Search

Issue
Title
Authors
Modeling of stall cavitation sensitivity of a booster turbopump assembly and comparison between experimental and numerical results
Kazyonnov I.S., Kanalin U.I., Poletaev N.P., Chernisheva I.A.
Analysis of models of fuel elements while using of surface mountng
Knyazeva G.N., Krasnoshchekova G.F., Tyulevin S.V.
Parameters study in the electrothermal and jet protection of the airliner cockpit windows from fogging
Nikolayev V.N.
A model of monitoring the demand function in the context of a polipoly with the "ASK-RENTGEN" enterprise taken as an example
Bogatyrev V.D., Levitan V.G.
Methodology systems approach in models of technological subassembly in the aircraft industry
Barvinok V.A., Tlustenko S.F.
The development of mathematical models of acoustic characteristics of the elastic porous material «metal-rubber»
Safin A.I., Igolkin A.A.
Mathematical model and peculiarities of operating mobile robots with hybrid drives
Ilyukhin Y.V., Tatarintseva A.V.
Simulation and research of factors affecting aerodynamic indices of the gas purification process
Usmanova R.R., Zhernakov V.S.
Analysis of the terminological status of the «overall cost» concept (methodological aspect)
Sosnina T.N.
Questions of economic justification converting aviation engines for use in compressor stations of unified gas supply system
Vorobyov M.Y.
Using active noise suppression non-adaptive systems with a transfer function model for the reduction of medical equipment noise
Sementsov S.G.
The development of mathematical model of hydrodynamics of "tpapped" volume in the gear pump
1 1., 1 1., 1 1., 1 1., 1 1.
Investigation of extreme opportunities of stand supporting systems
Samsonov V.N., Kozyreva M.S., Cherevan A.A.
Method of improving control using a simulation object model and its application to the problem of helicopter emergency landing manoeuvre optimization
Kvokov V.N., Trushkova Y.A., Ukhin M.Y.
Model of varigrained particle stream moving by hypersonic combustion materials investigation
Bulanova E.A., Pervishin A.N.
Identification of a gas turbine engine mathematical model by the ressults of testing
Botchkaryov S.K., Dmitriyev A.Y.
Optimal design of an induction heater of minimum length
Mednikova V.A.
Verification of a design model and evaluation of a technique of manufacturing aircraft engine composite parts on the basis of dynamic tests
Zinin A.V., Arkhipov A.N., Kholobtsev D.P., Ravikovich Y.A., Shevjakov A.O., Kholmanova M.A.
Design build process for the accuracy of eligibility
Grechnikov F.V., Tlustenko S.F.
3D-model of compressor rotor blade development
Boyarov K.V., Ryazanov A.I., Chempinsky L.A.
Sales training methods based on through the use of CAD / CAM / CAE systems for aero engines
Balyakin A.V., Ermakov A.I., Pronichev N.D., Chempinsky L.A.
Process of coating the inner surface of an inclined pipe and its mathematical modeling
Skvortsov B.V., Zaretskaya M.I., Zaretskiy I.S., Zhivonosnovskiy P.A.
Estimation of functional efficiency of the air transport service system at a regional airport terminal
Koltsov I.V., Romanenko V.A.
Mathematical models of squeeze film dampers in rotor dynamics of gas turbine engines
Kutakov M.N., Degtiarev S.A., Leontiev M.K.
Spacecraft power supply system using additional low-power sources of energy
Kargu D.L., Beznyakov A.M., Nemirov A.V.
Analysis of the effectiveness of predictive models of quality parameters of the chips
Tyulevin S.V., Arhipov A.I., Piganov M.N., Elizarov S.V.
Modeling of propane combustion processes in case of converting a GTE combustion chamber to gaseous fuel
Matveev S.G., Lanskiy A.M., Orlov M.Y., Abrashkin V.Y., Dmitriev D.N., Zubrilin I.A., Semenov A.V.
Functional components of the model of pedagogical activity of a distance learning teacher
Belousov A.I., Gromova T.V.
Development of the technology of diagnostics of turbo-jet aviation engines by a filtering element with a diagnostic layer
Drokov V.V., Drokov V.G., Muryshenko V.V., Mukhutdinov F.I., Khaliullin V.F.
Validation of CFD-models of gas turbine engine uncooled turbines
Matveev V.N., Popov G.M., Goryachkin E.S., Smirnova Y.D.
Method of production testing of electronic parts
Nasedkin A.V., Tyulevin S.V., Piganov M.N.
Analysis of the cause of serious flight accident
Vakhrushev D.E., Agaphonov O.A., Pryadko S.P., Schukin A.V.
Stabilization of a pilot-operated gas pressure control valve by placing a throttle at the inlet
Stadnik D.M., Sverbilov V.Y., Makaryants G.M., Makaryants M.V.
Improving the high pressure compressor efficiency by optimizing the stator blades angles
Popov G.M.
Additive technology application details of combustion
Balyakin A.V., Smelov V.G., Chempinskiy L.A.
Simulator, algorithm and software for the computation of differential gas circuits frequency response
Igonin A.A., Gimadiev A.G.
Calculation of hydrodynamic noise in the diffuser of a pulsation damper flow channel
Makaryants G.M., Gafurov S.A., Zubrilin I.A., Kryuchkov A.N., Shakhmatov Y.V., Berestovitsky E.G., Gladilin Y.A.
Approach to the assessment and forecasting for onboard computer systems of monitoring space vechiles during its usage based on full-scale experiments
1 1., 1 1., 1 1.
Hemispherical high-speed particle transducer
Izyumov M.V., Syomkin N.D.
Experimental acknowledgement of adequacy of the developed mathematical model of instant giving of the liquid by the gear pump
1 1., 1 1., 1 1., 1 1., 1 1.
Working out the system of technical decisions for ensuring the reliability of friction units of gas-turbine engines
Gromakovsky D.G., Kovshov A.G., Ibatullin I.D.
Laser optico-acoustical octane meter in systems of optimizing the process of commercial petrol compound-filling
Astapov V.N.
Development of the information technology for estimation of fundus image geometric parameters
Kuprijanov A.V., Ilyasova N.Y.
Experimental and design analysis of models of cyclic compression for a multilayer multispan package of corrugated sheets
Eskin I.D., Alkeev R.I., Ivashchenko V.I.
Correlation and regression model for the assessment of circular non-uniformity of the gas temperature field at the outlet of small gas turbine engine combustion chambers
Lukachev S.V., Abrashkin V.Y., Lansky A.M., Matveev S.G.
Mathematical model for calculating pressure in a pulsating combustion chamber
Solodovnikov A.V., Odentsov D.A., Kravtsov E.V., Golubyatnik V.V., Shcheblykin D.A.
Improving the efficiency of aviation turbofan engines by using an intercooler and a recuperative heat exchanger
Omar H., Kuz'michev V.S., Tkachenko A.Y.
Use of probability distribution mixes in airport simulation model
Romanenko V.A.
Investigation of resonant oscillations working plates in experimental models of pneumatic valve
Zhuravliov О.A., Komarov S.Y., Makaryants G.M., Sergeev R.N., Harchikova J.V.
Modeling of heat conduction process in porous MR material
Zhizhkin A.M.
Development of methods for ensuring energy balance for the operation of mission equipment of “AIST”-series small satellites under conditions of power limitations
Ivanushkin M.A., Salmin V.V., Tkachenko S.I., Tkachenko I.S., Volgin S.S.
Peculiarities of using additional low-power energy sources in the power supply system of small spacecraft
Kargu D.L., Beznyakov A.M., Nemirov A.V., Radionov N.V., Chudnovsky Y.A.
Prospective lines of improving the process of evaluating the technical condition of aircraft hydraulic system working fluid
Koptev A.N., Gareyev A.M., Popelnyuk I.A.
Using apriori information in interferometric processing of high resolution sar data
Ushenkin V.A., Egoshkin N.A.
Method of accelerated test research soldered joints surface mount devices
Nasedkin A.V.
Simulation of wire manufacturing production cycle
Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.
Using an ionization probe removed from the sparking plug for the development of a two-zone ICE combustion model
Ivashin P.V., Rybakov M.P.
Functional chart of a multichannel hydrologic-optical-chemical measuring complex and new measuring channels of hydrophysical parameters
Smirnov G.V., Olenin A.L.
Dynamic of the a safety vent valve
Makaryjants M.V., Kudyurov L.V., Mustafaev Y.K., Tumanov D.V.
The influence of the shuttle effect on the intensification of heat losses in a Stirling engine
Savchenko V.A., Stolyarov S.P.
Optimization of model positional harakterstik of the electromagnetic sensor of the linear peremeshchny
Tingaev V.S., Matyunin S.A., Mednikov V.A.
Information support of aviation embedded information and control systems lifecycle
Akimova T.E.
Automated construction of a 3D plane model at the stage of technical proposals
Borgest N.M., Aleev R.H., Aksanian P.A., Gromov A.A.
Test of kinematic model by pneumatic manipulator
Gribkov A.M., Shilin D.V., Filin I.P.
Calculation methodology of intermittent burning chamber main parameters
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Mathematical modeling of heat exchange on air cooling of a number of aluminum ingots
Gorshenin A.S.
Optimization of aircraft seven stage compressor first stages parameters
Popov G.M., Matveev V.N., Baturin O.V., Kolmakova D.A.
Modeling static and dynamic characteristics of pressure reducing valves
Igolkin A.A.
Calculating the parameters of eddy current converters when testing several samples of cylindrical shape
Gainullina G.M., Polulekh A.V.
Methods of measurement and calculation of microaccelerations onboard of low orbit space microgravitational platform
1 1., 1 1., 1 1.
Plane high-speed particle transducer
Izyumov M.V., Syomkin N.D.
The simplification of heat engines thermodynamics calculation with using of idaeal gas’ model
1 1., 1 1.
Formation of a structural calculated mesh the passage blade of the axial turbine in program GAMBIT
Baturin N.V., Baturin O.V., Matveev V.N.
Simulation of automatic systems of controlling space vehicle drives
Zhuravlyova Y.V.
Methods and models of autonomous control over Earth remote sensing spacecraft survivability
Akhmetov R.N.
Mathematical modeling of dynamic processes in a hydraulic drive with a discrete regulator of liquid flow
Shakhmatov Y.V., Gimadiev A.G., Sverbilov V.Y., Sinyakov A.F.
Study of the mechanism of flame stabilization in aaluminum-air mixture
Egorov A.G., Tizilov A.S.
201 - 277 of 277 Items << < 1 2 3 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies