Search

Issue
Title
Authors
Optimization of operation mode and design parameters of a finely-dispersed metallic liquid-alloy generator
Egorychev V.S., Ryazanov A.I., Khaimovich A.I.
Determination of thermal state and modification of the flame tube cooling system with the help of three-dimensional modeling methods
Matveev S.G., Anisimov V.M., Zubrilin I.A., Kolomzarov O.V., Mironov N.S.
Theory of gas turbine engine optimal gas generator
Grigoriev A.V., Kosmatov A.A., Rudakov О.A., Solovieva A.V.
Effect of non-uniform compressor flow parameters on the characteristics of a gas turbine engine combustion chamber
Matveev S.G., Orlov M.Y., Zubrilin I.A., Matveev S.S., Tsybizov Y.I.
Influence of the turbine ignition, flame tube suspension and nozzles on the combustion chamber characteristics
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Increasing the efficiency and stability of fuel supply to the combustion chamber of a liquid rocket engine by spray nozzles
Ageenko Y.I., Bubnova A.S.
Design and development of combustion chambers for gas turbine engines based on calculations of various levels of complexity
Aleksandrov Y.B., Nguyen T.D., Mingazov B.G.
Research of toxic substances emission during water injection into a combustion chamber
Mingazov B.G., Mukhametgaliev T.H.
Development of pneumatic- type starting nozzles for a full-scale low emission combustion chamber
Vasilyev A.J., Blumkin P.I., Chelebyan O.G.
Results of primary operation of NK-37 engine low emission combustion system
Bantikov D.Y., Yeliseev Y.S., Lavrov V.N., Pchelyakov A.A., Fedorchenko D.G., Tsybizov Y.I.
Technology of low-emission fuel combustion and conceptual structure of the combustion chamber of a gas-turbine power plant
Tsybizov Y.I., Tyulkin D.D., Vorotyntsev I.E.
Peculiarities of gas temperature field formation at the exit of small-sized gas turbine engine combustion chambers
1 1., 1 1., 1 1.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Indirect determination of the presence of vibration combustion in combustion chambers of turbine engines by a three-channel sensor for measuring movement
Limanova N.I., Yudin P.Y., Limanov I.A.
Multisprayer low-emission combustion chamber of modern turbojet engines – N. D. Kuznetsov’s creative heritage
Bantikov D.Y., Vasilyev V.I., Lavrov V.N., Tsibisov Y.I., Matveev S.G., Orlov M.Y., Zubrilin I.A.
Specific features of pressure pulsation control in combustion chambers of land based gas turbine units
Skiba D.V., Maksimov D.A., Kashapov R.S., Kharisov T.S.
Application of additive technology of selective laser melting (SLM) in designing a low emission combustion chamber of a gas turbine plant
Yeliseev Y.S., Fedorchenko D.G., Golanov S.P., Tsibisov Y.I., Tyulkin D.D., Vorotyntsev I.E., Ivchenko A.V.
Experience of operational development of starting characteristics of the APU combustion chamber
Chechulin A.Y.
Calculation of flow characteristics of liquid fuel supplied through pressure jet atomizers of small-sized gas turbine engines
Gurakov N.I., Zubrilin I.A., Hernandez Morales M., Yakushkin D.V., Didenko A.A., Matveev S.G., Komisar Y.V.
Influence in a constructive and regime parameters antechamber by operation-in the combustion chamber liquid-propellant rocket engine thrusters on hypergolic liquid propellants
Nigodjuk V.E., Sulinov A.V.
Testing of combined air-rocket engine mak-up with pulsing combustion chamber
Solodovnikov A.V., Vishegorodcev E.N., Golubyatnik V.V.
Experimental research on the development of an “oxygen (gas) + kerosene” – fueled thruster
Salich V.L.
Emission characteristics and temperature non-uniformity at the outlet of the gas turbine engine combustion chamber
Sabirzyanov A.N., Yavkin V.B., Alexandrov Y.B., Markushin A.N., Baklanov A.V.
Mathematical model for calculating radial non-uniformity of the gas temperature field at the exit of small gas turbine engine combustion chambers
Lukachev S.V., Abrashkin V.Y., Lansky A.M., Matveev S.G.
Physical workflow model in the combustion chamber LREST with a jet-centrifugal jets on hypergolic propellants
Silyutin M.V., Shustov S.A.
The numerical modelling of processes in combustion chambers of low thrust rocket engines
Salich V.L.
Using the phenomenon of electrical conduction of flame of non-homogeneous air-fuel mixture in design and development of combustion chamber
Shajkin A.P., Ivashin P.V., Galiev I.R., Derjachev A.D., Tverdohljobov A.J.
Simulation of aerodynamic structure of the flow in the combustion chamber of a small-size gas turbine engine with the help of CAE–systems
Matveev S.G., Orlov M.Y., Abrashkin V.Y., Zubrilin I.A., Matveev S.S.
The concept of matching the joint operation of the combustion chamber, the compressor and the turbine
Grigoriev A.V., Golubchikov P.P., YIlushin M.Y., Rudakov O.A., Solovieva A.V.
Problems and solutions of using computer technologies in designing of combustion chambers GTE
Matveev S.G., Orlov M.Y., Zubrilin I.A.
The influence of engineering changes on NOx emission in a gas-turbine endine combustion chamber
Mingazov B.G., Baklanov A.V.
Correlation and regression model for the assessment of circular non-uniformity of the gas temperature field at the outlet of small gas turbine engine combustion chambers
Lukachev S.V., Abrashkin V.Y., Lansky A.M., Matveev S.G.
New technologies implemented in the design of a low-emission combustion chamber of a gas-turbine unit
Fedorchenko D.G., Tsybizov Y.I., Tyulkin D.D., Vorotyntsev I.E., Zherelov D.A., Dulov A.S., Smelov V.G., Sotov A.V., Agapovichev A.V.
Analisys of experimental combustion chambers fire tests for LRE with cooling by liquid oxigen for "DM" type booster
Smolentsev A.A., Strizhenko P.P.
Methodology of optimization of parameter of matching the combustion chamber and turbine joint operation
Grigoriev A.V., Golubchikov P.P., Ilushin M.Y., Rudakov O.A., Solovieva A.V.
Development of a new collector device for gas turbine engine afterburner
Teslya D.N., Mayatsky S.A., Grasko T.V.
Influence of the burner form on the combustion chamber outlet temperature field ripple for different modes of operation of gas turbine engines
Markushin A.N., Baklanov A.V.
Modeling of propane combustion processes in case of converting a GTE combustion chamber to gaseous fuel
Matveev S.G., Lanskiy A.M., Orlov M.Y., Abrashkin V.Y., Dmitriev D.N., Zubrilin I.A., Semenov A.V.
Experimental investigations of fluid atomization by model frontal devices of combustion chambers
Vasilyev A.Y., Sviridenkov A.A., Tretyakov V.V.
Formulas of reducing engine environmental performance and combustion characteristics to standard atmospheric conditions
Grigoriev A.V., Kosmatov A.A., Rudakov O.A., Solovieva A.V.
Tests of the low emission combustion chambers compartment with pressure and pressure–air assist atomizers
Maslov V.P., Mashinistova N.P., Sviridenkov A.A., Jagodkin V.I.
Interconnection of propagation velocity and electrical conductivity of flame in ICEs
Ivashin P.V., Ramazanov M.P., Tverdokhlebov A.Y., Shaikin A.P., Yasnikov I.S.
Mathematical model for calculating pressure in a pulsating combustion chamber
Solodovnikov A.V., Odentsov D.A., Kravtsov E.V., Golubyatnik V.V., Shcheblykin D.A.
Unstady heat-mass-transfer and fuel distributions in flows downstream the gas-dynamic flame holder
Tretyakov V.V., Sviridenkov A.A.
Investigation of the causes of crack origination in the inner casing of NK-86 gas turbine engine combustion chamber
Kocherova Е.Е.
Specifying the dimensions of the reverse current area of a 3-D gas-turbine engine combustion chamber model using the ANSYS FLUENT software
Biryuk V.V., Orlov M.Y., Zubrilin I.A., Sinegovskiy Y.A., Krivtsov A.V.
Aspects of the numerical method calculating thermogazodynamic lrest based on not perfect passing of workflows in the combustion chamber
Silyutin M.V., Shustov S.A.
Working out of the design of the chamber of combustion of engine NK-14ST-10 with modular torches
Kocherov E.P., Rosljakov A.D., Tsibizov J.I.
Characteristics of a fuel spray downstream the pressure atomizers under high pressure in the combustion chamber
Sviridenkov A.A., Tretyakov V.V.
Modeling of fuel vaporization and mixing processes in combustion chamber
Tretiyakov V.V.
Experience in the development of 11Д58MФ liquid rocket engines
Smolentsev A.A.
Approximate correlative-spectral analysis of temperature patterns of combustion chambers
Prokhorov S.A., Ilinsky S.A., Aleksandrova T.G., Solovyova Y.V.
Thermal state of combustor can elements
Grechishnikov O.V., Ostapets I.I., Roslyakov A.D., Tsybizov Y.I.
The influence of burner design on the characteristics of the combustion chamber with gaseous fuels
Markushin A.N., Baklanov A.V., Tsyganov N.E.
Experimental development of the LRE with CCCM nozzle’s extension
,
Technical solutions of NOx decrease in traditional combustion chamber of GTE NK-16ST
Markushin A.N., Merkushin V.K., Byshin V.M., Baklanov A.V.
Development of a generalized model of heat-mass transfer between fuel drops and gas stream with reference to gas turbine engine combustion chambers
Tretyakov V.V., Sviridenkov A.A.
Development of an algorithm of design calculation of a combustion chamber for microturbine electric power plants
Matveev S.G., Abrashkin V.Y., Orlov M.Y., Lansky A.M., Makarov N.S., Matveev S.S., Anisimov M.Y.
Conditions of compatibility of compressor and turbine used as part of a gas generator required to ensure turbine operability
Grigoriev A.V., Ilyushin M.Y., Mitrofanov V.A., Rassokhin V.A., Rudakov O.A., Solovieva A.V.
Theoretical and experimental studies of a gas stamping device with a piston pressure multiplier
Botashev A.Y., Bayramukov R.A.
Method of calculating the thickness of the combustion chamber of a liquid rocket engine made with the use of innovative technologies and materials
Krivonogov A.V.
Analysis of combustion models applicability for designing combustion chamber with a large number of nozzles
Mingazov B.G., Yavkin V.B., Sabirzyanov A.N., Baklanov A.V.
Fuel spraying and mixing in a simulated combustion chamber in the presence of air flow precession
Sviridenkov A.A., Tretyakov V.V.
Modeling of intrachamber processes in an oxygen-hydrogen thruster
Vaulin S.D., Salich V.L.
On plasma support of fuel burning in a combustion chamber of a gas-turbine facility
Bulaeva M.N., Kravchenko I.V., Riaby V.A., Tkachenko D.P.
Optimization of design diffuser of GTE combustion chamber with using CAE-systems
Orlov M.Y., Matveev S.S., Zinkovskiy V.S.
Peculiarities of application of biofuel mixture in combustion chambers of modern gas turbine engines
Vasilyev A.J., Medvedev R.S., Chelebyan O.G.
Development of advanced low thrust rocket engines with ecologically friendly propellants
1 1., 1 1., 1 1.
Simulation of drop coagulations in swirled time dependent streams with reference to gas turbine engine combustion chambers
Sviridenkov A.A., Tretyakov V.V.
Analyzing the quality of preparing fuel-air mixture and its influence on NOx in a low emission gas turbine engine combustion chamber
Markushin A.N., Baklanov A.V.
Homogeneous burners of two-staged combustion chambers
Grechishnikov O.V., Ostapets I.I., Roslyakov A.D., Tsybizov Y.I.
Comparative analysis of fuel distribution downstream of the gas-dynamic flame holder with various methods of injection
Tretyakov V.V., Sviridenkov A.A.
Some results of experimental refining of a constant volume valve combustion chamber
Bogdanov V.I., Kuznetsov S.P.
Manipulate pulsed detonation engine
1 1., 1 1.
Test benches for researching the processes and operational development of low emission gas turbine engine combustion chambers
Markushin A.N., Baklanov A.V.
1 - 75 of 75 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies