Search

Issue
Title
Authors
Experimental research of wall boundary flow formation in the combustion chamber of a small gas generator with self-igniting fuel components
Shustov S.A.
Programme realization of mathematical operations of flow multiplexing and demultiplexing for network models
Bakhareva N.F.
Abrasive flow machining of specimens of cast billets from austenomartensitic steel with high-viscosity media
Levko V.A., Teryaev N.S., Litovka O.V., Ivanov P.A.
Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process
Matveev V.N., Goriachkin E.S., Popov G.M., Baturin O.V., Kudryashov I.A.
Investigation of factors affecting the accuracy of the flow rate of liquid, oil and gas
Plesovskikh K.Y.
Mathematical modelling and parametric research of flow of the twisted turbulent single-component stream of the propulsive mass in the trance- and supersonic areas of Laval nozzles
1 1., 1 1.
Development of hydraulic devices with elastic regulating elements
Berestovitsky E.G., Gladilin Y.F., Pyalov N.V.
Investigation of 11D428А-22 thruster operation dynamics with bellows flow stabilizer
Beshenev Y.A., Volkov A.V., Kazankin F.A.
Test verification of flow stabilizer calculated parameters provided flow stabilization of propellant in wide range of input parameters
Beshenev Y.A., Volkov A.V., Kazankin F.A.
Approximate models of air transport queueing systems with partial mutual assistance between service channels
Romanenko V.A.
Investigation of hydraulic and vibroacoustic characteristics of a prospective valve with an elastic tubular element used as the working body
Kryuchkov A.N., Romashov N.N., Ermilov M.A., Balyaba M.V.
Economic-mathematical model of the enterprise balance budget on the basis of operational and financial budgets
Esipova O.V.
Validation of the “stage – diffuser” system numerical study and its use for design modernization
Cherkasova M.G., Semakina E.Y., Chernikov V.A.
Formation in the channels of the block catalyst the micro vortex gas flows with intense twist
Knysh Y.A., Zibizov Y.I., Dmitriev D.N., Gorshkalev A.A.
Gasdynamic and strength improvement of the axial flow turbine of a helicopter gas turbine engine
Goriachkin E.S., Popov G.M., Matveev V.N., Shcherban A.I., Kudryashov I.A., Melnikov S.A.
Experimental study of swirled gas flow by the particle image velocimetry method
Knysh Y.A., Redkin Y.S., Dmitriev D.N.
Model of managerial decision making by enterprise of the trade and marketing network in collaboration with the industrial complex
Astapov S., Bogatyrev V.D.
Formation of microvortex gas flows in channels of a block catalyst with coplanar channels
Knysh Y.A., Tsibizov Y.I., Dmitriev D.N., Gorshkalev A.A.
Calculation of flow characteristics of liquid fuel supplied through pressure jet atomizers of small-sized gas turbine engines
Gurakov N.I., Zubrilin I.A., Hernandez Morales M., Yakushkin D.V., Didenko A.A., Matveev S.G., Komisar Y.V.
Experimental research of the possibility of heat transfer enhancement in gas dynamic energy separation process
Popovich S.S., Vinogradov Y.A., Strongin M.M.
Variations in free cross-sectional areas of the phases of double-phase flows under changes of gaseous phase rate of flow
Levkin Y.S.
Conditions of compatibility of compressor and turbine used as part of a gas generator required to ensure turbine operability
Grigoriev A.V., Ilyushin M.Y., Mitrofanov V.A., Rassokhin V.A., Rudakov O.A., Solovieva A.V.
Dynamics of feed water flow rate control system with low- noise regulator
Berestovitskiy E.G., Kizilov P.I., Kruchkov A.N., Pialov N.V.
Design of schemes of financial and material flows in enterprise supply chains
Astapov S.V., Bogatyrev V.D.
Numerical simulation of the thermal-stress state of an highpressure compressor rotor with consideration for secondary flows
Temis Y.M., Selivanov A.V., Yurchenko G.G.
Numerical simulation of low liquid flow in a mixer consisting of two centrifugal swirlers
Semkin E.V.
Research of liquid outflow from low-emission swirl injectors of a low-thrust liquid rocket engine
Semkin Y.V.
The influence of 3g and 4g vibration on the disperse structure of low-frequency and medium-frequency oscillation
Levkin Y.S., Lushkin I.A.
Optimization of the schedule of financing of the investment project on graphs of works for oil and transport branches
Morozova S.A.
Practical application of the methodology of mature production process for pitomated work flow management technology
Puzakina E.J., Larin S.N.
Development of yield criteria for the calculation of forming high-textured anisotropic blanks
Grechnikov F.V., Yerisov Y.A.
Drag function for the striking element sphere-class on subsonic velocity
Romanenko I.V., Crawford K.R., Mitiukov N.W., Busygina E.L.
Peculiarities of gas temperature field formation at the exit of small-sized gas turbine engine combustion chambers
1 1., 1 1., 1 1.
The calculated study of fluid structure in a hub an axial aviation turbine
1 1., 1 1.
Analysis of schemes and methods of hydrodynamic cleaning of hydro-fuel system units
Sanchugov V.I., Reshetov V.M.
Thermal state of a groind-use gas turbine engine stator
Grechishnikov O.V., Balakin A.Y., Roslyakov A.D.
Compressor blade erosion modeling
Gumerov A.V., Akmaletdinov R.G.
Efficiency of aft diffusers in vacuum systems of test benches for high-altitude firing tests of low-thrust liquid rocket engines
Galperin R.N., Gulyaev Y.I., Ivashin Y.S., Nigodjuk V.E., Ryzhkov V.V., Sulinov A.V.
Research of hydrodynamic processes in the lubrication system of gas turbine engines
Gulienko A.I., Shchurovskiy Y.M.
Optimization model of financing production of an industrial enterprise of space-rocket industry
Inozemtsev V.V.
Development of methods of modeling and computer-aided design of compressors
Krivosheev I.A., Rozhkov K.E.
Stabilization of a pilot-operated gas pressure control valve by placing a throttle at the inlet
Stadnik D.M., Sverbilov V.Y., Makaryants G.M., Makaryants M.V.
The analysis of real thermodynamic cycle of bypass engine with mixing
Medvedev V.V.
Simulation of aircraft multistage axial turbine working processes taking into account over-shroud leakage flows and blading inflows
Baturin O.V., Popov G.M., Kolmakova D.A.
Lift of the airfoil with spoiler
Redkina K.V., Frolov V.A.
Research of dynamics of initiation, propagation, growth and closure of bubble cavities and a supercavity in a pipe with decontaminated liquid under hydraulic impacts
1 1.
Research of a seal work as an element of the air engine support
Vinogradov A.S., Rempel A.P.
Stability of swirl flows with radial density gradient
Anchikov D.A., Gusev V.A., Zavershinskii I.P., Makaryan V.G., Sugak S.S.
Method of calculation and analysis of gas flow aerodynamic indices in a vortex wind power plant
Biryuk V.V., Uglanov D.A., Gorshkalev A.A., Bolshov D.V., Krasnorutskiy A.S., Lapshina V.A., Chertykovtsev P.A.
Gas-dynamic losses in the flow part of the channel charge of a solid-propellant rocket engine
A. N. Sabirzyanov A.N., Khamatnurova C.B., Kuzmin V.V.
Mixing processe research in 10…15 N thrusters
Salich V.L., Semkin E.V.
Flow conditioning downstream a pressure collector
Kalaev V.A., Khorobrov S.V.
Experimental research of the closed-type gas-dynamic mixer
Lepeshinsky I.A., Reshetnikov V.A., Zarankevich I.A., Istomin E.A., Antonovsky I.V., Guzenko A.A.
Early detection of vibration behaviour of aircraft engine multistage axial compressor in pre-surge states during rig testing
Khorikov A.A., Danilkin S.Y., Mazikina T.I.
Results of numerical modeling of two-phase liquid / gas flow on the basis of a simplifield model of oil chamber
Lisitcin A.N., Badernikov A.V., Pechenik E.V.
Peculiarities of solving three-dimensional problems of flow about a launch vehicle with large nose fairings using the ANSYS FLUENT software
Kharitonova A.N., Shakhov V.G.
Robust research of the fuzzy logic controllers using a fuel flow control loop of the gas-turbine engine as an example
Chicherova E.V.
Approaches to the evaluation of fuels for hypersonic engines
Sergeev S.M., Petrukhin N.V.
Drag function for the striking element arrow-class on subsonic velocity
Ganziy Y.V., Salakhov M.M., Mitiukov N.W., Busygina E.L.
Analysis of temperature separation efficiency in vortex gas flows
Biryuk V.V., Kurnosov N.Y., Tarnopolsky A.V.
Research of the fan blades flutter on the stalling airflow mode
Khorikov A.A., Danilkin S.Y.
Influence of turbulence models on calculated values of aircraft aerodynamic properties
Elisov N.A., Ishkov S.A., Shakhov V.G.
Suppression of gas-dynamic self-oscillations in the outflow line of a gas control valve
Balyaba M.V., Ermilov M.A., Kryuchkov A.N., Shabanov K.U.
Application of the invariant plastic flow theory for mathematical modeling of the processes of testing specimens under complex elastic-plastic deformation
Temis Y.M., Alkhimov D.A., Martynova A.D.
Optimization economic and mathematical model of cash flows for the investment credit of a small business
Bondarchuk K.L.
Experimental investigation of a small-sized centrifugal compressor for a closed-brayton cycle gas turbine power system
Arbekov A.N., Novitskiy B.B.
Investigation of fluid flow in the gap between eccentric cylindrical and conical surfaces
Bondareva M.V., Korzhov E.N.
Mixture modelling in a swirle flow in the ANSYS CFX program
Krasheninnikov S.V., Savchenko O.V.
Vortex effect and intensification of heat and mass transfer in cell energy technology
Piralishvily S.A., Veretennikov S.V.
Physical principles of hydrodynamic non-stationarity effect on turbulent flow
Krayev V.M., Tikhonov A.I.
Experimental analysis of flow separation in low thrust rocket engine nozzles with a profiled supersonic part of the nozzle
Shustov S.A.
Influence of the turbine ignition, flame tube suspension and nozzles on the combustion chamber characteristics
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Calculation of lubricant flow in the slide bearing of the aviation engine reducer
Siluyanova M.V., Fertikov A.О.
Numerical modeling and experimental research of a two-phase liquid- gas ejector with a profiled supersonic nozzle
Lepeshinsky I.A., Reshetnikov V.A., Zarankevich I.A.
Stewart platform pneumatic control system development and characteristic research
Greshnyakov P.I.
Analysis of the thermal state of aircraft engine supports
Vinogradov A.S., Badykov R.R., Fedorchenko D.G.
Computation of tip clearance effect on characteristic of low pressure compressor of engine RD-33
Abdelwahid M.B., Fedorov R.M., Fedechkin K.S.
Experimental study of a power absorber of accelerated fluid flow in pipelines
Gimadiev M.A., Gimadiev A.G.
Thermal state of combustor can elements
Grechishnikov O.V., Ostapets I.I., Roslyakov A.D., Tsybizov Y.I.
Experimental investigation of turbulence of influence of the compressor’s out flow parameters on the hydraulics parameters resistance of separation diffuser of combustion chamber
Guryanova M.M.
Analysis of the structure of the third variation of roll moment coefficient during hypersonic flow about bodies of revolution with small spatial surface variations on the basis of differential locality hypothesis method
Danilkin V.A., Kostin G.F., Mokin Y.A., Tikhonov N.N.
Determining flow regimes around rocket boosters on a part of the launch orbit
Kharitonova A.N.
Simulation of turbulent flow in simple and complex diffuser channels
Davletshin I.S., Mingazov B.G., Yavkin V.B., Kesel B.A., Voskoboynikov D.V.
Investigation of the thermal regime of microsatellite optoelectronic telescopic complex under operating conditions
Tsaplin S.V., Bolychev S.A.
Mathematical model of anisotropic elastic-plastic material
Grechnikov F.V., Yerisov Y.A.
Research of the zone of plasmachemical reactions in a supersonic air flow in the presence of nonquilibrium electric discharge
Yefimov B.G., Ivanov V.V., Inshakov S.I., Skvortsov V.V., Starodubtsev M.A.
Elimination of gas dynamic resonance modes of vibration loads of gas distribution station pipeline fitting
Shabanov K.U., Kryuchkov A.N., Ermilov M.A., Balyaba M.V.
Switched-reactance control of pressure and flow as a way to increase energy efficiency of hydraulic drives – a state-of the-art review
Sverbilov V.Y., Stadnik D.M., Iliukhin V.N., Shamin D.V.
Analysis of the causes of auger-centrifugal pump bearing destruction
Gafurov S.A., Rodionov L.V., Kryuchkov A.N., Makaryants G.M., Shakhmatov Y.V.
Peculiarities of application of biofuel mixture in combustion chambers of modern gas turbine engines
Vasilyev A.J., Medvedev R.S., Chelebyan O.G.
The development of mathematical model of hydrodynamics of "tpapped" volume in the gear pump
1 1., 1 1., 1 1., 1 1., 1 1.
Analysis of transverse force in the case of flow about bodies of revolution at high angle of attack
Gumerov A.V., Gumerova L.V., Balzannikova Y.M.
Study of the mechanism of flame stabilization in aaluminum-air mixture
Egorov A.G., Tizilov A.S.
Process of forming mirror-shaped relief plates of folded structure
Khaliulin V.I., Gimadiev R.S., Markovtsev V.A., Levshonkov N.V.
Development of the active gas generator for high altitude firing test benches
Salich V.L.
Complex approach to aerodynamic design of inlet ducts with submerged vortex-free air intakes
Kornev A.V., Boychuk I.P.
The analysis of methods of protection of onboard equipment of space vehicles from influence of factors of the electrostatic discharge
Kostin A.V.
Research of current and power interchange of swirled fluid streams in a hydraulic heat gentrator
Belozertsev V.N.
Numerical study of the characteristics of a double-circuit vortex tube in a stationary and a nonstationary settings
Piralishvili S.A., Sokolova O.A.
Simulation of operaiting cycle by Petry nets
Zelenskiy V.A., Konnov V.P., Schodro A.I.
1 - 100 of 116 Items 1 2 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies