Search

Development of elements and parameters of LNG fuel system with cryogenic piston pump and gas receiver for road gas turbine locomotive

Bukin V.A., Rudenko V.F.

(Rus)

Vol 10, No 1 (2011)

Using the energy of gas differential pressure in electromagnetic injectors for improved breathing of spark-ignition internal combustion engine cylinders

Shishkov V.A.

(Rus)

Vol 22, No 4 (2023)

JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines

Vinogradov K.A., Nikulin A.S., Shmotin Y.N.

(Rus)

Vol 21, No 2 (2022)

Validation of the “stage – diffuser” system numerical study and its use for design modernization

Cherkasova M.G., Semakina E.Y., Chernikov V.A.

(Rus)

Comparative analysis of facilities for the implementation of thermoplastic hardening blades of gas turbine engines and pumping units

Karpov A.V.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a full-size gas turbine combustor and its one-burner sector

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Vol 21, No 2 (2022)

Influence of pad geometry and method of oil supply on the thermal state of GTE rotor tilting-pad journal bearing

Parovay E.F.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Joint work of units and characteristics of elements gas the equipment for the engine of internal combustion with spark ignition

Shishkov V.A., Lesnih U.I.

(Rus)

Vol 16, No 4 (2017)

Application of open-source software for industrial problems of vehicle lift-off gas dynamics

Abdurashidov T.O., Osipov A.V., Korchagova V.N., Kraposhin M.V., Smirnova Y.V., Strizhak S.V.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a one-burner sector of a gas turbine combustor with uncertain initial conditions of fuel atomization

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Vol 21, No 1 (2022)

Gasdynamic and strength improvement of the axial flow turbine of a helicopter gas turbine engine

Goriachkin E.S., Popov G.M., Matveev V.N., Shcherban A.I., Kudryashov I.A., Melnikov S.A.

(Rus)

Bases of methodology of maintenance of system safe operation of engines at all stages of life cycle

Grigoriev V.A., Kuznetsov S.P.

(Rus)

Shock wave profiles in relaxing gas with external energy source

Anchikov D.A., Galimov R.N., Zavershinskii D.I., Makaryan V.G., Molevich N.E.

(Rus)

Vol 13, No 1 (2014)

Research of the mechanism of shock-inertial deposition of dispersed particles from a gas flow

Usmanova R.R., Zhernakov V.S.

(Rus)

Vol 20, No 4 (2021)

Special aspects of numerical simulation of a two-stage axial-flow compressor with defective blades

Blinov V.L., Zubkov I.S., Iskortsev E.Y., Belyaev O.V., Plishkin P.I.

(Rus)

Structure and physico-mechanical properties of heat resistant gazoplazmennyh coating NiCrCoAlY/ZrO2 for turbine blades of gas turbine engines

Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fehl Y.A.

(Rus)

Gas turbine engine designing on the basis of a unified gas generator

Rybakov V.N.

(Rus)

Vol 23, No 1 (2024)

Development of a mathematical model of the internal structure of a granular heat accumulator for launching a mono-fuel gas generator

Zrelov V.A., Lykin A.Y.

(Rus)

Vol 21, No 4 (2022)

Series of diagnostic indicators of gearbox teeth wear in aircraft gas turbine engines

Sundukov A.Y., Shakhmatov Y.V.

(Rus)

Vol 10, No 5 (2011)

Vortex gas wind-driven power plant for supplying compressor stations with electrical energy

Biryuk V.V., Zubrilin I.A., Krasnorutskiy A.S.

(Rus)

Optimization features of the working process parameters of bypass engine on the basis of given gas generator

Rybakov V.N.

(Rus)

Fluctuations of pressure in rail gas injection of engines with spark ignition

Shishkov V.A.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Problem formulation of bypass engine parameters optimization with a preselected gas generator

Kuzmichev V.S., Kulagin V.V., Tkachenko A.Y., Krupenich I.N., Rybakov V.N.

(Rus)

Vol 9, No 1 (2010)

Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine

1 1., 1 1.

(Rus)

Evaluating the possibility of using low-temperature thermal energy in liquefied natural gas complexes

Dovgjallo A.I., Sarmin D.V., Uglanov D.A., Shimanov A.A.

(Rus)

Vol 23, No 1 (2024)

Investigation of the influence of broadband mechanical disturbances on the quality of recording interference patterns of GTE-wheel oscillations using a digital speckle pattern interferometer

Ivchenko A.V., Safin A.I.

(Rus)

Vol 21, No 4 (2022)

Resistance of products made of steel 20GL to sulfide stress corrosion cracking

Blazhnov N.M., Borisenkova E.A., Khardin M.V.

(Rus)

Vol 19, No 2 (2020)

Development and research of a gas stamping device for making hollow products from a pipe billet

Botashev A.Y., Bayramukov R.A., Bisilov N.U., Dzhumanazarov E.K., Malsugenov R.S.

(Rus)

Conditions of compatibility of compressor and turbine used as part of a gas generator required to ensure turbine operability

Grigoriev A.V., Ilyushin M.Y., Mitrofanov V.A., Rassokhin V.A., Rudakov O.A., Solovieva A.V.

(Rus)

Vol 23, No 1 (2024)

Neural network controller of a gas turbine plant low emission combustor

Avgustinovich V.G., Kuznetsova T.A., Sukharev A.A.

(Rus)

The task of creating the bypass engines of various thrust levels using the given gas generator

Kocherov E.P., Kuzmichev V.S., Kulagin V.V., Fedorchenko D.G.

(Rus)

Vol 22, No 4 (2023)

Method of scanning thin surfaces in repairing gas turbine blades

Kotlyar D.I., Lomanov A.N.

(Rus)

On selection of automatic control system for crvogenic fuel gas turbine engine

Bukin V.A.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Project of 30 000 h.p. power gas turbine

Zrelov V.A.

(Rus)

Vol 20, No 1 (2021)

Mathematical model of turbofan engine weight estimation taking into account the engine configuration and size

Avdeev S.V.

(Rus)

Vol 18, No 3 (2019)

Design of experiments for verification of computational life prediction methods

Samsonova O.V., Fetisov K.V., Karpman I.V., Burtseva I.V.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Features of start-up the engine of internal combustion with spark ignition on gas fuel

Shishkov V.A.

(Rus)

Experiment-calculated research of the influence of the shot-peening strengthening upon the low-cycle fatigue of the gas turbine parts with the stress concentrator

Porter A.M., Bukaty S.A., Leshin D.P., Bukaty A.S.

(Rus)

Vol 18, No 1 (2019)

Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 17, No 3 (2018)

Analysis of schemes of correction of dynamic characteristics of acoustic probes for measuring pressure pulsations in a gas turbine engine

Gimadiev A.G., Bystrov N.D., Dyagileva E.S.

(Rus)

Vol 16, No 4 (2017)

The use of gas-dynamic flame stabilization in afterburner combustion chambers of aircraft gas turbine engines

Kolesnikov A.S., Pakhol'chenko A.A.

(Rus)

Vol 15, No 4 (2016)

Morphological characteristics of the intermetallic phase of heat resisting nickel alloys

Kirikov S.V., Perevezentsev V.N., Tarasenko Y.P.

(Rus)

Vol 15, No 3 (2016)

Laser powder weld reconditioning of gas turbine engine blades

Korsmik R.S., Turichin G.A., Klimova-Korsmik O.G., Zemlyakov E.V., Babkin K.D.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Application of numerical simulation systems for the research of the blade casting process in blank production

Smelov V.G., Vdovin R.A., Agapovichev A.V.

(Rus)

Vol 10, No 5 (2011)

Simulation of aerodynamic structure of the flow in the combustion chamber of a small-size gas turbine engine with the help of CAE–systems

Matveev S.G., Orlov M.Y., Abrashkin V.Y., Zubrilin I.A., Matveev S.S.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Development of a prototype of a multi-loop closedbrayton cycle gas turbine power system

Arbekov A.N., Novitskiy B.B.

(Rus)

Vol 11, No 4 (2012)

Stabilization of a pilot-operated gas pressure control valve by placing a throttle at the inlet

Stadnik D.M., Sverbilov V.Y., Makaryants G.M., Makaryants M.V.

(Rus)

Working conditions analysis of rotor supports bearings in aviation gas turbine engines and energetic units structure

Zrelov V.A., Makarchuk V.V., Prodanov M.E., Sudarev A.A.

(Rus)

Problem of multistage compressor optimization while designing perspective gas turbine engines

Shabliy L.S.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

The use of gas turbines in small-scale installations of synthetic fuels

Filipchenko S.A., Faridonov R.R., Gushchina T.V.

(Rus)

Vol 12, No 3-2 (2013): Vestnik SSAU

Aerodynamic improvement of GTE compressors by space profiling of blade vanes

Gerasimenko V.P., Shelkovsky M.Y.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Generation of control programes for disposable unmanned aircraft vehicle propulsion system by means of dynamic characteristic

Mikhailov A.Y., Akhmedzyanov D.A., Akhmetov Y.M., Mikhailova A.B.

(Rus)

Vol 9, No 4 (2010)

Variations in free cross-sectional areas of the phases of double-phase flows under changes of gaseous phase rate of flow

Levkin Y.S.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

Designing and experimental research of hybrid gas bearings for heavy multibasic rotor of gas turbine

1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Way of increase in efficiency of cycle gas turbine units

1 1.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Pressure-gain combustion and its potential for gas turbine engine enhancement

Lutoschkin E.V., Rose M.G., Staudacher S.

(Rus)

Test case of 3d unsteady swirling flows modeling using commercial and in-house codes

Nazukin V.A., Avgustinovich V.G., Thornber B., Aguado Lopez P., Tsatiashvili V.V., Koromyslov E.V.

(Rus)

Estimation of parameters of a pulse detonation engine (РDЕ)

Anakin A.T., Tsybizov Y.I.

(Rus)

Vol 19, No 4 (2020)

Сalculation of characteristics of atomization of liquid supplied at an angle to the flow direction and justification of adjusting the angle of the nozzle inclination relative to the gas flow

Teslya D.N., Mityaev S.V., Drobyshev P.A.

(Rus)

Vol 18, No 3 (2019)

Сalculated analysis of the influence of operation and design factors on the parameters of oxygen-hydrogen low-thrust rocket engines

Ryzhkov V.V., Morozov I.I.

(Rus)

Possibility of use of passing gases in gasturbine engines created within the limits of conversion

Rosljakov A.D., Kocherov E.P., Tsibizov J.I.

(Rus)

Vol 18, No 2 (2019)

Ensuring permissible level of gas turbine dynamic loading in operation by means of standard engine control devices

Chervonyuk V.V., Korovin B.B.

(Rus)

Vol 18, No 1 (2019)

Research of the operability of an air-fuel lubrication and cooling system of gas turbine engine rotor bearings

Klimov V.N., Dud’ev D.Y., Sigaylo V.Y., Klimov N.I., Mashkov Y.K.

(Rus)

Vol 17, No 3 (2018)

Evaluation of turbine rotor blade life taking into account static and thermal cyclic loading

Badamshin I.K.

(Rus)

Vol 15, No 4 (2016)

Application of structure-energy failure theory for determining the probability of failure and durability of turbine and compressor blades of aircraft engines

Chernyaev A.I., Trefilov V.A.

(Rus)

Vol 15, No 3 (2016)

Suppression of gas-dynamic self-oscillations in the outflow line of a gas control valve

Balyaba M.V., Ermilov M.A., Kryuchkov A.N., Shabanov K.U.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Application of stereolithography prototypes for gas dynamic tests

Matveev V.N., Shabliy L.S., Krivcov A.V.

(Rus)

Vol 10, No 5 (2011)

Modeling of propane combustion processes in case of converting a GTE combustion chamber to gaseous fuel

Matveev S.G., Lanskiy A.M., Orlov M.Y., Abrashkin V.Y., Dmitriev D.N., Zubrilin I.A., Semenov A.V.

(Rus)

Vol 14, No 1 (2015)

Computer-aided design of aircraft gas turbine engines and selection of materials for their main parts

Akhmedzyanov D.A., Kishalov A.E., Markina K.V.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Design of the gas turbine engine rotor wheel with ceramic blades

Sapronov D.V., Reznik S.V.

(Rus)

Approaches to parametric models of blade machines formation

Shabliy L.S., Popov G.M., Kolmakova D.A.

(Rus)

Off-line long-life unservice close gas organic fuel-powered turbine

Arbekov A.N.

(Rus)

MR vibration dampers development to reduce vibration and noise in gas turbine locomotive and their equivalent vibration tests

Ermakov A.I., Lazutkin G.V., Parovay F.V., Troynikov A.A.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Development liquid roket engine on component fuel liquefied natural gas and oxygen for reusable space launching systems

Efimochkin A.F., Khrisanfov S.P., Golubyatnik V.V., Kafarena P.V., Yeliseyev A.V.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Operational testing of thermoplastic reinforced blades

Krutsilo V.G., Krotinov N.B.

(Rus)

Vol 13, No 1 (2014)

Simulation and research of factors affecting aerodynamic indices of the gas purification process

Usmanova R.R., Zhernakov V.S.

(Rus)

Vol 9, No 2 (2010): Special Issue

Analysis of possibility of residual propellant utilization in Soyuz orbital stage for controllable descent

1 1., 1 1., 1 1., 1 1.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

Theoretical calculation approach of gas turbine engines compressor characteristic line

1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Probabilistic estimate of compressor blades durability to foreign object damage

1 1., 1 1.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Wearability, wearproof and heat-shielding coverings for details of the gas path of the turbine, the compressor and the chamber of combustion of gas turbine engine

Barvinok V.A., Shitarev I.L., Bogdanovich V.I., Dokukina I.A., Karasev V.M.

(Rus)

Development of an algorithm of design calculation of a combustion chamber for microturbine electric power plants

Matveev S.G., Abrashkin V.Y., Orlov M.Y., Lansky A.M., Makarov N.S., Matveev S.S., Anisimov M.Y.

(Rus)

Vol 19, No 4 (2020)

The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters

Omar H.H., Kuz'michev V.S., Zagrebelnyi A.O., Grigoriev V.A.

(Rus)

Vol 18, No 3 (2019)

Life of gas turbine engine components under corrosive exposure

Pivovarova M.V., Gladkiy I.L.

(Rus)

Vol 10, No 3-3 (2011): Special Issue

Investigation of resonant oscillations working plates in experimental models of pneumatic valve

Zhuravliov О.A., Komarov S.Y., Makaryants G.M., Sergeev R.N., Harchikova J.V.

(Rus)

Vol 18, No 2 (2019)

Calculation of lubricant flow in the slide bearing of the aviation engine reducer

Siluyanova M.V., Fertikov A.О.

(Rus)

Vol 17, No 4 (2018)

Optimization of fuel distribution in the afterburner of a gas turbine engine

Nelyubin V.R.

(Rus)

Vol 17, No 2 (2018)

Development of a multiuser system web-interface as a tool of using mathematical packages for solving engineering tasks

Danilenko A.N., Zhdanov I.A.

(Rus)

Vol 16, No 3 (2017)

Constructing 3D fan blade models in CAD-system on the basis of coordinate measuring techniques

Arkhipov A.N., Ravikovich Y.A., Fedorov I.M., Kholobtsev D.P.

(Rus)

Vol 15, No 4 (2016)

Mathematical modelling of the working process of a hot gas pressure feed system

Salich V.L.

(Rus)

Vol 10, No 6 (2011)

Estimation of the required thrust impulse for small spacecraft (SSC) control system with a propulsion system using fuel gas components

Titov B.A., Koltsov I.V.

(Rus)

Vol 14, No 3-1 (2015): Special Issue

Research of hydrodynamic processes in the lubrication system of gas turbine engines

Gulienko A.I., Shchurovskiy Y.M.

(Rus)

Vol 10, No 5 (2011)

Experimental study of swirled gas flow by the particle image velocimetry method

Knysh Y.A., Redkin Y.S., Dmitriev D.N.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Calculation of exciting aerodynamic load on a gas turbine engine compressor blade induced by the effect of a non-uniform gas flow

Ermakov A.I., Shklovets A.O., Fedorchenko D.G.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Validation of CFD-models of gas turbine engine uncooled turbines

Matveev V.N., Popov G.M., Goryachkin E.S., Smirnova Y.D.

(Rus)

On the development of probes for measuring pressure pulsations in the gas-dynamic channel gas generator

Shorin V.P., Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A., Alexandrova T.G.

(Rus)