Search

Issue
Title
Authors
Assessment of the possibility of shortening the landing distance of maneuverable aircraft
Strelets M.Y., Tarasov A.Z., Grishin I.A.
Application of flame electro conductivity for combustion analysis in spark ignition ICE
Ivashin P.V.
Complex of algorithms for fast determination of the parameters of motion of high-speed vessels in the digital signal processing system of a space synthetic aperture radar
Gusev S.N., Moroz A.V.
Protocols of stitching image strips formed by optoelectronic converters and their application
Kuznetsov P.K., Martem’ianov B.V., Miatov G.N., Yudakov A.A.
Choosing a program for controlling the deployment of an orbital tether system with deployment speed limitations
Ishkov S.A., Xiaoye X., Filippov G.A.
Choice of design characteristics of «garbage collector» spacecraft with a low-thrust electrojet engine
Ishkov S.A., Filippov G.A.
The results of determination angular rate and quasistatic microaccelerations the Foton S/C on the onboard measurements
1 1., 1 1., 1 1.
Agreement between criterial equations of heat transfer in the process of cooling aluminium ingots and experimental data
Gorshenin A.S., Krivosheev V.E.
System of differential equations of aircraft spatial motion dynamics with arbitrary tensor of inertia and center of gravity position
Vereshchikov D.V.
Dependence of methane laminar flame propagation speed on the pressure and initial temperature
Lukachev S.V., Matveev S.G., Zubrilin I.A., Sigidaev A.V.
Analysis estimation of pulse jet engine operation in detonation mode
Seyfetdinov R.B., Seyfetdinov M.B., Gafurov S.A., Shakhmatov E.V.
Theoretical basis of directed energy transmission pulses in stationary and moving media
Skvortsov B.V., Skvortsov D.B., Malysheva–Strojkova A.N.
Influence of the loading parameter on the efficiency ofa three-stage turbine of turbojet bypass engine
1 1., 1 1.
Research of growth rate of fatigue cracks in aluminum AK6 alloy depending on tension characteristics in the field of their progress
Aistov I.P., Vansovich K.A., Kruchkov A.N.
Method of preliminary solution of the problem of space robot navigation by onboard astronomical measurements using the butterworth filter
Ananenko V.M., Golyakov A.D., Kalabin P.V.
Influence of fluctuation velocity on the electric conductivity of hydrocarbon flames
Shajkin A.P., Galiev I.R., Bobrovsky A.V.
Method and apparatus for evaluating the efficiency of energy transfer from combustion products to abrasive particles at the exit of a sand blaster nozzle
Kornilin D.V., Medvedev M.V.
Determining the angle of advance of ignition when switching from petrol to gas depending on fuel mixture burning rate
Shishkov V.A.
Assessing weight efficiency of carrier rockets launched from dirigibles and airplanes
Kurenkov V.I.
Interconnection of propagation velocity and electrical conductivity of flame in ICEs
Ivashin P.V., Ramazanov M.P., Tverdokhlebov A.Y., Shaikin A.P., Yasnikov I.S.
Experimental research of the closed-type gas-dynamic mixer
Lepeshinsky I.A., Reshetnikov V.A., Zarankevich I.A., Istomin E.A., Antonovsky I.V., Guzenko A.A.
The concept of matching the joint operation of the combustion chamber, the compressor and the turbine
Grigoriev A.V., Golubchikov P.P., YIlushin M.Y., Rudakov O.A., Solovieva A.V.
Mathematical modeling of heat exchange on air cooling of a number of aluminum ingots
Gorshenin A.S.
Development and study of the designs of sprayers with increased speed for internal combustion engine (ice)
, ,
Study of the mechanism of flame stabilization in aaluminum-air mixture
Egorov A.G., Tizilov A.S.
The possibility of ultrasonic testing of compressor blades after exploitation and repair
Motova E.A., Nikitina N.Y.
Analysis of the accuracy of Earth remote sensing satellite angular motion control and track guidance during route observation intervals
Galkina A.S., Platoshin I.V.
Research of current and power interchange of swirled fluid streams in a hydraulic heat gentrator
Belozertsev V.N.
A hot-wire anemometric transducer of airflow mass rate
Nikolayev V.N.
Study of flow characteristics in straight-flow combustion chamber with sudden expansion
Egorov A.G., Zotkin V.I., Ivanin S.V.
Conditions of compatibility of compressor and turbine used as part of a gas generator required to ensure turbine operability
Grigoriev A.V., Ilyushin M.Y., Mitrofanov V.A., Rassokhin V.A., Rudakov O.A., Solovieva A.V.
Experimental and theoretical research of continuous motion of rotor on anisotropic gapped elastic support
Nikiforov A.N., Panovko G.Y., Shokhin A.Y.
Modeling orbital tether system deployment with limitations on the deployment speed
Ishkov S.A., Filippov G.A., Xiaoye X.
Experimental study of hydrocarbon fuel combustion in the air
Sergeev S.M., Petrukhin N.V., Masyukov M.V.
Analysis and ballistic design of a medium-caliber system with an attached camera of accelerating
Safronov A.I., Azovsky V.M., Zorkin V.A., Chirkunova N.V.
Model of varigrained particle stream moving by hypersonic combustion materials investigation
Bulanova E.A., Pervishin A.N.
Analysis of control programs and climb paths of the hypersonic first stage of an aerospace system
Balakin V.L., Krikunov M.M.
Efficiency of using electric propulsion engines for the task of keeping in a near-circular orbit
Ishkov S.A.
Determining the boundaries of ignition of aluminum particle aerosuspension in a high-velocity airflow
Egorov A.G., Tizilov A.S.
Optimal distribution of turboprop engine free energy between the screw and the jet with mass characteristics taken into account
Grigoriev V.A., Prokaev A.S.
Active noise control systems based on acoustic particle velocity measurements
Gasparov M.S., Kharitonov M.Y.
Process of coating the inner surface of an inclined pipe and its mathematical modeling
Skvortsov B.V., Zaretskaya M.I., Zaretskiy I.S., Zhivonosnovskiy P.A.
Relationship between carbon concentration in a fuel and characteristics of flame propagation with a magnitude of ion current
Shaykin A.P., Budaev S.I., Galiev I.R.
Mathematical modeling and investigation of the process of thermal theatment of aluminum ingots on the basis of regulated convective heat transfer
Gorshenin A.S., Krivosheev V.E.
Optimization of thermomechanical parameters of high speed forging of titanium alloys
Khaimovich A.I., Mikheyev V.A.
Flame propagation velocity and ionization in burning gasoline and methane with addition of hydrogen
Shaykin A.P., Ivashin P.V., Galiev I.R.
1 - 46 of 46 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies