Email this article 
Influence of assembly conditions on the stressed-stained state of damper support elastic rings
- Authors: Diligensky D.S.1, Novikov D.K.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 16, No 1 (2017)
- Pages: 87-100
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/4595
- DOI: https://doi.org/10.18287/2541-7533-2017-16-1-87-100
- ID: 4595
Cite item
Full Text
Abstract
The article considers the influence of different tolerance values on the stiffness of elastic rings in squeeze film dampers. This type of damper is widely used in gas turbine engine supports. The available analytical solutions have a number of limitations. A parametric finite-element model of an elastic ring, a set of two interconnected elastic rings and a simplified segment is presented. The results obtained show the discrepancy between values of compliance for different numerical models as compared to analytical approaches. The effect of assembly tolerances on the value of compliance is shown.
Keywords
About the authors
D. S. Diligensky
Samara National Research University
Author for correspondence.
Email: diligen@mail.ru
Postgraduate Student of the Department of Aircraft Engine Design
Russian FederationD. K. Novikov
Samara National Research University
Email: novikovdk_ssau@mail.ru
Doctor of Science (Engineering)
Professor of the Department of Aircraft Engine Design
Russian FederationReferences
- Novikov D.K., Dilighensky D.S. Hydrodynamic damper design analysis. Sb. trudov mezhdunarodnogo nauchno-tekhnicheskogo foruma, posvyashchennogo 100-letiyu OAO «Kuznetsov» i 70-letiyu SGAU. T. 2. Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya s uchastiem molodykh uchenykh «Dinamika i vibroakustika mashin». Samara: Samara State Aerospace University Publ., 2012. P. 47-48. (In Russ.)
- OST 1 10778-72, 1 10779-72. Elastic rings of gas turbine engine rotor supports. De-sign and dimensions. Moscow, 1972. 11 p.
- Khronin D.V., Leont'ev M.K., Borzdyko E.V. Konstruktsiya i proektirovanie upru-godempfernykh opor rotorov VRD: uch. posobie [Design and construction of gas turbine en-gine rotor support elastic rings]. Moscow: Moscow Aviation Institute Publ., 1988. 37 p.
- Artemov E.A. Experimental and calculation defining of turbomachinery elastic sup-ports flexibility. Soviet Aeronautics. 1965. No. 2. P. 48-55.
- Leontiev M.K., Tereshko A.G. Investigation of characteristics of elastic rings mount-ed in rotor bearings of gas-turbine engines. Vestnik Moskovskogo aviatsionnogo instituta. 2011. V. 18, no. 3. P. 135-146.
Supplementary files
