Application of stereolithography prototypes for gas dynamic tests
- Authors: Matveev V.N.1, Shabliy L.S.1, Krivcov A.V.1
-
Affiliations:
- Samara State Aerospace University
- Issue: Vol 14, No 3-2 (2015): Special Issue
- Pages: 296-304
- Section: ISSUE WITHOUT SECTION
- URL: https://journals.ssau.ru/vestnik/article/view/2875
- DOI: https://doi.org/10.18287/2412-7329-2015-14-3-296-304
- ID: 2875
Cite item
Full Text
Abstract
Planning any pilot study brings up the question of producing test specimens. These are quite often rather complex, consisting of several individual parts put together. Test specimens are very expensive and take long time to produce using traditional technologies of production because of high accuracy required of them and absence of quantity production. Dynamically developing additive technologies (rapid prototyping) make it possible to produce plastic and metal parts of any form using a uniform technology. Therein the complexity of the part shape practically does not increase the manufacturing complexity and the need for equipment is absent or minimal. Laser stereolithography (SLA – Stereolithography Laser Additive) is one of the earliest and most precise technologies of 3D-printing. The paper presents the experience of using a prototyping machine on the basis of laser stereolithography for the production of experimental specimens for gas-dynamic investigations. On the basis of synthesis of this experience, basic requirements for similar experimental specimens are formulated: durability, rigidity and hardness, impermeability for gas or liquid, resistance to working fluid diffusion, resistance to chemically aggressive fluids (including fuels, oils). Comparison of different technologies of prototyping shows that stereolithographic models meet all listed requirements better than others.
About the authors
V. N. Matveev
Samara State Aerospace University
Author for correspondence.
Email: tdla@ssau.ru
Doctor of Science (Engineering)
Professor of the Department of the Theory of Aircraft Engines
Russian FederationL. S. Shabliy
Samara State Aerospace University
Email: shelbi-gt500@mail.ru
Candidate of Science (Engineering)
Assistant Professor of the Department of the Theory of Aircraft Engines
Russian FederationA. V. Krivcov
Samara State Aerospace University
Email: krivcov63@ramler.ru
Assistant of the Department of the Theory of Aircraft Engines
Russian FederationReferences
- Mezhkafedral'naya laboratoriya bistrogo prototipirovaniya SGAU [SSAU interdepartment laboratory of rapid prototyping]. Available at: http://mlbp.narod.ru/
- Nauchno-obrazovatel'nyy tsentr gazodinamicheskikh issledovaniy [Research-and-educational center of gas dynamic research.]. Available at: http://secfdr.ssau.ru/
- Shabliy L.S. Metod i sredstva gazodinamicheskogo proektirovaniya i dovodki vykhodnykh ustroystv tsentrostremitel'nykh mikroturbinnykh privodov. Diss. kand. tekhnicheskikh nauk [Method and facilities of gas dynamic design and refining of output devices of centripetal. microturbine drives. Candidate Dissertation in Engineering Science.] Samara, 2012. 162 p.
- Knysh Yu.A., Tsybizov Yu.I., Dmitriev D.N., Gorshkalev A.A. Formation of microvortex gas flows in channels of a block catalyst with coplanar channels. Vestnik of the Samara State Aerospace University. 2013. No. 3(41), part 1. P. 113-117 (In Russ.)
- Knysh Yu.A., Tsybizov Yu.I., Dmitriev D.N., Gorshkalev A.A. Formation in the channels of the block catalyst the micro vortex gas flows with intense twist. Vestnik of the Samara State Aerospace University. 2012. No. 3(34), part 3. P. 121-125. (In Russ.)
- Knysh Yu.A. Maloemissionnaya kataliticheskaya gorelka [Low-emission catalytic burner]. Patent RF no. 2014125978/06 (042256), 2014. (Publ. 27.11.2014)
- Tsentr Tekhnologiy FGUP «NAMI». [Center of Technologies of the “NAMI” Federal State Unitary Enterprise]. Available at: http://rp-salon.weebly.com/
- Laboratoriya lazernogo sinteza ob"emnykh izdeliy IPLIT RAN [Laboratory of laser synthesis of three-dimensional products of the Institute on Laser and Information Technologies, Russian Academy of Sciences]. Available at: http://shatura.laser.ru/Rapid/
- Matveev V.N., Shabliy L.S. Opyt osvoeniya oborudovaniya bystrogo prototipirovaniya pri izgotovlenii modeley detaley dvigateley letatel'nykh apparatov. Materialy Vseross. nauchno-tekhn. konf. «Novye materialy i tekhnologii - NMT-2008». V. 2. Moscow: MATI Publ., 2008. P. 65-66. (In Russ.)
- Shabliy L.S. Issledovanie primenimosti tekhnologii lazernoy stereolitografii dlya izgotovleniya turboprivodov. Sbornik konkursnykh dokladov VIII Vserossiyskogo molodezhnogo Samarskogo konkursa-konferentsii nauchnykh rabot po optike i lazernoy fizike. Samara: Samarskiy universitet Publ., 2010. P. 275-281. (In Russ.)
- Laboratoriya additivnykh tekhnologiy SGAU [SSAU Laboratory of Additive Technologies]. Available at: http://www.ssau.ru/struct/deps/ pdla/lat/
Supplementary files
![](/img/style/loading.gif)