Search

3d virtual simulation and casting process optimization of part GTE "Swirler of II duct" with using computer technologies

Vdovin R.A.

(Rus)

Vol 11, No 2 (2012)

Simulation modeling of stock markets

Steryakov A.A.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Creative 2D-modeling

Bykov A.V., Karabcheyev K.S.

(Rus)

Vol 22, No 4 (2023)

JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines

Vinogradov K.A., Nikulin A.S., Shmotin Y.N.

(Rus)

Vol 11, No 4 (2012)

Small-sized two-coordinate sensor of the Sun’s angular position with enlarged field of view

Dyuldin R.S., Blinov V.D.

(Rus)

Vol 10, No 2 (2011)

Constructing simulation models of self-similar telecommunication traffic

Blagov A.V.

(Rus)

Vol 23, No 2 (2024)

Experimental analysis of instability and self-oscillations in an electrohydraulic servo drive

Petrov P.V., Sunarchin R.A., Mashkov M.A., Krivosheev N.S.

(Rus)

Vol 22, No 4 (2023)

Method of automated arrangement of devices in a spacecraft compartment taking into account connection to interface connectors of feed-through plates of an on-board cable system

Belyakov A.A., Prihodko V.I., Shulepov A.I.

(Rus)

Vol 23, No 2 (2024)

Comparative results of computational and theoretical study of the annular nozzle with a flat central body

Kirshina A.A., Levikhin A.A., Kirshin A.Y.

(Rus)

Vol 22, No 2 (2023)

Method of individual selection of parts for selective assembly of electrohydraulic servo drives

Medvedev A.V., Khalatov E.M.

(Rus)

Vol 21, No 2 (2022)

Validation of the “stage – diffuser” system numerical study and its use for design modernization

Cherkasova M.G., Semakina E.Y., Chernikov V.A.

(Rus)

Vol 14, No 2 (2015)

Modeling of dynamic processes in micromechanical inertial sensors and their components using specialized software

Barulina M.A., Pankratov V.M.

(Rus)

Vol 21, No 1 (2022)

Strength calculation of parts based on stress state stiffness

Bukatyi A.S., Bukatyi S.A.

(Rus)

Vol 19, No 2 (2020)

Gas turbine engine dynamic model based on variable-memory LSTM architecture

Kuznetsov A.V., Makaryants G.M.

(Rus)

Complex failure analysis of aero engine compressor blades

Sachin V.M., Tumanov N.V., Lavrentyeva M.A., Cherkasova S.A.

(Rus)

Vol 17, No 4 (2018)

Numerical simulation of low liquid flow in a mixer consisting of two centrifugal swirlers

Semkin E.V.

(Rus)

Vol 16, No 1 (2017)

Selection of reference specimens for assessing the efficiency of part surface nitriding

Sazanov V.V.

(Rus)

Vol 15, No 1 (2016)

Simulation of the process of angular rate damping of the SamSat-218D nanosatellite after separation from the launching-transporting container

Melnik M.E.

(Rus)

Vol 14, No 4 (2015)

Procedure of accomodation of earth remote sansing satellite external devices with regard for the satellite target operation

Akhmetov R.N., Shilov L.B., Kurenkov V.I., Yakischik A.A.

(Rus)

Vol 14, No 2 (2015)

Experience of operational development of starting characteristics of the APU combustion chamber

Chechulin A.Y.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Modeling of intrachamber processes in an oxygen-hydrogen thruster

Vaulin S.D., Salich V.L.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Comparison of mathematical simulation results and experimental research of PVD-K3-1 air pressure probe

Moiseev V.N., Dubinina M.M., Pavlovsky A.A., Sorokin M.Y.

(Rus)

Residual stresses distribution regularities in the smallest section of hardened hollow cylindrical detail with circular cut

Sazanov V.P., Larionova Y.S., Kolychev S.A.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

Investigation of the causes of the auger-centrifugal pump bearing destruction

Gafurov S.A., Rodionov L.V., Shahmatov E.V.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a full-size gas turbine combustor and its one-burner sector

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Computer simulation of forming operations of the magnetic-pulse processing of metals

Grechnikov F.V., Chernikov D.G.

(Rus)

Vol 12, No 3-2 (2013): Vestnik SSAU

Dynamic method of investigating stress concentrators of the YMZ-238 engine crankshaft considering surface hardening plastic deformation

Bukaty A.S., Kostichev V.E., Deniskina E.A.

(Rus)

Vol 10, No 3-1 (2011): Special Issue

The combined fuel draining control system for liquid oxygen and liquid hydrogen upper stage

Ivanov V.P., Partola I.S.

(Rus)

Vol 10, No 2 (2011)

Problem of synthesis of a model for control and diagnostics in the manufacture of onboard equipment

Koptev A.N., Kirillov A.V., Yakovenko N.A., Dronov D.Y.

(Rus)

Vol 9, No 2 (2010): Special Issue

Simulation of thermal field of fluid flow in the presence of parametric disturbances

1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Productivity enhancement by modelling based ONMRPII/ERP systems

1 1., 1 1., 1 1.

(Rus)

Vol 8, No 1 (2009)

Computer design of the gear cutting process using gear hob cutters

Polyanskov Y.V., Gismetulin A.R., Nikolayev A.V., Gribovskaya K.V.

(Rus)

Vol 7, No 1 (2008)

Computer-aided-design system for calculating adsorption thermodynamic characteristics

Zelenko L.S., Varfolomeyeva V.V., Kuznetsov V.Y., Fed’kayev A.V., Terentyev A.V., Buryak A.K.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Test case of 3d unsteady swirling flows modeling using commercial and in-house codes

Nazukin V.A., Avgustinovich V.G., Thornber B., Aguado Lopez P., Tsatiashvili V.V., Koromyslov E.V.

(Rus)

Vol 20, No 3 (2021)

State of the art of theory and technology of incremental forming

Grechnikov F.V., Surudin S.V., Erisov Y.A., De Alvarenga R.

(Rus)

Vol 10, No 6 (2011)

Analysis of load balancing algorithms using discrete event simulation

Khayrutdinov A.R., Vostokin S.V.

(Rus)

Study of mechanisms of low cycle fatigue crack propagation in aero engine disks under operating conditions and disk residual life estimation

Tumanov N.V., Cherkasova S.A., Lavrentyeva M.A., Vorobyeva N.A.

(Rus)

Vol 17, No 4 (2018)

Impact of the turbulence modeling approach on the accuracy of the fan noise level prediction

Pyatunin K.R., Arkharova N.V.

(Rus)

Vol 16, No 1 (2017)

Types of aeroelastic vibrations of turbomachinery bladed discs

Koskin A.O., Seleznev V.G.

(Rus)

Vol 15, No 1 (2016)

Modeling orbital tether system deployment with limitations on the deployment speed

Ishkov S.A., Filippov G.A., Xiaoye X.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Procedure of creating three-dimensional solid models of tool electrodes for electrochemical pulse machining of gas turbine engine parts in CAD-systems with their parametric coupling with software module profiling

Nekhoroshev M.V., Pronichev N.D., Smirnov G.V.

(Rus)

Vol 14, No 2 (2015)

ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing

Nuzhnov Y.V.

(Rus)

Vol 13, No 5-3 (2014): Special Issue

Development of parameter-orientedmodels of bladed disks for static strength analysis

Shklovets A.O., Urlapkin A.V., Boyarov K.V.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Introduction of model-based approach to design aircraft

Agaphonov O.A., Vakhrushev D.E., Pryadko S.P., Schukin A.V.

(Rus)

Study of residual strained state components distribution in the smallest section of superficial hardened part with a circular cut by finite-elements modeling method

Sazanov V.P.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Numerical modeling on dynamic process of injection in supersonic part of the nozzle

Yakovchuk M.S.

(Rus)

Vol 11, No 2 (2012)

Numerical simulation of gas temperature spatial distribution in a one-burner sector of a gas turbine combustor with uncertain initial conditions of fuel atomization

Kostyuk V.Y., Kirilash Y.I., Stasyuk A.V., Shein V.V., Karzov D.V.

(Rus)

Vortical gaz-wind-energy plant

Biryuk V.V., Zubrilin I.A., Krasnorutskiy A.S.

(Rus)

Numerical study of free convection in long vertical cylinder at constant vertical gradient of temperature on lateral surface

Khoroshev A.S.

(Rus)

Vol 13, No 1 (2014)

Controlled percolation and optimal two-phase operations in large-scale networks of nanosatellites

Mostovoi Y.A.

(Rus)

Vol 10, No 2 (2011)

Applied problems in the theory of diagnostic process for aircraft flight-navigation complexes

Koptev A.N., Kirillov A.V.

(Rus)

Vol 9, No 2 (2010): Special Issue

Methods of remote sensing data processing for the improvement of output images quality

1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Obliteration’s problems in capillary-porous structures of aerospace hydro systems’ parts

1 1., 1 1.

(Rus)

Vol 8, No 1 (2009)

Designing a system of automatic data transfer between Unigraphics NX4 and Catia V5 systems saving the construction tree

Nikolayev A.V., Maximova O.I., Tchernikov M.S., Zaikin M.A.

(Rus)

Vol 7, No 1 (2008)

Mathematical model of sequential feeders for centralized lubrication systems

Rybaltchenko D.Y., Shakhmatov Y.V., Belov G.O., Ilyukhin V.N.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

The influence of engineering changes on NOx emission in a gas-turbine endine combustion chamber

Mingazov B.G., Baklanov A.V.

(Rus)

Vol 20, No 3 (2021)

Introduction to the problem of calculating the parameters of the mixing chamber of an afterburning bypass engine

Karev O.D.

(Rus)

Vol 10, No 6 (2011)

Identification of empirical distributions

Gubarev V.V.

(Rus)

Improving the efficiency of diesel engines by means of electroprocessing of fuel

Kozmenkov I.N., Nosyrev D.Y.

(Rus)

Vol 17, No 3 (2018)

Estimating the efficiency of a bypass turbojet engine on the basis of a serial gas generator as a part of the power plant of a high-altitude unmanned aerial vehicle

Zinenkov Y.V., Lukovnikov A.V., Popov A.V., Nechaev V.N.

(Rus)

Vol 16, No 1 (2017)

Improvement of gas turbine engines due to isothermal expansion in the turbine

Muraeva M.A., Gorjunov I.M.

(Rus)

Vol 15, No 1 (2016)

Selection of a nanosatellite group separation program for cluster launching from the «Soyuz» launch vehicle orbiter

Avaryaskin D.P., Shcherbakov M.S.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Application of numerical simulation systems for the research of the blade casting process in blank production

Smelov V.G., Vdovin R.A., Agapovichev A.V.

(Rus)

Vol 14, No 2 (2015)

Determination of thermal state and modification of the flame tube cooling system with the help of three-dimensional modeling methods

Matveev S.G., Anisimov V.M., Zubrilin I.A., Kolomzarov O.V., Mironov N.S.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Synthesis of dynamic modes of attitude motion of spacecraft with solid propellant rocket engine

Balakin V.L., Doroshin A.V., Krikunov M.M.

(Rus)

On the structural and object approaches to modern training for the aerospace industry

Bezmenova N.V., Prodanov M.Y.

(Rus)

Vol 11, No 3-1 (2012): Special Issue

Modeling flow in a ring body work o-gap-state rocket engine turbopump

Ivanov A.V., Moskvichev A.V., Tsiganov A.A.

(Rus)

Vol 11, No 2 (2012)

Assessing the efficiency of flights to high near-earth orbits using boosters with chemical and electro-rocket engines

Ishkov S.A., Fadeenkov P.V., Balakin V.L.

(Rus)

Research of notch radius and depth influence on residual stresses distribution character in the smallest cross-section of surface hardened detail

Sazanov V.P., Larionova Y.S.

(Rus)

Vol 13, No 2 (2014)

Simulation of responses p-n junction to dynamic influences

Bodnarchuk G.A.

(Rus)

Vol 13, No 1 (2014)

Computer simulation of forming thin-walled t-tees

Popov I.P., Severinenko A.Y., Petrof Y.O.

(Rus)

Vol 10, No 2 (2011)

Flight-navigation complex diagnostics at the aircraft manufacture stage

Koptev A.N., Kirillov A.V.

(Rus)

Vol 9, No 2 (2010): Special Issue

Tether parameters consideration during motion simulation of orbital tether system

1 1.

(Rus)

Vol 8, No 3-2 (2009): Special Issue

Electronic model of turbine drive flow for its direct optimization

1 1.

(Rus)

Vol 8, No 1 (2009)

Peculiarities of electrohydraulic servo drive correction

Mesropyan A.V.

(Rus)

Vol 7, No 1 (2008)

Modelling of a municipal transport route network

Belokurov S.V.

(Rus)

Vol 12, No 3-1 (2013): Vestnik SSAU

Effect of non-uniform compressor flow parameters on the characteristics of a gas turbine engine combustion chamber

Matveev S.G., Orlov M.Y., Zubrilin I.A., Matveev S.S., Tsybizov Y.I.

(Rus)

Vol 20, No 2 (2021)

Three-dimensional inhomogeneous thermal fields of the “Photon-Amur 2.0” payload electronic board developed for nanosatellites

Fomin D.V., Barulinа M.A., Golikov A.V., Strukov D.O., German A.S., Ogorodnikov A.A.

(Rus)

Vol 18, No 3 (2019)

Life of gas turbine engine components under corrosive exposure

Pivovarova M.V., Gladkiy I.L.

(Rus)