Flow conditioning downstream a pressure collector
- Authors: Kalaev V.A.1, Khorobrov S.V.1
-
Affiliations:
- Joint-Stock Company “I.I. Polzunov Scientific and Development Association on Research and Design of Power Equipment”
- Issue: Vol 16, No 4 (2017)
- Pages: 72-81
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/5616
- DOI: https://doi.org/10.18287/2541-7533-2017-16-4-72-81
- ID: 5616
Cite item
Full Text
Abstract
In this paper, incompressible turbulent flow downstream a symmetric pressure collector with fixed outlet pipe length is studied. The goal is to obtain smooth axial velocity profile at the outlet plane. Finite-volume RANS equations with a SST turbulence model are used to describe the motion of fluid. The solution is carried out with the ANSYS FLUENT solver. The transitional part in the T-junction pipe is redesigned to straighten the flow, series of conical confusers and plate grids are employed to reduce both the size of the recirculation area and the magnitude of rotational velocity. The final geometry is tested under asymmetric inlet boundary conditions and its efficiency is shown. CFD results are compared to literature data in terms of pressure drop.
Keywords
About the authors
V. A. Kalaev
Joint-Stock Company “I.I. Polzunov Scientific and Development Association on Research and Design of Power Equipment”
Author for correspondence.
Email: general@ckti.ru
Doctor of Science (Engineering)
Deputy General Director – Project Manager
S. V. Khorobrov
Joint-Stock Company “I.I. Polzunov Scientific and Development Association on Research and Design of Power Equipment”
Email: svyatoslav.khorobrov@gmail.com
CFD engineer, Department of Advanced Development
Russian FederationReferences
- GOST 8.586.2–2005. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 2: Orifice plates. Moscow: Standartinform Publ., 2007. 40 p. (In Russ.)
- Quazzane A.K., Benhadj R. Flow Conditioners Design and Their Effects in Reducing Flow Metering Errors. Sensor Review. 2002. V. 22, Iss. 3. P. 223-231. doi: 10.1108/02602280210433061
- Zanker K.J. The Development of a Flow Straightener for Use with Orifice-Plate Flowmeters in Disturbed Flow. Flow Measurement in Closed Conduits (Proceedings of symposium at National Engineering Laboratory). 1962. P. 395-415.
- Sawchuk B.D., Sawchuk D.P., Sawchuk D.A. Flow Conditioning and Effects on Accuracy for Fluid Flow Measurement. American School of Gas Measurement Technology. 2010.
- Aleksandrov I.B., Kurkin E.I., Lukyanov O.E., Sadykova V.O., Shakhov V.G. Computational Simulation of the Flow Formation in the Circular Pipe after the Honeycomb. Izvestiya Samarskogo nauchnogo tsentra RAN. 2016. V. 18, no. 4. P. 115-119. (In Russ.)
- Menter F.R. Best practice: scale-resolving simulations in ANSYS CFD. ANSYS Germany GmbH., 2012. 70 p.
- El Drainy Y.A., Saqr K.M., Aly H.S., Jaafar M.N.M. CFD Analysis of Incompressible Turbulent Swirling Flow through Zanker Plate. Engineering Applications of Computational Fluid Mechanics. 2009. V. 3, Iss. 4. P. 562-572. doi: 10.1080/19942060.2009.11015291
- Idel'chik I.E. Spravochnik po gidravlicheskim soprotivleniyam [Reference book on hydraulic resistances]. Moscow: Mashinostroenie Publ., 1975. 559 p.