Issue |
Title |
File |
Vol 10, No 3-2 (2011): Special Issue |
On selection of automatic control system for crvogenic fuel gas turbine engine |
(Rus)
|
Bukin V.A.
|
Vol 5, No 2-2 (2006): Special Issue |
On selection of equivalent loading of standard smooth specimens for determining low-cycle durability of gas-turbine engine major components |
(Rus)
|
1 1., 1 1., 1 1., 1 1.
|
Vol 11, No 5-2 (2012): Special Issue |
On the development of experimental methods in research of folded core type z-crimp on the transverse compressive test strength |
(Rus)
|
Dvoeglazov I.V., Khaliulin V.I.
|
Vol 11, No 3-2 (2012): Special Issue |
On the development of probes for measuring pressure pulsations in the gas-dynamic channel gas generator |
(Rus)
|
Shorin V.P., Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A., Alexandrova T.G.
|
Vol 16, No 1 (2017) |
On the efficiency of a radiant heating regenerative system |
(Rus)
|
Panchenko V.V.
|
Vol 21, No 1 (2022) |
On the efficiency of using the Navier-Stokes approximation in thermogasdynamic calculation of low-thrust liquid-propellant rocket engines at low Reynolds numbers |
(Rus)
|
Maksimov A.D., Shustov S.A.
|
Vol 5, No 2-1 (2006): Special Issue |
On the interrelation of the regularities of long-term fracture established in testing of smooth and notched specimens |
(Rus)
|
1 1., 1 1., 1 1.
|
Vol 10, No 3-2 (2011): Special Issue |
On the issue of research of the properties of the heat-resistant nickel single-crystal superalloys |
(Rus)
|
Tikhomirova E.A., Zhivushkin A.A., Getsov L.B., Rybnikov A.I.
|
Vol 11, No 3-3 (2012): Special Issue |
On the structural and object approaches to modern training for the aerospace industry |
(Rus)
|
Bezmenova N.V., Prodanov M.Y.
|
Vol 5, No 2-1 (2006): Special Issue |
On the use of the method of base diagrams for specifying the prediction of the long-term strength of heat-resistant nickel-base alloys |
(Rus)
|
1 1.
|
Vol 15, No 2 (2016) |
On-board algorithm for SamSat-218D nanosatellite orientation and stabilization system |
(Rus)
|
Kramlikh A.V., Melnik M.E.
|
Vol 12, No 4 (2013) |
Onboard digital computer systems of the «Malachite» family for extreme conditions |
(Rus)
|
Antimirov V.M., Umansky A.B., Shalimov L.N.
|
Vol 13, No 2 (2014) |
One method to build flying vehicle launch catapults |
(Rus)
|
Taranukha V.P., Petrushin S.A., Pechenkin A.Y., Glushkov V.A.
|
Vol 2, No 1 (2003) |
ONLY A FEW PROJECTIONS COMPUTED TOMOGRAPHY IN A PHYSICAL EXPERIMENT |
(Rus)
|
Filonin O.V.
|
Vol 12, No 4 (2013) |
On-stand emergency protection and control system for propulsion tests of «Soyuz-2-1B» launch vehicle |
(Rus)
|
Liseykin V.A., Tozhokin I.A.
|
Vol 14, No 3 (2014) |
Ontology description languages for high-tech fields of applied engineering |
(Rus)
|
Burakova E.E., Borgest N.M., Korovin M.D.
|
Vol 8, No 3-2 (2009): Special Issue |
Operate reliability enhancement of thermogenerator modules for heat engine with acoustic emission method |
(Rus)
|
1 1.
|
Vol 10, No 6 (2011) |
Operation of an electronic system of control for spark-ignition gas fuel internal combustion engines in ignition misses |
(Rus)
|
Shishkov V.A.
|
Vol 10, No 3-1 (2011): Special Issue |
Operational testing of thermoplastic reinforced blades |
(Rus)
|
Krutsilo V.G., Krotinov N.B.
|
Vol 10, No 1 (2011) |
Opntimization of business processes for design and technological planning of production using SADT technologies for the Samara metallurgical plant "ALCOA" |
(Rus)
|
Zelenev A.V., Khaimovich I.N.
|
Vol 21, No 4 (2022) |
Optical characteristics of a multilayer solar sail and their effect on its heliocentric motion |
(Rus)
|
Rozhkov M.A.
|
Vol 7, No 2 (2008) |
Optical micromanipulation |
(Rus)
|
Skidanov R.V.
|
Vol 19, No 2 (2020) |
Optimal command control of flight paths of aerospace system hypersonic first stage in conditions of atmospheric disturbances |
(Rus)
|
Krikunov M.M.
|
Vol 19, No 1 (2020) |
Optimal command control of hypersonic aircraft flight path in conditions of atmospheric disturbances |
(Rus)
|
Krikunov M.M.
|
Vol 15, No 2 (2016) |
Optimal control laws of onboard coils for the reduction of angular momentum and damping of angular velocity of nanosatellites and microsatellites with magnetic coils on board |
(Rus)
|
Lyubimov V.V., Podkletnova S.V.
|
Vol 18, No 4 (2019) |
Optimal control of spacecraft motion in the vicinity of Eros 433 asteroid |
(Rus)
|
Shornikov A.Y.
|
Vol 12, No 1 (2013) |
Optimal control of the angle of attack of a hypersonic flight vehicle |
(Rus)
|
Bebyakov A.A.
|
Vol 12, No 2 (2013) |
Optimal design of an induction heater of minimum length |
(Rus)
|
Mednikova V.A.
|
Vol 20, No 2 (2021) |
Optimal design of sandwich floor panels made of high-strength composite materials considering stiffness constraints |
(Rus)
|
Komarov V.A., Pavlova S.A.
|
Vol 8, No 4 (2009) |
Optimal designing of precision small-size non-platform inertial navigation systems for highly manoeuvrable moving objects |
(Rus)
|
Voditcheva L.V., Belsky L.N., Maslova O.N., Lukin N.A.
|
Vol 12, No 3-2 (2013): Vestnik SSAU |
Optimal distribution of turboprop engine free energy between the screw and the jet with mass characteristics taken into account |
(Rus)
|
Grigoriev V.A., Prokaev A.S.
|
Vol 5, No 1 (2006) |
Optimal positioning of supports for statically definable beams |
(Rus)
|
1 1., 1 1.
|
Vol 10, No 1 (2011) |
Optimal program of controlling continuous low thrust in the flight between noncoplanar elliptical and geostationary orbits |
(Rus)
|
Fadeenkov P.V., Ishkov S.A.
|
Vol 15, No 1 (2016) |
Optimal stabilization of small spacecraft angular motion in the process of deployment of an orbital tether system |
(Rus)
|
Zabolotnov Y.M., Lobankov A.A.
|
Vol 3, No 1 (2004) |
Optimal strategies of attracting financial resourse for long-term company development |
(Rus)
|
1 1.
|
Vol 4, No 1 (2005) |
Optimality of decentralized hierarchy controlling non-connected technological network |
(Rus)
|
1 1.
|
Vol 8, No 3-2 (2009): Special Issue |
Optimization characteristics of rotor-support system from NK-14ST free power turbine with consider statics and dynamics propertys |
(Rus)
|
1 1., 1 1.
|
Vol 10, No 4 (2011) |
Optimization economic and mathematical model of cash flows for the investment credit of a small business |
(Rus)
|
Bondarchuk K.L.
|
Vol 11, No 3-3 (2012): Special Issue |
Optimization features of the working process parameters of bypass engine on the basis of given gas generator |
(Rus)
|
Rybakov V.N.
|
Vol 9, No 2 (2010): Special Issue |
Optimization methods of design-ballistic characteristics circumterraneous and interplanetary space vehicle with electrojet engines of low thrust |
(Rus)
|
1 1., 1 1., 1 1., 1 1., 1 1., 1 1., 1 1., 1 1., 1 1.
|
Vol 11, No 3-1 (2012): Special Issue |
Optimization methods pilotage aircraft in take-off and approach cycle for decrease square his sound track |
(Rus)
|
Zamtfort B.S., Medvedev Y.V.
|
Vol 10, No 4 (2011) |
Optimization model of financing production of an industrial enterprise of space-rocket industry |
(Rus)
|
Inozemtsev V.V.
|
Vol 6, No 1 (2007) |
Optimization of a stochastic tracking system using numerical and evolution methods |
(Rus)
|
Fyodorova M.A.
|
Vol 5, No 1 (2006) |
Optimization of a thin-walled wireframe structure with strength and stiffness limitations |
(Rus)
|
1 1., 1 1.
|
Vol 11, No 5-1 (2012): Special Issue |
Optimization of aircraft seven stage compressor first stages parameters |
(Rus)
|
Popov G.M., Matveev V.N., Baturin O.V., Kolmakova D.A.
|
Vol 11, No 3-1 (2012): Special Issue |
Optimization of casing on mass with ensuring requirements for deduction of the ragged blade |
(Rus)
|
Krundaeva A.N., Gabov D.V., Maralev A.Y.
|
Vol 11, No 5-1 (2012): Special Issue |
Optimization of design diffuser of GTE combustion chamber with using CAE-systems |
(Rus)
|
Orlov M.Y., Matveev S.S., Zinkovskiy V.S.
|
Vol 17, No 1 (2018) |
Optimization of ducted counter–rotating fan blades on the basis of solving a 3d inverse problem with the aim of improving fan gasdynamic characteristics |
(Rus)
|
Mileshin V.I., Pankov S.V., Fateyev V.A., Shchipin S.K.
|
Vol 14, No 1 (2015) |
Optimization of fatique validation cost for redesigned transport aircraft |
(Rus)
|
Kleptsov V.I.
|
Vol 6, No 1 (2007) |
Optimization of flights between non-coplanar circular orbits with a two-stage booster with chemical and electrojet engines |
(Rus)
|
Fadeyenkov P.V.
|
Vol 17, No 4 (2018) |
Optimization of fuel distribution in the afterburner of a gas turbine engine |
(Rus)
|
Nelyubin V.R.
|
Vol 19, No 3 (2020) |
Optimization of honeycomb sandwich floor panels made of polymer-matrix low-combustible composite materials based on high-strength carbon and glass fibers and adhesive binder |
(Rus)
|
Komarov V.A., Kutsevich K.E., Pavlova S.A., Tyumeneva T.Y.
|
Vol 8, No 2 (2009) |
Optimization of material distribution in load-bearing units for several cases of loading |
(Rus)
|
Boldyrev A.V.
|
Vol 11, No 7 (2012) |
Optimization of model positional harakterstik of the electromagnetic sensor of the linear peremeshchny |
(Rus)
|
Tingaev V.S., Matyunin S.A., Mednikov V.A.
|
Vol 17, No 1 (2018) |
Optimization of open counter – rotation fan blades on the basis of solving a 3D Navier-Stokes inverse problem with the aim of reducing tonal noise |
(Rus)
|
Mileshin V.I., Rossikhin A.A., Pankov S.V., Shchipin S.K.
|
Vol 22, No 1 (2023) |
Optimization of operation mode and design parameters of a finely-dispersed metallic liquid-alloy generator |
(Rus)
|
Egorychev V.S., Ryazanov A.I., Khaimovich A.I.
|
Vol 16, No 1 (2017) |
Optimization of parameters of a hub aircraft ground handling system on the basis of a fuzzy-controller simulation model |
(Rus)
|
Vasileva I.A., Romanenko V.A., Khvostova T.V.
|
Vol 18, No 1 (2019) |
Optimization of space vehicle combined orbital plane change maneuver on the basis of pontryagin’s maximum principle |
(Rus)
|
Khramov A.A.
|
Vol 17, No 2 (2018) |
Optimization of space vehicle combined orbital plane change maneuver on the basis of the successive linearization method |
(Rus)
|
Balakin V.L., Ishkov S.A., Khramov A.A.
|
Vol 16, No 3 (2017) |
Optimization of space vehicle trans-atmospheric motion by using the method of sequential linearization |
(Rus)
|
Balakin V.L., Ishkov S.A., Khramov A.A.
|
Vol 14, No 4 (2015) |
Optimization of spatial turns of «AIST-2» small spacecraft on the basis of the principle of minimum control |
(Rus)
|
Petrishchev V.F., Shipov M.G.
|
Vol 11, No 5-1 (2012): Special Issue |
Optimization of strength characteristics of lighting devices aircraft by construction of virtual models |
(Rus)
|
Abulkhanov S.R., Goryainov D.S., Skuratov D.L.
|
Vol 13, No 5-4 (2014): Special Issue |
Optimization of the design of a railway searchlight in the ANSYS software environment |
(Rus)
|
Abulkhanov S.R.
|
Vol 22, No 4 (2023) |
Optimization of the parameters of a ground speed meter of low-flying aircraft based on the application of the theory of optimal filtration |
(Rus)
|
Ivanov M.E., Yezerskiy V.V.
|
Vol 5, No 2-1 (2006): Special Issue |
Optimization of the residai stress in the surface layer of the blades is the method of the increasing reliability and resource |
(Rus)
|
., .
|
Vol 10, No 4 (2011) |
Optimization of the schedule of financing of the investment project on graphs of works for oil and transport branches |
(Rus)
|
Morozova S.A.
|
Vol 10, No 3-2 (2011): Special Issue |
Optimization of the technology of ion-plasma coating of titanium nitride in the small-sized thin-walled details |
(Rus)
|
Tarasenko Y.P., Krivina L.A., Tsareva I.N., Il'ichev V.A.
|
Vol 14, No 3-2 (2015): Special Issue |
Optimization of the workflow of multistage axial turbines with platforms |
(Rus)
|
Matveev V.N., Baturin O.V., Popov G.M., Goryachkin E.S.
|
Vol 10, No 1 (2011) |
Optimization of thermomechanical parameters of high speed forging of titanium alloys |
(Rus)
|
Khaimovich A.I., Mikheyev V.A.
|
Vol 23, No 1 (2024) |
Optimization of trajectory motion of the first stage of an aerospace system |
(Rus)
|
Khramov A.A.
|
Vol 11, No 6 (2012) |
Optimization ofwarehouse and transport activity of a machine-building enterprise with regard to individual supply functions of providers |
(Rus)
|
Bogatyryov V.D., Yurchenko K.A.
|
Vol 17, No 1 (2018) |
Optimizing a vehicle trans-atmospheric motion using Pontryagin’s maximum principle |
(Rus)
|
Balakin V.L., Ishkov S.A., Khramov A.A.
|
Vol 20, No 3 (2021) |
Optimizing the allocation of technological resources of an air transport system in the presence of a schedule and fuzzy input data |
(Rus)
|
Romanenko V.A.
|
Vol 19, No 1 (2020) |
Optimizing the process of changing spacecraft orbital parameters by using a spinning electrodynamic tether sytem |
(Rus)
|
Lu H., Wang C., Zabolotnov Y.M.
|
Vol 7, No 1 (2008) |
Optimizing the propulsion of a hypersonic accelerator aircraft of a two-stage aerospace system |
(Rus)
|
Balakin V.L., Bebyakov A.A., Kotchyan A.G.
|
Vol 3, No 1 (2004) |
Optimum distribution of navigational position and velocity sessions for a spacecraft with remote sounding of the earth using data from integrated navigation complexes |
(Rus)
|
1 1.
|
Vol 10, No 2 (2011) |
Optimum programs of correction of quasielliptical and circular orbits of spacecraft with the limited-thrust engine |
(Rus)
|
Khramov A.A.
|
Vol 9, No 1 (2010) |
Optoelectronic device for the control of hydrocarbon fuel cavitation treatment |
(Rus)
|
1 1.
|
Vol 2, No 1 (2003) |
OPTOELECTRONIC DISCRETE PHASE METHOD FOR THE DETERMINATION OF TURBINE BLADE |
(Rus)
|
Danilin A.I.
|
Vol 7, No 1 (2008) |
Orbital tether system motion equations considering space vehicle vibrations |
(Rus)
|
Aslanov V.S., Stratilatov N.R.
|
Vol 11, No 5-1 (2012): Special Issue |
Organization of go-ahead engineers training for aircraft industry at the example of the strategic alliance of Ulyanovsk state university and CJSS “Aviastar-SP” |
(Rus)
|
Polyanskov Y.V., Shabalkin D.Y., Evseev A.N.
|
Vol 5, No 1 (2006) |
Organization of search and evacuation of reentry vehicles and capsules |
(Rus)
|
.
|
Vol 10, No 7 (2011) |
Organization of the system franchising in higher education |
(Rus)
|
Nechitailo A.A., Nechitailo S.A.
|
Vol 8, No 3-1 (2009): Special Issue |
Organization of training of the CAD/CAM users in the specialized scholastic-industrial centre of the technical university |
(Rus)
|
Cherepashkov A.A.
|
Vol 4, No 2 (2005) |
Orientation of business society and authority relations to the innovative way of development |
(Rus)
|
.
|
Vol 5, No 1 (2006) |
Oscillatory model of control over military training center material and technical supply |
(Rus)
|
.
|
Vol 11, No 3-2 (2012): Special Issue |
Oxygen-hidrogen liquid rocket engine using turbo-pump developed for aviation hidrogen liquid two-spool turbo-jet |
(Rus)
|
Ivanov A.I., Borisov V.A.
|
Vol 8, No 3-3 (2009): Special Issue |
Oxyhydrogen propulsion device base on water electrolysis and lrest on component H2 + O2 for control system SS |
(Rus)
|
1 1., 1 1., 1 1., 1 1., 1 1.
|
Vol 7, No 1 (2008) |
Parameter measurement quality control in automated testing of series gas turbine engines |
(Rus)
|
Botchkaryov S.K.
|
Vol 11, No 5-2 (2012): Special Issue |
Parameters study in the electrothermal and jet protection of the airliner cockpit windows from fogging |
(Rus)
|
Nikolayev V.N.
|
Vol 11, No 7 (2012) |
Parameters transducers of the blade’s dynamic movements of turbounits based on nonlinear approximation of primary signals |
(Rus)
|
Chernyavskiy A.Z., Danilin A.I., Danilin S.A.
|
Vol 9, No 4 (2010) |
Parametric analysis of thermoacoustic travelling-wave engine operation with external heat application |
(Rus)
|
Dovgyallo A.I., Zynovyev Y.A., Vorotnikov G.V.
|
Vol 5, No 1 (2006) |
Parametric CFD designing of combustion chamber elements |
(Rus)
|
1 1., 1 1., 1 1.
|
Vol 7, No 2 (2008) |
Parametric function of differential backscattering in multiple scattered media |
(Rus)
|
Zakharov V.P., Sindyaeva A.R.
|
Vol 13, No 5-1 (2014): Special Issue |
Parametric instability of the dynamics of gear wheels |
(Rus)
|
Kurushin M.I., Balyakin V.B., Kurushin S.A.
|
Vol 11, No 3-3 (2012): Special Issue |
Parametric modeling cog wheels in Siemens NX |
(Rus)
|
Ramzaeva E.A.
|
Vol 20, No 4 (2021) |
Parametric study of the influence of location and extension height of the rod interceptor on jet engine nozzle characteristics |
(Rus)
|
Tishchenko K.O., Brykov N.A., Belyaeva A.S.
|
Vol 12, No 4 (2013) |
Parametrical design of discrete mapping of Van der Pol oscillator |
(Rus)
|
Zaitsev V.V., Nuraev D.B., Yudin A.N.
|
Vol 11, No 4 (2012) |
Parametrical optimizing of a transfer air transportation system in conditions of uncertainty |
(Rus)
|
Romanenko V.A.
|
Vol 8, No 3-2 (2009): Special Issue |
Particularity of thermal condition computation oF LRE with cooling by liquid oxygen |
(Rus)
|
1 1.
|
1701 - 1800 of 2643 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 > >> |