Improving the accuracy of assessing the position deviation in coordinate measurements of GTE compressor and turbine blade profiles


Cite item

Full Text

Abstract

The paper proposes a method for increasing the accuracy of the iterative closest point (ICP) algorithm used in metrology problems in determining position deviation. The target of using the method for determining deviation profiles were compressor blades of a gas turbine engine (GTE). We propose to formulate the problem of the optimal match in the developed method as a multicriterion task including the criteria of the minimum of squared distances, differences of normal vectors and difference values of the depth of camber at the appropriate points of the superposed profiles. Different variants of reducing the problem to the use of a single integral criterion including the above-mentioned ones are considered. The problems of optimization were solved using the quasi-Newtonian methods of sequential quadratic programming. The proposed new method of improving the ICP algorithm based on geometric features showed greater accuracy in comparison with the discussed methods for optimizing the distance between the fitting points, especially in the case of a small number of measurement points on the profiles.

About the authors

M. A. Bolotov

Samara State Aerospace University

Author for correspondence.
Email: maikl.bol@gmail.com

Candidate of Science (Engineering)

Associate Professor, Department of Production of Aircraft Engines

Russian Federation

V. A. Pechenin

Samara State Aerospace University

Email: vadim.pechenin2011@yandex.ru

Postgraduate student of the Department of Production of Aircraft Engines

Russian Federation

N. V. Ruzanov

Samara State Aerospace University

Email: kinform_@mail.ru

Postgraduate student of the Department of Production of Aircraft Engines

Russian Federation

References

  1. Besl P.J., Mckay N.D. A method for registration of 3-D shapes // IEEE Transactions on Pattern Analysis and Machine Intelligence. 1992. V. 14, no. 2. P. 239-256. doi: 10.1109/34.121791
  2. Yadong L., Peihua G. Free-form surface inspection techniques state of the art review // Computer-Aided Design. 2004. No. 36. P. 1395-1417. doi: 10.1016/j.cad.2004.02.009
  3. Ainsworth I., Ristic M., Brujic D. CAD-Based measurement path planning for free-form shapes using contact probes // International Journal of Advanced Manufacturing Technology. 2000. V. 16. P. 23 – 31. doi: 10.1007/pl00013128
  4. Bentley J.L. Multidimensional binary search trees used for associative searching // Communications of the ACM. 1975. V. 18, no. 9. P. 509-517. doi: 10.1145/361002.361007
  5. Friedman J.H., Bentley J.L., Ari Finkel R. An algorithm for finding best matches in logarithmic expected time // ACM Transactions on Mathematical Software. 1977. V. 3, no. 3. P. 209-226. doi: 10.1145/355744.355745
  6. Balasubramanian S., Gu P. A neural network approach to localization of parts with complex surfaces for precision inspection // Proceedings ASME Computer Engineering Conference 1995. 1995. P. 1025-1031.
  7. Lee K. Bases of CAD (CAD/CAM/CAE). Saint Petersburg: Piter Publ., 2004. 560 p.
  8. Vygodskii M.Ya. Handbook of higher mathematics. Moscow: AST: Astrel Publ., 2006. 991 p.
  9. Gill P., Murray W., Wright M. Practical optimization. San Francisco: Academic Press, 1981.
  10. Powell M.J.D. A fast algorithm for nonlinearly constrained optimization calculations, numerical analysis// ed. G.A. Watson, Lecture Notes in Mathematics, Springer Verlag. 1978. doi: 10.1007/bfb0067703
  11. Korn G., Korn M. Mathematical handbook for scientists and engineers. New York: McGraw-Hill Book Compan, 1968.
  12. Zhang Z. Iterative point matching for registration of free-form curves and surfaces // International Journal of Computer Vision. 1994. V. 13, no. 2. P. 119-152. doi: 10.1007/bf01427149

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2015 VESTNIK of the Samara State Aerospace University

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies