Search

Project of 30 000 h.p. power gas turbine

Zrelov V.A.

(Rus)

Vol 22, No 4 (2023)

JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines

Vinogradov K.A., Nikulin A.S., Shmotin Y.N.

(Rus)

Vol 21, No 2 (2022)

Influence of pad geometry and method of oil supply on the thermal state of GTE rotor tilting-pad journal bearing

Parovay E.F.

(Rus)

Vol 20, No 4 (2021)

Special aspects of numerical simulation of a two-stage axial-flow compressor with defective blades

Blinov V.L., Zubkov I.S., Iskortsev E.Y., Belyaev O.V., Plishkin P.I.

(Rus)

Structure and physico-mechanical properties of heat resistant gazoplazmennyh coating NiCrCoAlY/ZrO2 for turbine blades of gas turbine engines

Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fehl Y.A.

(Rus)

Development of elements and parameters of LNG fuel system with cryogenic piston pump and gas receiver for road gas turbine locomotive

Bukin V.A., Rudenko V.F.

(Rus)

Vol 15, No 4 (2016)

Peculiarities of computer modeling of the working process in small gas turbine engines

Kuz'michev V.S., Tkachenko A.Y., Ostapyuk Y.A.

(Rus)

Vol 14, No 3 (2014)

Application of thermoplastic hardening for restoration of fatigue durability of gas turbine disks

Vishnyakov M.A.

(Rus)

Vol 17, No 1 (2018)

Methods of evaluating low-cycle fatigue of gas turbine engine parts exemplified by a high-pressure turbine cover plate

Kocherova E.E.

(Rus)

Vol 16, No 1 (2017)

Improvement of gas turbine engines due to isothermal expansion in the turbine

Muraeva M.A., Gorjunov I.M.

(Rus)

Vol 17, No 3 (2018)

Evaluation of turbine rotor blade life taking into account static and thermal cyclic loading

Badamshin I.K.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Design of the gas turbine engine rotor wheel with ceramic blades

Sapronov D.V., Reznik S.V.

(Rus)

Off-line long-life unservice close gas organic fuel-powered turbine

Arbekov A.N.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Validation of CFD-models of gas turbine engine uncooled turbines

Matveev V.N., Popov G.M., Goryachkin E.S., Smirnova Y.D.

(Rus)

Vol 10, No 2 (2011)

Design of bimetallic impeller for gas turbine

Magerramova L.A.

(Rus)

Vol 10, No 5 (2011)

Vortex gas wind-driven power plant for supplying compressor stations with electrical energy

Biryuk V.V., Zubrilin I.A., Krasnorutskiy A.S.

(Rus)

Optimization features of the working process parameters of bypass engine on the basis of given gas generator

Rybakov V.N.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Problem formulation of bypass engine parameters optimization with a preselected gas generator

Kuzmichev V.S., Kulagin V.V., Tkachenko A.Y., Krupenich I.N., Rybakov V.N.

(Rus)

Vol 9, No 1 (2010)

Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine

1 1., 1 1.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Evaluating the possibility of using low-temperature thermal energy in liquefied natural gas complexes

Dovgjallo A.I., Sarmin D.V., Uglanov D.A., Shimanov A.A.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Conditions of compatibility of compressor and turbine used as part of a gas generator required to ensure turbine operability

Grigoriev A.V., Ilyushin M.Y., Mitrofanov V.A., Rassokhin V.A., Rudakov O.A., Solovieva A.V.

(Rus)

The task of creating the bypass engines of various thrust levels using the given gas generator

Kocherov E.P., Kuzmichev V.S., Kulagin V.V., Fedorchenko D.G.

(Rus)

On selection of automatic control system for crvogenic fuel gas turbine engine

Bukin V.A.

(Rus)

Comparative analysis of facilities for the implementation of thermoplastic hardening blades of gas turbine engines and pumping units

Karpov A.V.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a full-size gas turbine combustor and its one-burner sector

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a one-burner sector of a gas turbine combustor with uncertain initial conditions of fuel atomization

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Bases of methodology of maintenance of system safe operation of engines at all stages of life cycle

Grigoriev V.A., Kuznetsov S.P.

(Rus)

Gas turbine engine designing on the basis of a unified gas generator

Rybakov V.N.

(Rus)

Vol 20, No 3 (2021)

Application of the vacuum casting technology in the production of small-size gas turbine engine blade machines

Faramazyan A.M., Remchukov S.S., Demidyuk I.V.

(Rus)

Vol 19, No 2 (2020)

Technology of low-emission fuel combustion and conceptual structure of the combustion chamber of a gas-turbine power plant

Tsybizov Y.I., Tyulkin D.D., Vorotyntsev I.E.

(Rus)

Vol 18, No 1 (2019)

Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber

Matveev S.G.

(Rus)

Vol 17, No 4 (2018)

Automated construction of a fan blade model according to data of CAD profile measurements

Arkhipov A.N., Bugrjashova E.V., Ravikovich Y.A., Savin R.A., Terentjev V.V., Shevjakov A.O.

(Rus)

Vol 17, No 2 (2018)

Improvement of friction units of power plants by aplying ceramic composite spray coatings

Siluyanova M.V., Fertikov A.O.

(Rus)

Vol 16, No 2 (2017)

Micro gas turbine engine imitation model

Kuznetsov A.V., Makaryants G.M.

(Rus)

Vol 14, No 4 (2015)

Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber

Kocherova Е.Е.

(Rus)

Selection of optimal configuration and workflow parameters of autonomous micro gas turbine plant

Baturin O.V., Smirnova Y.D.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Studying the influence of the gas-dynamic non-stationary factors on the mathematical modelling of the gas turbine engines nonsetup work modes

Kofman V.M.

(Rus)

Vol 10, No 2 (2011)

Construction of a blade beam finite element as a component of the blade disk rotary-symmetrical system

Davydov D.P.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

The calculated study of fluid structure in a hub an axial aviation turbine

1 1., 1 1.

(Rus)

Working out the system of technical decisions for ensuring the reliability of friction units of gas-turbine engines

Gromakovsky D.G., Kovshov A.G., Ibatullin I.D.

(Rus)

Vol 8, No 1 (2009)

Problems of making auxiliary gas turbine engines with gas bearing rotors

Ponomaryov B.A., Gavrilov V.V.

(Rus)

On the issue of research of the properties of the heat-resistant nickel single-crystal superalloys

Tikhomirova E.A., Zhivushkin A.A., Getsov L.B., Rybnikov A.I.

(Rus)

Vol 18, No 1 (2019)

Application of additive technology of selective laser melting (SLM) in designing a low emission combustion chamber of a gas turbine plant

Yeliseev Y.S., Fedorchenko D.G., Golanov S.P., Tsibisov Y.I., Tyulkin D.D., Vorotyntsev I.E., Ivchenko A.V.

(Rus)

Vol 17, No 3 (2018)

Development of a procedure for the synthesis of a micro gas turbine engine neural controller with account for fuel consumption constraints

Kuznetsov A.V., Makaryants G.M.

(Rus)

Vol 17, No 1 (2018)

Optimization of ducted counter–rotating fan blades on the basis of solving a 3d inverse problem with the aim of improving fan gasdynamic characteristics

Mileshin V.I., Pankov S.V., Fateyev V.A., Shchipin S.K.

(Rus)

Vol 16, No 1 (2017)

Evaluation of low cycle fatigue based on the use of Coffin-Manson dependence under zero-to-“soft” loading cycle

Pavlov V.F., Kirpichyov V.A., Kocherova E.E., Zlobin A.S.

(Rus)

Vol 15, No 4 (2016)

Using the «virtual engine» software in automatic control system of gas turbine engine

Golberg F.D., Gurevich O.S., Petukhov A.A.

(Rus)

Development and analysis of screw restrictor hydraulic characteristics in the air bleed valve control unit of a gas turbine engine

Gimadiev A.G., Makaryants G.M., Blyumin K.V., Dudnichenko I.M.

(Rus)

Vol 14, No 3-1 (2015): Special Issue

Modification of the starter turbine disk for blade containment certification tests

Karimbaev K.D., Sapronov D.V.

(Rus)

Vol 14, No 2 (2015)

Experience of operational development of starting characteristics of the APU combustion chamber

Chechulin A.Y.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Computer-aided system of virtual gas turbine engine testing

Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Ostapuk Y.A., Filinov E.P.

(Rus)

Fulfilment of initial design level of gas turbine engine using the methods of «ASTRA» CAE system

Kuzmichev V.S., Krupenich I.N., Tkachenko A.Y.

(Rus)

A technique to estimate efficiency of turbine underplatform friction dampers

Nikhamkin M.S., Sazhenkov N.A.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Methods and means of aircraft gas turbine engine conceptual design underlying the CAE system «ASTRA»

Kuzmichev V.S., Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Kulagin V.V.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Rotor in gas bearings dynamics experiment-calculated investigation

Temis Y.M., Temis M.Y., Egorov A.M., Gavrilov V.V., Ogorodov V.N.

(Rus)

Seal designing in a structure of the cooling system in gas turbine engine

Vinogradov A.S., Myatlev A.S.

(Rus)

Vol 21, No 3 (2022)

Aspects of simulating stable low-cycle fatigue crack growth in the main parts of aircraft gas turbine engines

Ryabov A.A., Mokhov K.Y., Voronkov O.V., Kudryavtsev A.Y., Museev A.A.

(Rus)

Vol 19, No 2 (2020)

Gas turbine engine dynamic model based on variable-memory LSTM architecture

Kuznetsov A.V., Makaryants G.M.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Numerical study of possibility of reliable diagnostics of gas turbine engine by gasdynamic parameters using a linear mathematical model

Gerasimov A.B., Sundukov M.Y.

(Rus)

Testing of gas turbine engine bearing oil supply through an oil-catch ring

Boev A.A., Petrukhin A.G., Mikhailov A.A.

(Rus)

Vol 10, No 5 (2011)

Research of toxic substances emission during water injection into a combustion chamber

Mingazov B.G., Mukhametgaliev T.H.

(Rus)

Vol 14, No 2 (2015)

Identifying the causes of excessive vibration in gas turbine engines in the course of their rig tests

Sundukov A.Y., Sundukov Y.V., Plotnikov S.M.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Research of gas turbine engine operation in dust-filled atmosphere

Abdullin B.R., Akmaletdinov R.G., Goumerov K.S., Nigmatullin R.R.

(Rus)

Causes of failures of rolling bearings

Zvonarev S.L., Zubko A.I.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Approaches to modeling work of gas turbine engine`s core as a connected task

Krivcov A.V., Shabliy L.S., Baturin O.V.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Optimization characteristics of rotor-support system from NK-14ST free power turbine with consider statics and dynamics propertys

1 1., 1 1.

(Rus)

The oretical substantiation of the constructive scheme of the air-gas tract rinsing device for GTE

Silaev B.M., Mal’tsev E.N.

(Rus)

Vol 20, No 2 (2021)

Calculation of flow characteristics of liquid fuel supplied through pressure jet atomizers of small-sized gas turbine engines

Gurakov N.I., Zubrilin I.A., Hernandez Morales M., Yakushkin D.V., Didenko A.A., Matveev S.G., Komisar Y.V.

(Rus)

Vol 18, No 4 (2019)

Improvement of fretting wear resistance of blade root made of polymer composite material

Karimbayev T.D., Afanasiev D.V., Matyukhin D.V., Orlov M.A.

(Rus)

Vol 10, No 3-4 (2011): Special Issue

Gas turbine engine rotor bearings electrical current damage on the base of NK-family engines for electrical generator drive

Nazdrachev S.V.

(Rus)

Vol 16, No 4 (2017)

Development of a new collector device for gas turbine engine afterburner

Teslya D.N., Mayatsky S.A., Grasko T.V.

(Rus)

Vol 15, No 3 (2016)

The influence of booster design features on aicraft engine fan tonal noise

Khaletskiy Y.D., Korzhnev V.N., Pochkin Y.S.

(Rus)

Conversion of gas turbine engine oil system

Boev A.A., Grishanov O.A.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Experimental investigation of a small-sized centrifugal compressor for a closed-brayton cycle gas turbine power system

Arbekov A.N., Novitskiy B.B.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Thermoplastic strengsening of blades aircraft gas turbine engines

Krotinov N.B.

(Rus)

Development of a virtual prototype of gasturbine engine at the stage of conceptual thermogasdynamic designusing the CAE-system «ASTRA»

Tkachenko A.Y., Krupenich I.N.

(Rus)

Gas turbine engine simulation strategy in CAE systems

Krivcov A.V.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

A separator skidding in the cylindrical roller bearing between shafts of the gas turbine engine

1 1., 1 1., 1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Features of designing gas turbine of complex cycle GT24

1 1.

(Rus)

Vol 20, No 1 (2021)

Mathematical model of turbofan engine weight estimation taking into account the engine configuration and size

Avdeev S.V.

(Rus)

Vol 18, No 3 (2019)

Design of experiments for verification of computational life prediction methods

Samsonova O.V., Fetisov K.V., Karpman I.V., Burtseva I.V.

(Rus)

Experiment-calculated research of the influence of the shot-peening strengthening upon the low-cycle fatigue of the gas turbine parts with the stress concentrator

Porter A.M., Bukaty S.A., Leshin D.P., Bukaty A.S.

(Rus)

Vol 18, No 1 (2019)

Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 17, No 3 (2018)

Analysis of schemes of correction of dynamic characteristics of acoustic probes for measuring pressure pulsations in a gas turbine engine

Gimadiev A.G., Bystrov N.D., Dyagileva E.S.

(Rus)

Vol 15, No 4 (2016)

Morphological characteristics of the intermetallic phase of heat resisting nickel alloys

Kirikov S.V., Perevezentsev V.N., Tarasenko Y.P.

(Rus)

Vol 15, No 3 (2016)

Laser powder weld reconditioning of gas turbine engine blades

Korsmik R.S., Turichin G.A., Klimova-Korsmik O.G., Zemlyakov E.V., Babkin K.D.

(Rus)

Application of numerical simulation systems for the research of the blade casting process in blank production

Smelov V.G., Vdovin R.A., Agapovichev A.V.

(Rus)

Vol 10, No 5 (2011)

Simulation of aerodynamic structure of the flow in the combustion chamber of a small-size gas turbine engine with the help of CAE–systems

Matveev S.G., Orlov M.Y., Abrashkin V.Y., Zubrilin I.A., Matveev S.S.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Development of a prototype of a multi-loop closedbrayton cycle gas turbine power system

Arbekov A.N., Novitskiy B.B.

(Rus)

Working conditions analysis of rotor supports bearings in aviation gas turbine engines and energetic units structure

Zrelov V.A., Makarchuk V.V., Prodanov M.E., Sudarev A.A.

(Rus)