Methodological approaches to the creation and functioning of serial robotic production of small satellites


Cite item

Full Text

Abstract

The article considers a system approach to the creation of robotic production of small nano satellites to ensure their serial production. The analysis of key trends in the creation and development of modern satellite production was carried out; the factors characterizing serial robotic production are identified and systematized. An intelligent production cell is described as the main element of serial robotic matrix-type production. The main types of design solutions aimed at adapting the design of a small satellite for robotic assembly are presented. The description of the project to create a prototype for  serial production of small satellites in the format of a cyberphysical factory, implemented at the advanced aerospace engineering school of Samara University, is given.

About the authors

I. S. Tkachenko

Samara National Research University

Author for correspondence.
Email: tkachenko.is@ssau.ru
ORCID iD: 0000-0001-8892-7975

Candidate of Science (Engineering), Associate Professor, Institute of Aerospace Engineering, Director

Russian Federation

References

  1. Potyupkin A.Yu. Upravlenie mnogosputnikovymi kosmicheskimi sistemami [Control of multi-satellite space systems]. Moscow: Infra-Inzheneriya Publ., 2024. 292 p.
  2. GOST Р 60.0.0.4-2019. Robots and robotic devices. Terms and definitions. Moscow: Standartinform Publ., 2019. 31 p. (In Russ.)
  3. Storozhenko V.V. Sozdanie sovremennoy strategii energoeffektivnogo upravleniya proizvodstvom. Materialy II Mezhdunarodnoy Nauchno-prakticheskoy Konferentsii «Aktual'nye Problemy Sotsial'no-ekonomicheskikh Nauk» (February, 29, 2016, Taganrog, Russian Federation). Moscow: Pero Publ., 2016. P. 42-48. (In Russ.)
  4. Izmaylov M.K. Problems of production process management for various types of production on domestic markets and foreign large industrial enterprises. Aktual'nye Problemy Ekonomiki i Upravleniya. 2020. No. 3 (27). P. 28-33. (In Russ.)
  5. Tkachenko I.S., Antipov D.V., Kupriyanov A.V., Smelov V.G., Kokareva V.V. Conceptual model of the digital plant of manufacturing enterprises in the aerospace industry. Izvestiya Samarskogo Nauchnogo Tsentra RAN. 2023. V. 25, no. 3 (113). P. 90-106. (In Russ.). doi: 10.37313/1990-5378-2023-25-3-90-106
  6. Tkachenko I.S., Kurkin E.I., Lukyanov O.E., Kishov E.A., Galinzoga-Samora J., Smelov V.G., Chertykovtseva V.O. Load-bearing structures design using topological optimization and additive manufacturing technologies. Ontology of Designing. 2022. V. 12, no. 4 (46). P. 532-546. (In Russ.). doi: 10.18287/2223-9537-2022-12-4-532-546
  7. Ustyugov E.V., Shafran S.V., Sobolev A.A. New CubeSat architecture without onboard cable network. Journal of Instrument Engineering. 2018. V. 61, no. 5. P. 423-429. (In Russ.). doi: 10.17586/0021-3454-2018-61-5-423-429

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2024 VESTNIK of Samara University. Aerospace and Mechanical Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies