device
Ivanenko V.N., Alexandrova T.G., Dyagileva E.C., Gimadiyev A.G., Bystrov N.D.
Mathematical model for calculating pressure in a pulsating combustion chamber
Solodovnikov A.V., Odentsov D.A., Kravtsov E.V., Golubyatnik V.V., Shcheblykin D.A.
Specific features of pressure pulsation control in combustion chambers of land based gas turbine units
Skiba D.V., Maksimov D.A., Kashapov R.S., Kharisov T.S.
Calculation of lubricant flow in the slide bearing of the aviation engine reducer
Siluyanova M.V., Fertikov A.О.
Flow conditioning downstream a pressure collector
Kalaev V.A., Khorobrov S.V.
Research of current and power interchange of swirled fluid streams in a hydraulic heat gentrator
Belozertsev V.N.
Ways of improving burners of two-staged combustion chambers
Bantikov D.Y., Grechishnikov O.V., Rogalev V.V., Roslyakov A.D., Tsybizov Y.I.
Assessment of changes in the sound-proof ability of the rocket fairing with layers of sound-proof materials varying in thickness
Popov P.A.
Cycled pressure of the multilayered multispan packagrcorrugated package
Eskin I.D., Alkeev R.I., Ivashchenko V.I.
Influence of the direction of ultrasonic vibrations on the formation of residual stresses in thread pieces made of titanium alloys
Romashkina O.V., Karanaeva O.V.
Development of a small-sized acoustic probe for the measurement of pressure pulsations in the gasdynamic duct of gas turbine engines
Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A.
Elastic metal-plastic thrust bearings for combined hydraulic units of pumped storage hydroelectric power stations
Baiborodov Y.I.
Formation of film cooling on the turbine blade back and pressure side in the case of using V-shaped dimples
Lebedev V.V., Lebedev O.V., Remizov A.E.
Theoretical and experimental studies of a gas stamping device with a piston pressure multiplier
Botashev A.Y., Bayramukov R.A.
Application of Bubnov-Galerkin method to determine fixed vibrational loads of launch vehicle compartments
Popov P.A., Sindyukov A.A., Malykhina O.I.
Vortex cleaning of fuel tank pressurant gas
Biryuk V.V., Shimanov A.A., Onoprienko D.A., Smorodin A.V., Shepelev A.I.
Elimination of gas dynamic resonance modes of vibration loads of gas distribution station pipeline fitting
Shabanov K.U., Kryuchkov A.N., Ermilov M.A., Balyaba M.V.
Fluctuations of pressure in rail gas injection of engines with spark ignition
Shishkov V.A.
Analysis of contact stresses in drawing round products
Kargin V.R., Kargin B.V., Kolesnikova S.Y., Sergeev Y.A.
Full-scale tests of superloaded thrust bearings for hydraulicturbine generators of Sibir hydroelectric power stations of the new generation with unit power of 1 million kw
Baiborodov Y.I.
Choosing the aerodynamic configuration of a subsonic cruise missile
Kovalev M.A., Nikitin A.N.
Analysis of control programs and climb paths of the hypersonic first stage of an aerospace system
Balakin V.L., Krikunov M.M.
Characteristics of a fuel spray downstream the pressure atomizers under high pressure in the combustion chamber
Sviridenkov A.A., Tretyakov V.V.
Estimation of static strength of sections of the linear pipeline portion with a colony of corrosion fine cracks
Subbotin V.A., Scherbo I.V., Kholodkov S.A., Giorbelidze M.G.
Measurements of pulse pressures within the volume of a melt in terms of intense impulse interferences
Yusupov R.Y., Kostryukov E.E.
Computation of tip clearance effect on characteristic of low pressure compressor of engine RD-33
Abdelwahid M.B., Fedorov R.M., Fedechkin K.S.
Method of reducing design aerodynamic characteristics to the results of drain tests of a transport category aircraft model
Bondar Y.I.
Calculated study of tangential inclination of nozzle vanes influence on gas-dynamic efficiency of axial turbine stage
Baturin O.V., Matveev V.N.
Experimental research of staff LTRE with hypergolic propellant under impulse engaging conditions
Shustov S.A.
Impact of the turbulence modeling approach on the accuracy of the fan noise level prediction
Pyatunin K.R., Arkharova N.V.
Procedure of designing a pilot operated gas pressure regulator for launch vehicle fuel tanks
Gimadiev A.G., Sverbilov V.Y., Stadnik D.M.
Dependence of energy characteristics of Stirling gas refrigerating machines on external and internal parametric values
Belozertsev V.N.
Comparison of mathematical simulation results and experimental research of PVD-K3-1 air pressure probe
Moiseev V.N., Dubinina M.M., Pavlovsky A.A., Sorokin M.Y.
On the development of probes for measuring pressure pulsations in the gas-dynamic channel gas generator
Shorin V.P., Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A., Alexandrova T.G.
The equipment for research of properties of hydrocarbons at pressure from above 150 MPа
Rednikov S.N.
Cramped bending of sheet metal piece curved sides with an elastic medium
Barvinok V.A., Komarov A.D., Kulakov V.G., Moisseyev V.K., Sharov A.A.
Design of bimetallic impeller for gas turbine
Magerramova L.A.
Research of the wet condition in fuel tanks of high weight booster rockets during storage and aviation transportation periods
1 1., 1 1., 1 1.
Increasing efficiency of pressurization of the rocket tanks in the flight
Biryuk V.V., Kapitonov V.A., Smorodin A.V.
Test bench for investigation of thrusters intra-chamber working processes
Pervyshin A.N., Ryazanov A.I.
Analysis of schemes of correction of dynamic characteristics of acoustic probes for measuring pressure pulsations in a gas turbine engine
Gimadiev A.G., Bystrov N.D., Dyagileva E.S.
The fiber-optical multitouch pressure transducer
Leonovich G.I., Matjunin S.A., Livochkina N.A.
Dynamic of the a safety vent valve
Makaryjants M.V., Kudyurov L.V., Mustafaev Y.K., Tumanov D.V.
Shaping parts explosive processes on conditions exactly assembly aircraft components
Tlustenko S.F., Sitnik V.A.
Switched-reactance control of pressure and flow as a way to increase energy efficiency of hydraulic drives – a state-of the-art review
Sverbilov V.Y., Stadnik D.M., Iliukhin V.N., Shamin D.V.
Pressure pulsation dampener for air controller
Igolkin A.A., Safin A.I., Shakhmatov E.V.
Structure of arterial blood pressure monitors
Fedotov A.A., Akulov S.A., Akulova A.S.
Modeling thermal and thermomechanical effects in elements of microcircuits for the design of aircraft control airborne equipment
Fortinsky Y.K.
Dependence between microscopic characteristics of the material MR and parameters of press forming
1 1., 1 1.
Peculiarities of acoustic loading of the space vehicle in the nose fairing launched as part of a «Soyuz»-type rocket
Popov P.A., Sindyukov A.A., Kryuchkov A.N.
Development and research of a device for gas sheet stamping with a piston pressure multiplier
Botashev A.Y., Bayramukov R.A.
Review of research conductivity of dielectrics and semiconductors under high pressure
Telegin A.M., Kalaev M.P., Semkin N.D.
Numerical simulation of tonal noise of a bypass engine fan stage
Pyatunin K.R., Arharova N.V., Remizov A.E.
Stabilization of a pilot-operated gas pressure control valve by placing a throttle at the inlet
Stadnik D.M., Sverbilov V.Y., Makaryants G.M., Makaryants M.V.
Development of discrete pneumatic pressure regulator and researching of its characteristics
Greshniakov P.I., Sinyakov A.F., Ilukhin V.N.
Calculating sound insulation of a sandwich structure on the basis of the «inverse matrix» method
Popov P.A., Osipov A.S., Sindyukov A.A.
Analysis of the effect of technological parameters of rolling on the optimization of rolling milladjustment programs
Tlustenko S.F.
The efficiency of aligning gratings at engine inlet of ground power plants
,
Characteristics of the sampling instrument for measuring emissions of an aircraft gas turbine engine
Okhlobystin A.V., Lyubimov R.V., Sokolova N.N.
To a question of forcing up of thermal stirlings macine
Belozertcev V.N.
Biological module “BiNOM” for cubesats of the SamSat family
Zakharov V.P., Konyukhov V.N., Bakhtinov P.I., Molchkov E.V., Kornilin D.V., Konovalov S.G.
Influence of tension and contact stress on sliding in cylindrical roller bearings in support of gas turbine engines
Belomytcev O.M., Pischalnikov A.B.
Mathematical model of investigating normal acoustic modes of launch vehicle modules
Popov P.A., Belov A.S., Kryuchkov A.N.
Choosing the optimal method of the centrifugal loads modeling using 2D FE models of the compressor’s disks slots
Balyaeva N.N., Guschin A.Y.
The influence of a combined pump’s auger-centrifugal stage inlet design on its vibration and pulsation states
Gafurov S.A., Rodionov L.V., Kryuchkov A.N., Makaryants G.M., Shakhmatov Y.V.
Calculation of hydrodynamic noise in the diffuser of a pulsation damper flow channel
Makaryants G.M., Gafurov S.A., Zubrilin I.A., Kryuchkov A.N., Shakhmatov Y.V., Berestovitsky E.G., Gladilin Y.A.
Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine
1 1., 1 1.
Increasing efficiency of pressurization of the rocket tanks in the flight
1 1., 1 1.
System of pressurization of the fuel tank of a launch vehicle using the heat of generator gas
Biryuk V.V., Smorodin A.V., Shepelev A.I., Onoprienko D.A.
Development of a pulsation dampener for hydraulic systems of power plants
Kryuchkov A.N., Еrmilov M.A., Еrmilova E.N., Balakhonov I.V., Vidyaskina A.N.
Relation between flame chemiionization and variable-volume combustion chamber temperature and pressure
Shaikin A.P., Galiev I.R.
Fiber-optical pressure transducer for the UA engine control system
Leonovich G.I., Matyunin S.A., Glushkov A.I., Livochkina N.A., Solovyov V.I.
Development of methods of modeling and computer-aided design of compressors
Krivosheev I.A., Rozhkov K.E.
Life testing of pipeline elements
Boltenkova O.M., Davydov O.Y., Yegorov V.G.
Designing of the aviation engine's hydrodynamic bearing
Parovay Y.F., Gordeev V.B., Falaleev S.V.
Pressure pulsation dampers as a means of improving the inherent vibroacoustic charateristics of hydraulic test rigs
Berestovitsky E.G., Gladilin Y.A., Kryuchkov A.N., Fyodorov A.Y., Frantov A.A., Shakhmatov Y.V.
Modeling static and dynamic characteristics of pressure reducing valves
Igolkin A.A.
Physical principles of hydrodynamic non-stationarity effect on turbulent flow
Krayev V.M., Tikhonov A.I.
Theoretical definition of temperature fields at thermoplastic hardening of details of gas turbine engines
Barvinok V.A., Vishnyakov M.A., Ignatiev S.A.
1 - 92 of 92 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies