Dependence of energy characteristics of Stirling gas refrigerating machines on external and internal parametric values


The question of forcing the heat engines Stirling is important. The increase of cold-productivity of the refrigeration machine is carried out by means of change of pressure filling and Internal parametric values of refrigerating machines: filling pressure, relative temperature, relative dead volume, the ratio of the maximum described volumes working cavities and external: frequency of rotation effects on the energy characteristics of machines. The article presents the assessment of the impact of these parametric values on the real characteristics of refrigerating machines and identify opportunities and ways of forcing speed of the drive. To work with minimum total power losses and maximum cooling capacity of the filling pressure and speed must not be changed arbitrarily. The relationship between them via the same minimum total losses in the regenerator.

About the authors

V. N. Belozertsev

Samara State Aerospace University

Author for correspondence.

Candidate of Science (Engineering)

Associate Professor of heating engineering and thermal engines department

Russian Federation


  1. Novotelnov V.N., Suslov A.D., Poltaraus V.B. Kriogennye mashiny [Cryogenic units]. Saint-Petersburg: Politechnika Publ., 1991. 332 p.
  2. Walker G. Mashiny, rabotajushhie po ciklu Stirlinga [The units working on a Stirling cycle]. Moscow: Energia Publ, 1978. 145 p.
  3. Grezin A.K., Zinovev V.S. Mikrokriogennaja tehnika [The microcryogenic technics]. Мoscow: Mashinostroenie Publ., 1977. 232 p.



Abstract: 3433

PDF (Russian): 1683




  • There are currently no refbacks.

Copyright (c) 2015 VESTNIK of the Samara State Aerospace University

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies