Email this article 
Purity control of hydro units and hydraulic technological equipment
- Authors: Logvinov L.M.1, Pominov E.I.1, Kudriavtsev I.A.1, Redko P.G.2, Ambarnikov A.B.2, Rukhlin A.S.2
-
Affiliations:
- Samara State Aerospace University
- Pavlovo Machine-Building Factory “VOSKHOD”, Joint Stock Company
- Issue: Vol 1, No 1 (2002)
- Pages: 99-104
- Section: TECHNICAL SCIENCES
- URL: https://journals.ssau.ru/vestnik/article/view/6765
- ID: 6765
Cite item
Full Text
Abstract
It is known, that in products, using energy of hydraulic liquid, transfer of energy and it’s management is carried out by means of the liquid under pressure in a closed contour. The working liquid is simultaneously grease and mean of energy transfer.
The article is devoted to the analysis of influence of wear debris on lubricative ability of hydraulic liquids and deterioration of friction units.
The authors made detailed description of application of developed control board KVANT-903 for analysis of samples taken at factory “VOSKHOD” and using built-in sensors.
It has been shown, that the using of built-in sensors sufficiently increases accuracy and efficiency of analysis.
Briefly described developed system of built-in control FOTON-965, installed at “VOSKHOD”.
About the authors
L. M. Logvinov
Samara State Aerospace University
Author for correspondence.
Email: vest@ssau.ru
Russian Federation
E. I. Pominov
Samara State Aerospace University
Email: vest@ssau.ru
Russian Federation
I. A. Kudriavtsev
Samara State Aerospace University
Email: vest@ssau.ru
Russian Federation
P. G. Redko
Pavlovo Machine-Building Factory “VOSKHOD”, Joint Stock Company
Email: vest@ssau.ru
Russian Federation
A. B. Ambarnikov
Pavlovo Machine-Building Factory “VOSKHOD”, Joint Stock Company
Email: vest@ssau.ru
Russian Federation
A. S. Rukhlin
Pavlovo Machine-Building Factory “VOSKHOD”, Joint Stock Company
Email: vest@ssau.ru
Russian Federation
References
Supplementary files
