Search

Coefficient of residual stresses influence on cylindrical parts endurance limit under bending estimation

Semyonova O.Y., Kirpichev V.A., Deniskina E.A.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

The determination of the efficient parameters of surface strenghtening the thin-walled and the small-hard parts of gas turbine engines based on deformation tolerance

1 1., 1 1.

(Rus)

Study of residual strained state components distribution in the smallest section of superficial hardened part with a circular cut by finite-elements modeling method

Sazanov V.P.

(Rus)

Quality criteria hardened surface layer, the effective parameter management process technology of surface plastic deformation

Khibnidc T.A., Koltsoun Y.I.

(Rus)

Vol 7, No 1 (2008)

Impact of smooth part residual stress distribution on additional stresses in case of leading surface plastic deformation

Pavlov V.F., Kirpitchyov V.A., Deniskina Y.A., Semyonova O.Y.

(Rus)

Calculation methods of investigating the surface layer of thin-walled shafts hardened by methods of surface plastic deformation

Bukaty A.S., Shvetsov A.N.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Dependence of the endurance limit on the character of residual stresses distribution in the surface layer of hardened parts

Kirpichyov V.A., Vakulyuk V.S., Bukaty A.S., Lunin V.V., Mikhalkina S.A.

(Rus)

Vol 10, No 3-2 (2011): Special Issue

About relaxational resistance of the compressor’s blades from titanium alloys

Smyslov A.M., Smyslova M.K., Dubin A.I.

(Rus)

Vol 17, No 1 (2018)

Residual stresses and fatigue resistance of toothed wheels

Vakulyuk V.S., Kovalkin Y.P., Sazanov V.P., Shadrin V.K.

(Rus)

Estimation of tension of the surface layer of parts after hardening by different methods of surface plastic deformation

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Influence of the strengthening-finishing treatment on structure-energy state of surface layer and fatigue resistance

Sazonov M.B., Volkov A.N., Schigrinyev I.A.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Research of influence of methods SPD on stpucture surface layer and resistance of fatigue

Volkov A.N., Sazonov M.B., Schigrinyev I.A.

(Rus)

Nitriding influence on residual stresses and endurance limit of specimens with notches made of 38Х2МЮА steel

Vakuljuk V.S., Chirkov A.V., Bukatyi A.S., Philippov A.A.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

Investigation of processing performance on finish turning of high strength steel 30HGSN2A

1 1., 1 1., 1 1.

(Rus)

Vol 21, No 1 (2022)

The nature of change in the residual stress-strain state of dovetail lock joints, taking into account nonlinear strains

Zhernakov V.S., Mardimasova T.N., Koneva K.V.

(Rus)

Vol 16, No 2 (2017)

New technologies of manufacturing non-rigid parts made of titanium alloys and stainless steels

Kiselev E.S., Blagovskiy O.V.

(Rus)

Experimental research of the surface layer quality and cutting forces in flat grinding of the BT6 titanium alloy

Fedorov D.G., Skuratov D.L.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Investigation of heredity of errors in the workpieces parameters on geometrical accuracy of ready detail

Dyomin F.I., Polyakov A.V., Polyakova T.V.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Influence of methods of strengthening technology on the stressstrain state and relaxation of residual stresses in titanium alloys

Papsheva N.D., Akushskaya O.M.

(Rus)

Vol 10, No 3-4 (2011): Special Issue

Influence of notch radius at advancing surface plastic deforming on endurance limit of detail

Vakuljuk V.S., Kirpichyev V.A., Pavlov V.F., Chirkov A.V.

(Rus)

Vol 16, No 1 (2017)

Influence of crack depth on the stress intensity coefficient in notched and smooth plates

Surgutanov N.A.

(Rus)

The influence of residual technological stress and service heat loads on the strength of railway wheels

Kerentcev D.E., Ponomarev J.K.

(Rus)

The dependence of detail fatigue resistance on the thickness of hardening layer under outstripping superficial plastic deforming

Vakuljuk V.S.

(Rus)

Vol 11, No 1 (2012)

The influence of the heat processing and plastic deformation modes on the formation of the aluminum alloys structure

Savelyeva O.G.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

Ultrasonic hardening of parts GTE

Alexandrov M.K., Papsheva N.D., Akushskaya O.M.

(Rus)

Control metods of hardening process in the time of SPD

Volkov A.N., Sazonov M.B., Mashinnov K.Y.

(Rus)

Vol 18, No 1 (2019)

Influence of the stressed state of the surface layer on the endurance of gas turbine engine compressor blades

Sazonov M.B., Solovatskaya L.V.

(Rus)

Vol 14, No 1 (2015)

Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance

Kostichev V.E.

(Rus)

Residual stresses distribution regularities in the smallest section of hardened hollow cylindrical detail with circular cut

Sazanov V.P., Larionova Y.S., Kolychev S.A.

(Rus)

Residual stresses in the specimens with opennings imitating openings for coupling bolt into the turbine of jet engines

Vakuljuk V.S., Kirpichyev V.A., Pavlov V.F., Sazanov V.P.

(Rus)

Vol 17, No 3 (2018)

Residual stress optimization of technological processes with the aim of ensuring adhesion of nickel or chromium coatings on parts made of titanium alloys

Bukaty A.S.

(Rus)

Vol 14, No 4 (2015)

Investigation of preliminary surface rolling influence on the fatigue resistance of threaded specimens

Sazanov V.P.

(Rus)

Research of notch radius and depth influence on residual stresses distribution character in the smallest cross-section of surface hardened detail

Sazanov V.P., Larionova Y.S.

(Rus)

Vol 13, No 1 (2014)

Forecasting the endurance limit of surface-hardened cylindrical parts made of steel 20 by the initial deformations of reference specimen

Sazanov V.P.

(Rus)

Vol 17, No 2 (2018)

Evaluating the efficiency of hardening treatment of cylindrical parts made of structural steels

Sazanov V.P., Pavlov V.F., Semyonova O.Y., Prokhorov A.A.

(Rus)

Vol 14, No 4 (2015)

Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber

Kocherova Е.Е.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Assessing the influence of surface hardening on the endurance limit of specimens made of steel 40X using residual stresses of reference specimen

Sazanov V.P., Vakulyuk V.S., Shadrin V.K., Surgutanov N.A., Shlyapnikov P.A.

(Rus)

Evaluation of thermochemical treatment influence on fatigue strength of specimens under normal and high temperatures

Pavlov V.F., Vakuljuk V.S., Afanasieva O.S., Bukatyi A.S.

(Rus)

Vol 10, No 1 (2011)

Residual stresses and fatigue resistance of surface-hardened notched cylindrical specimens made of steel 20

Semyonova O.Y.

(Rus)

Modeling of redistribution of residual stresses in the cylindrical specimens after advancing surface plastic forming

Chirkov A.V., Sazanov V.P., Samoylov V.A., Larionova Y.S.

(Rus)

Vol 17, No 2 (2018)

Prediction of endurance limit of hardened parts with account of operational factors

Pavlov V.F., Kirpichev V.A., Kiselev P.E., Shvetsova A.A.

(Rus)

Vol 14, No 4 (2015)

Estimation of residual stress influence on the low-cycle fatigue of threaded parts

Zlobin A.S.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Forecasting an increment in the parts’ endurance limit due to surface hardening

Pavlov V.F., Filatov A.P., Semyonova O.Y., Sazanov V.V., Mikushev N.N.

(Rus)

Ultrasonic hardening of specimens made of ЭИ698 alloy optimal regimes choice using average integral residual stresses criterion

Pavlov V.F., Filatov A.P., Shadrin V.K., Chirkov A.V.

(Rus)

Fatigue strength prediction of surface - hardened cylindrical specimens of different diameters

Kirpichev V.A., Pavlov V.F., Chirkov A.V., Ivanova A.V.

(Rus)

Vol 17, No 1 (2018)

Relation between characyeristics of low-cycle and high-cycle fatigue of threaded parts and residual stresses

Zlobin A.S.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

Determination of accuracy of the form and arrangement of working cylindrical and conic surfaces when processing details with small rigidity

Dyomin F.I., Polyakova T.V.

(Rus)