Search

Issue
Title
Authors
Mathematical model of fuel sloshing in the measuring channel of the fuel expenditure control system
Kryukov Y.A.
Approximation of forces of fluid film bearing lubricating layer using machine learning methods
Kazakov Y.N., Stebakov I.N., Shutin D.V., Savin L.A.
Verification of a transonic stage CFD model for assessing the erosion wear influence on the operation of the axial compressor
Blinov V.L., Zubkov I.S.
Development of magnetic fluid dampers of aicrafts chassis elements
Averianov G.S., Belkov V.N., Korchagin A.B., Agarin M.Y.
Modelling changes of condition of aircraft hydraulic system working fluid
Gareyev A.M.
Using the theory of dynamic analogies for modelling automated manufacturing systems
Gareyev A.M., Koptev A.N., Gareyev T.M.
Simulation of fluid contamination control process
Gareyev A.M.
Comparative analysis of turbulence model influence in numerical simulation of an experimental radial compressor stage
Eremenko V.V., Mikhailov A.E., Mikhailova A.B., Goryukhin M.O., Krasnoperov D.G.
Proactive maintenance of hydrosystems on the basis of the analysis of parameters of particles of contamination of hydraulic fluid
Kovalev M.A.
Gas-dynamic losses in the flow part of the channel charge of a solid-propellant rocket engine
A. N. Sabirzyanov A.N., Khamatnurova C.B., Kuzmin V.V.
Fluctuations of liquid fuel in tanks with oil recovery units
Dyachenko M.I., Duy Hung N., Temnov A.N.
Strength analysis of internal combustion engine elements by using ANSYS with taking into account heat processes in the combustion chamber
Biryuk V.V., Gorshkalev A.A., Kayukov S.S., Saigakov E.A.
Increasing the efficiency of low-temperature power plants by selecting the optimal working fluid of the auxiliary circuit
Eliseev I.A., Tochenov V.V., Panshin R.A.
Prospective lines of improving the process of evaluating the technical condition of aircraft hydraulic system working fluid
Koptev A.N., Gareyev A.M., Popelnyuk I.A.
Examination of the theoretical possibility of creating a vernier electrorocket engine
Baigaliev B.E., Chernoglazova A.V., Tumakov E.A., Temnikova S.V.
Designing of the aviation engine's hydrodynamic bearing
Parovay Y.F., Gordeev V.B., Falaleev S.V.
CFD-based modeling of oil ang gas journal bearings using commercial software packages
Pugachev A.O., Ravikovich Y.A., Ermilov Y.I., Kholobtsev D.P., Matushkin A.A.
Special aspects of numerical simulation of a two-stage axial-flow compressor with defective blades
Blinov V.L., Zubkov I.S., Iskortsev E.Y., Belyaev O.V., Plishkin P.I.
Peculiarities of applying Darcy’s law in research and development of hybrid engine blades for an advanced aerospace plane
Baigaliev B.E., Tumakov A.G., Tumakov E.A.
Experimental study of a power absorber of accelerated fluid flow in pipelines
Gimadiev M.A., Gimadiev A.G.
Analysis of characteristics of electric propulsion systems intended for carrying out maneuvers of maintenance of low Earth working orbit of small satellites
Salmin V.V., Volotsuev V.V., Nikitin A.V.
System-mathematical simulation of engine air hydraulic power supply
Goryunova N.R., Goryunov A.A.
Influence of argon, propane and ethane viscous dissipation on the thermal state of a porous plate
Baygaliev B.E., Tumakov A.G., Tumakov E.A., Ibragimov A.I.
Finite element techniques for pipe system vibroacoustical characteristics modelling
Mironova T.B., Prokofiev A.B., Shorin V.P.
Method of calculating dynamic designs of space launch vehicles for designing systems of stabilization of their motion
Lobanov V.A.
Peculiarities of modeling the work process in a low-pressure compressor of a gas turbine plant
Matveev V.N., Popov G.M., Goryachkin E.S., Smirnova Y.D.
Selection of project structure for nanosatellite propulsion system
Belokonov I.V., Ivliev A.V., Bogatyrev A.M., Kumarin A.A., Lomaka I.A., Simakov S.P.
Research of current and power interchange of swirled fluid streams in a hydraulic heat gentrator
Belozertsev V.N.
Method to improve accuracy mass measurement fluid in the tank
Solntseva A.V., Skvortsov B.V., Borminsky S.A.
Experimental acknowledgement of adequacy of the developed mathematical model of instant giving of the liquid by the gear pump
1 1., 1 1., 1 1., 1 1., 1 1.
Process of coating the inner surface of an inclined pipe and its mathematical modeling
Skvortsov B.V., Zaretskaya M.I., Zaretskiy I.S., Zhivonosnovskiy P.A.
ASMTurbC method of autonomous statistical modeling of diffusion turbulent combustion and the results of its testing
Nuzhnov Y.V.
Control of the aircraft hydraulic system technical conditions on the basis of monitoring viscidity values and purity level of fluid power
Kovalev M.A., Borodkin G.V.
Set-theory model of the aircraft hydraulic system working fluid state
Koptev A.N., Gareyev A.M., Popelnyuk I.A.
Investigation of the seizing mechanism of aviation hydraulic drive spool–and–sleeves
Gareyev A.M., Popelniuk I.A.
Problems and solutions of using computer technologies in designing of combustion chambers GTE
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Development of the finite element model of vibroacoustical characteristics of pipe system
Mironova T.B., Prokofiev A.B., Shahmatov E.V.
1 - 37 of 37 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies