Vol 24, No 4 (2021)

An analysis of the ellipsometric parameters of the reflected light from the prism – test material – air system is carried out when circularly polarized light is incident on it under the conditions of the onset of the phenomenon of total internal reflection. At the onset of total internal reflection, the ellipsometry parameter Δ shows high variability with the angle of incidence, in contrast to the parameter r0. It is shown that TIR occurs when the angle of incidence is not equal to the critical angle of the adjacent media – for two different materials, these angles differ from each other. In the case of a film, the TIR phenomenon occurs at an angle equal to the critical angle at the prism-air interface and does not depend on the film material. The results obtained show the high efficiency of using the ellipsometric method together with circularly polarized incident radiation for diagnostics of thin films made of biological material.

For sampling of time in a differential equation of movement of Thomson type oscillator (generator) it is offered to use a combination of the numerical method of finite differences and an asymptotic method of the slowl-changing amplitudes. The difference approximations of temporal derivatives are selected so that, first, to save conservatism and natural frequency of the linear circuit of self-oscillatory system in the discrete time. Secondly, coincidence of the difference shortened equation for the complex amplitude of self-oscillations in the discrete time with Euler’s approximation of the shortened equation for amplitude of self-oscillations in analog system prototype is required. It is shown that realization of such approach allows to create discrete mapping of the van der Pol oscillator and a number of mappings of Thomson type oscillators. The adequacy of discrete models to analog prototypes is confirmed with also numerical experiment.

In this work the possibility of increasing the amplitude of ultra-short pulses and formation of a monocycle Gaussian by adding signals from several oscillators was investigated. For this purpose, the ring adders of Wilkinson design were used. The design of which has been chosen due to low losses and high input decoupling. The S-parameters of the adders with different geometrical parameters have been simulated in the frequency band up to 5 GHz. The obtained results coincided with the experimentally measured characteristics. The monopulse amplitude was increased and a bipolar pulse shape was formed by adding ultrashort pulses of equal and different polarities using the adders. This approach allows you to adjust the parameters of the output signal by adjusting the delays of the triggering signals.

Using spectral energy equations of transmission-reception of wave processes in radio channel with scattering on object and direct radio channel, analysis of energy ratios of information signals and active masking interference at inputs of receivers of remote monitoring systems is carried out. Measures to reduce visibility are aimed at changing the reflective signatures of objects in the interests of reducing the de-masking features contained in secondary electromagnetic radiation to limits that exclude the performance of radar monitoring tasks at established distances and time intervals. Active interference is designed to mask information signals in receiving channels of radar at power that does not allow detecting their designers by passive radar. In case of joint application of not iceability reducing devices and active jammers, radar range reducing coefficient is determined by product of coefficient characterizing possibility of autonomous masking of information signals and coefficient achievable due to reduction of secondary electromagnetic radiation power in the second degree. The laws of increase of aircraft stealth from radar observation with joint application of technologies of reduction of radar visibility and masking by intentional interference created from sides of protected objects and from assigned points have been investigated. In order to maintain the desired signal-to-noise ratio at the output of the receiver with a decrease in the duration of the probing signal, it is necessary to proportionally increase the density of the emitted energy. With given antenna sizes, the maximum signal transmission range is proportional to the root square of their cyclic carrier frequency; increase of this parameter leads to increase of partial coefficient of directional action and effective area of antenna. With a decrease in the cyclic frequency of the carrier of the probing signal, in order to maintain the required directional properties of the antennas, it is necessary to increase their dimensions.