Assuring performance characteristics of gas-turbine engine parts and assemblies using electrospark doping
- Authors: Denisov L.V.1, Boytsov A.G.1, Siluyanova M.V.1
-
Affiliations:
- Moscow Aviation Institute (National Research University)
- Issue: Vol 17, No 2 (2018)
- Pages: 58-67
- Section: AIRCRAFT AND SPACE ROCKET ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/6219
- DOI: https://doi.org/10.18287/2541-7533-2018-17-2-58-67
- ID: 6219
Cite item
Full Text
Abstract
The article describes surface hardening of aircraft engine titanium-alloy hydraulic cylinder face using the method of electro-spark doping by low-energy discharges. Graphite electrodes were used to provide functional behavior of the cylinder surface layer. The carbon oxide layer formed has a highly dispersed structure of a complex composition (with particles of titanium carbide, titanium oxide, graphite), 3-10 micron thick, characterized by high hardness and sliding properties. Graphite electrode alloying practically does not change the part dimensions. Subsequent diamond burnishing of the hardened surfaces decreases the value of the friction coefficient and surface roughness. Healing of defects and micro-cracks improves the fatigue resistance of the part. The developed technology makes it possible to assure the characteristics required of hydraulic cylinder work surfaces and increase their life.
About the authors
L. V. Denisov
Moscow Aviation Institute (National Research University)
Author for correspondence.
Email: gx700fl@mail.ru
Senior Lecturer, Department of Technology of Production and Maintenance of Aircraft Engines
Russian FederationA. G. Boytsov
Moscow Aviation Institute (National Research University)
Email: agboytsov@mail.ru
Doctor of Science (Engineering), Professor, Department of Technology of Production and Maintenance of Aircraft Engines
M. V. Siluyanova
Moscow Aviation Institute (National Research University)
Email: dc2mati@yandex.ru
Doctor of Science (Engineering), Professor, Department of Technology of Production and Maintenance of Aircraft Engines
Russian FederationReferences
- Boytsov A.G., Kovalev A.P., Novikov A.S., Paykin A.G., Khvorostukhin L.A. Protsessy mekhanicheskoy i fiziko-khimicheskoy obrabotki v proizvodstve aviatsionnykh dvigateley: uch. posobiye [Processes of machining and physicochemical treatment in aircraft engine production]. Moscow: Bauman Moscow State Technical University Publ., 2007. 584 p.
- Boytsov A.G., Mashkov V.N., Smolentsev V.A., Khvorostukhin L.A. Uprochneniye poverkhnostey detaley kombinirovannymi sposobami [Hardening of part surfaces with the use of combined methods]. Moscow: Mashinostroenie Publ., 1991. 144 p.
- Grachev M.V., Denisov L.V., Boytsov A.G. Phase composition and element concentration in surface layer after ESD. Trudy GOSNITI. 2010. V. 106. P. 47-49. (In Russ.)
- Siluyanova M.V., Kuritsyna V.V., Boytsov A.G. Modeli i metody tekhnologicheskogo audita naukoyemkikh proizvodstv [Models and methods of process audit in high-tech industries]. Moscow: MAI Publ., 2017. 160 p.
- Silchenko O.B., Siluyanova M.V., Nizovtsev V.E., Klimov D.A., Kornilov A.A. On the prospects of application of nanostructured heterophase polyfunctional composite materials in engine building industry. Voprosy materialovedeniya. 2018. No. 1(93). P. 50-57. doi: 10.22349/1994-6716-2018-93-1-50-57 (In Russ.)
- Dmitriev L.M., Novikov S.V., Siluyanova M.V. A concept for optimizing vulnerability of production and technological potential of a Russian aircraft industry enterprise against supply adversities. Aviation Industry. 2018. No. 1. P. 58-62. (In Russ.)