Email this article 
Discrete-phase movement transducers for the determination of turbine blade vibration parameters
- Authors: Danilin A.I.1, Grechishnikov V.M.1
-
Affiliations:
- Samara State Aerospace University
- Issue: Vol 10, No 1 (2011)
- Pages: 144-149
- Section: ELECTRONICS, MEASURING EQUIPMENT, RADIO ENGINEERING AND COMMUNICATION
- URL: https://journals.ssau.ru/vestnik/article/view/988
- DOI: https://doi.org/10.18287/2541-7533-2011-0-1(25)-144-149
- ID: 988
Cite item
Full Text
Abstract
A new class of measuring transducers is described. They are intended to control angular and linear blade tip movements of turbounits. These transducers use the discrete-phase method (blade tip timing) and their special feature is the determination of discrete blade vibration phases by the primary transducer in which the object of the control, the source and the receiver of the probe radiation of either optical or radiofrequency range are constructively and physically integrated.
About the authors
A. I. Danilin
Samara State Aerospace University
Author for correspondence.
Email: aidan@ssau.ru
Candidate of Technical Sciences
Associate Professor of the Radio Engineering and Medical Diagnostic Systems Department
Russian FederationV. M. Grechishnikov
Samara State Aerospace University
Email: gv@ssau.ru
Doctor of Technical Sciences
Professor
Head of the Electrical Engineering Department
Russian FederationReferences
- Danilin, A.I. Сriteria for discrete-phase control of working conditions of blades and their implementability in the turbo-units automated control systems [Text] / A.I. Danilin, A.G. Chernyavskiy // Vestnik of Samara State Aerospace University. – – №1(17). – PP. 107-115.
- Patent Russian Federation, International Class G 01 H 1/08. Signalling device of pre-failure deformations of turbomachine blades [Text] / Danilin A.I., Chernyavskiy A.G.; filed 29.03.00; published 20.12.01, bulletin № 35. – 4p.
- Patent Russian Federation, International Class G 01 Н 11/06. Method of measuring amplitude vibration of turbomachine blades and device for its realization [Text] / Danilin A.I., Chernyavskiy A.G., Adamov S.I.; filed 05.02.07; published 20.12.08, bulletin № 35. – 7p.
Supplementary files
