Elimination of gas dynamic resonance modes of vibration loads of gas distribution station pipeline fitting
- Authors: Shabanov K.U.1, Kryuchkov A.N.2, Ermilov M.A.2, Balyaba M.V.3
-
Affiliations:
- Gazprom Transgas Samara plc
- Samara State Aerospace University
- Machine Acoustics Institute, Samara State Aerospace University
- Issue: Vol 13, No 4 (2014)
- Pages: 107-118
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/2426
- DOI: https://doi.org/10.18287/1998-6629-2014-0-4(46)-107-118
- ID: 2426
Cite item
Full Text
Abstract
The article contains a study of the modes of resonance interaction of a high-speed gas flow exiting from the metering sections of pressure regulators with their elements. It is shown that the interaction leads to a significant increase of the valve noise due to the tone component of the spectrum of vibration energy which occurs at the frequency characteristics of pressure fluctuations in the pipeline, the vibration of the controller output flange, as well as the external valve noise. The results of analyzing the prerequisites for resonant interaction of the gas flow with the regulator structural elements including the pylons of the central fairing are presented in the paper. It is shown that an increase in the output flow rate above a certain value (about 40 m / s) gives rise to discrete components of the spectrum of pressure fluctuations. The results of experimental analysis of the pressure regulator elements showing practical coincidence of the frequencies of discrete components of the flow pulsation spectrum and free oscillations of construction elements are also presented. Modal analysis of the natural oscillations of regulator elements is performed by tapping. Measures to remove resonant interaction of the output flow with the pylons that consist in installing special flow-splitting structures - perforated cylindrical sleeves are proposed. Other measures to eliminate the resonant interaction under consideration are also possible.
About the authors
K. U. Shabanov
Gazprom Transgas Samara plc
Author for correspondence.
Email: K.Shabanov@samaratransgaz.gazprom.ru
Chief Technical Officer
Russian FederationA. N. Kryuchkov
Samara State Aerospace University
Email: kan@ssau.ru
Doctor of Science (Engineering)
Professor, Department of Automatic Systems of Power Plants
Russian FederationM. A. Ermilov
Samara State Aerospace University
Email: emasamara@gmail.com
Postgraduate student, Department of Automatic Systems of Power Plants
Russian FederationM. V. Balyaba
Machine Acoustics Institute, Samara State Aerospace University
Email: bmw-surgut@yandex.ru
Engineer
Russian FederationReferences
- Arzumanov E.S. Gidravlicheskie reguliruyushie organy system avtomaticheskogo upravleniya [Hydraulic regulating elements of automatic control systems]. Moscow: Mashinostroeniye Publ., 1985. 256 p.
- Udin E.Ya. Borba s shumom na proizvodstve [Noise control in manufacture]. Moscow: Mashinostroeniye Publ., 1985. 400 p.
- Joffe V.K., Korol'kov V.G., Sapozhkov M.A. Spravochnik po akustike [Reference book on acoustics]. Moscow: Svyaz' Publ., 1979. 312 p.
- ANSI/ISA-75.17-1989 Control Valve Aerodynamic Noise Prediction, ISBN 1-55617-207-9. 1989. 32 p.
- Shorin V.P. Razrabotka metodov fizicheskogo modelirovaniya glushiteley shuma sverhzvukovyh pulsirujushih struy [Development of methods of physical modeling of supersonic pulse jet noise dampers]. Samara: Samara St. Aerosp. Univ. Publ., 2008. 72 p.