Search

Increase of chrome-nickel steel 40ХН fatigue failure resistance by laser influence

Tregub V.I., Nikiforov A.M.

(Rus)

Vol 14, No 3-2 (2015): Special Issue

Application of the technology of pulsed laser surface coating in correcting casting defects of parts made of «ЖС-32» alloy

Smelov V.G., Sotov A.V., Agapovichev A.V., Nosova E.A.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Determination of the conditions of nanoporous structures formation in metal materials by pulse-periodic laser treatment

Murzin S.P.

(Rus)

Vol 13, No 1 (2014)

Method of calculating vibrations in a pipeline with damping supports made of MR material

Bezborodov S.A., Ulanov A.M.

(Rus)

Calculation of the first resonant frequency and the first resonant factor of a sound absorption of material МR

1 1., 1 1., 1 1., 1 1.

(Rus)

Investigation of an annular damper, made of material MR in the case of simultaneous load in axial and radial directions

Ulanov A.M., Shvetsov A.V., Parovay F.V.

(Rus)

Vol 14, No 3-1 (2015): Special Issue

Engineering design and experimental research of non-metallic parts and components of the hot section of the advanced gas turbine engine

Karimbayev T.D., Mezentsev M.A., Ezhov A.J.

(Rus)

Vol 13, No 5-2 (2014): Special Issue

Modification of the surface of silicon carbide parts by laser treatment for improving their tribological properties

Murzin S.P., Balyakin V.B., Zhuravel L.V.

(Rus)

Vol 9, No 3 (2010)

Design of schemes of financial and material flows in enterprise supply chains

Astapov S.V., Bogatyrev V.D.

(Rus)

Dependence between microscopic characteristics of the material MR and parameters of press forming

1 1., 1 1.

(Rus)

The intensification of selective laser sublimation processes for nanoporous metal materials formation

Murzin S.P., Osetrov E.L., Tregub V.I.

(Rus)

Vol 14, No 3-1 (2015): Special Issue

Prospects of application of nanostructured heterophase polyfunctional composite materials in aero-engine manufacturing

Nizovtsev V.E., Klimov D.A., Bortnikov A.D., Nizovtsevа O.V.

(Rus)

Vol 13, No 5-1 (2014): Special Issue

Elastic damping and dynamic characteristics of vibration isolators made of wire materials of different types

Yermakov A.I., Lazutkin G.V., Parovay F.V., Boyarov K.V., Bondarchuk P.V., Davydov D.P.

(Rus)

Vol 9, No 1 (2010)

Measuring scatlering cross-section under poor anechoicy conditions

1 1., 1 1., 1 1.

(Rus)

Method of calculating of the load characteristics of cylindrical support with a discrete location of elastic damping elements of the MR material

1 1., 1 1., 1 1., 1 1., 1 1.

(Rus)

Definition of the apparent elastic limit's change in metal materials at nanoporous structures formation

Murzin S.P., Tregub V.I., Osetrov E.L.

(Rus)

Vol 11, No 5-2 (2012): Special Issue

Curing agent for regulation of anisotropy mechanical properties of fibreglasses

Bazheryanu V.V., Zaychenko I.V.

(Rus)

Vol 8, No 3-1 (2009): Special Issue

Methods of calculating the load characteristics of ring dampers of the MR material with partial coverage of a bearing with precessional loading

Parovay F.V., Ponomaryov Y.K., Kotov A.S., Spivak S.E., Vasyukov E.S.

(Rus)

Vol 19, No 4 (2020)

Pressing of porous bodies made of MR wire material

Ermakov A.I., Davydov D.P., Shchemelev V.I., Lazutkin G.V.

(Rus)

Size distribution of holes in elements made of MR material

Zhizhkin A.M.

(Rus)

Vol 10, No 4 (2011)

Economic-mathematical model of the enterprise balance budget on the basis of operational and financial budgets

Esipova O.V.

(Rus)

Vol 11, No 3-2 (2012): Special Issue

MR vibration dampers development to reduce vibration and noise in gas turbine locomotive and their equivalent vibration tests

Ermakov A.I., Lazutkin G.V., Parovay F.V., Troynikov A.A.

(Rus)

Vol 8, No 4 (2009)

Mathematical modelling of the content of electronic educational resources

Solovov A.V.

(Rus)

Vol 8, No 2 (2009)

Development and analysis of compressed bending process in a die with an elastic punch

Komarov A.D., Yeskina Y.V., Ponikarova N.Y.

(Rus)

Vol 18, No 4 (2019)

Improvement of fretting wear resistance of blade root made of polymer composite material

Karimbayev T.D., Afanasiev D.V., Matyukhin D.V., Orlov M.A.

(Rus)

Modeling of heat conduction process in porous MR material

Zhizhkin A.M.

(Rus)

Vol 10, No 4 (2011)

Model of managerial decision making by enterprise of the trade and marketing network in collaboration with the industrial complex

Astapov S., Bogatyrev V.D.

(Rus)

Vol 11, No 1 (2012)

Development of yield criteria for the calculation of forming high-textured anisotropic blanks

Grechnikov F.V., Yerisov Y.A.

(Rus)

Vol 8, No 3-3 (2009): Special Issue

Experimental development of the LRE with CCCM nozzle’s extension

(Rus)

Vol 8, No 1 (2009)

Comparative analysis of different approaches to designing thin-walled element structures of composite materials

Komarov V.A., Tchernyaev A.V.

(Rus)

Calculation of basic parameters of spring unloading and shock-proof devices of all-metal multicomponent dampfers on material МR basis

Lazutkin G.V., Parovay F.V., Petukhova M.A., Troynikov A.A.

(Rus)

Mechanical characteristics of pipeline support dampers made of MR material

Ulanov A.M., Shvetsov A.V.

(Rus)

Vol 11, No 5-1 (2012): Special Issue

Action of pulsed magnetic field on the melt in the manufacture of "metal-nonmetal" composites

Lazareva A.A.

(Rus)

Modeling of heat conduction process in porous MR material

1 1.

(Rus)

Vol 8, No 1 (2009)

Experiments aboard the space vehicle “Photon-M” NO.3 and some reseelts of the mission

Abrashkin V.I., Shatokhin S.M., Kovalyova T.B., Safronov S.L.

(Rus)

Some questions of designing and manufacture of wire material hub dampfers

Lazutkin G.V., Parovay F.V., Troynikov A.A.

(Rus)

Vol 10, No 3-2 (2011): Special Issue

Way of the determination to long toughness unidirectional polymeric composition material and device for measurement effort, displacement and time before destruction sample

Lebedev D.N., Shcherbakov E.S., Larin M.N., Migachev A.S., Ilyin E.A.

(Rus)

Vol 13, No 5-4 (2014): Special Issue

Calculation of sleeve-shaped filter elements made of the MR material

Zhizhkin A.M., Lazutkin G.V., Volkova T.V.

(Rus)

Vol 13, No 1 (2014)

Life time of vibration isolators made of MR material subjected to random loads

Ulanov A.M., Bezborodov S.A.

(Rus)