Calculation of vibroacoustic characteristics of a four-point ball bearing. Part 1
- Authors: Kurushin M.I.1, Kurushin A.M.1, Zhilnikov Y.P.1, Murashkin V.V.2
-
Affiliations:
- Samara State Aerospace University named after academician S. P. Korolyov (National Research University)
- Samara Aerobearing Factory
- Issue: Vol 10, No 6 (2011)
- Pages: 114-122
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/7048
- DOI: https://doi.org/10.18287/2541-7533-2011-0-6(30)-114-122
- ID: 7048
Cite item
Full Text
Abstract
The paper presents the results of the calculation of noisiness of a four-point bearing depending on the accuracy of producing as a part of the product in which it works. The calculation was performed according to the methods developed by the authors. The results of calculating the noisiness of the outer ring show good agreement with the experimental data obtained in the course of tests at the vibroacoustic laboratory of the factory. The noisiness of the separator and the balls existing when the bearing is placed in any kind of an elastic system is calculated.
Keywords
About the authors
M. I. Kurushin
Samara State Aerospace University named after academician S. P. Korolyov (National Research University)
Author for correspondence.
Email: okm@ssau.ru
candidate of technical sciences, associate professor
Russian FederationA. M. Kurushin
Samara State Aerospace University named after academician S. P. Korolyov (National Research University)
Email: okm@ssau.ru
engineer, post-graduate student
Russian FederationYe. P. Zhilnikov
Samara State Aerospace University named after academician S. P. Korolyov (National Research University)
Email: okm@ssau.ru
candidate of technical sciences, professor
Russian FederationV. V. Murashkin
Samara Aerobearing Factory
Email: zap@samzap.ru
engineer, director of design bureau
Russian Federation