Influence of the burner form on the combustion chamber outlet temperature field ripple for different modes of operation of gas turbine engines
- Authors: Markushin A.N.1, Baklanov A.V.1
-
Affiliations:
- Joint-Stock Company «Kazan Motor Production Association»
- Issue: Vol 15, No 3 (2016)
- Pages: 90-98
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/3113
- DOI: https://doi.org/10.18287/2541-7533-2016-15-3-90-98
- ID: 3113
Cite item
Full Text
Abstract
This article describes a method of identifying combustion chamber temperature field ripple by the preparation of the set of nozzles in the engine. It shows combustion chamber temperature field ripple with a divergent nozzle and a convergent one used in the burner. The design of the combustion chamber and that of the burners are described. Diagrams are plotted that show variation in circular and radial temperature field ripple depending on the engine behavior. The combustor exit temperature field non-uniformity is assessed using such parameters as the overall temperature distribution factor, the radial temperature distribution factor and the circumferential temperature distribution factor. Comparative analysis of the results of testing two combustion chambers with different modifications of burners is carried out. Conclusions about the effect of the burner design on the temperature field ripple are made.
Keywords
About the authors
A. N. Markushin
Joint-Stock Company «Kazan Motor Production Association»
Author for correspondence.
Email: AMarkushin@kmpo.ru
Chief Designer
Russian FederationA. V. Baklanov
Joint-Stock Company «Kazan Motor Production Association»
Email: andreybaklanov@bk.ru
leading design engineer
Russian FederationReferences
- Markushin A.N., Baklanov A.V., Tsyganov N.E. The influence of burner design on the characteristics of the combustion chamber with gaseous fuels. Vestnik of the Samara State Aerospace University. 2011. No. 3(27), part 1. P. 35-38. (In Russ)
- Kovylov Yu.L., Pashkov D.E., Didenko A.A., Abrashkin V.Yu. Method of averaging and assessment of the gas temperature field ripple at the output of a gas turbine engine combustion chamber. Sb. statey «Protsessy goreniya, teploobmena i ekologiya teplovykh dvigateley». Samara: Samara State Aerospace University Publ., 1998. P. 202-211. (In Russ.)
- Kovylov Yu.L., Lukachev S.V., Tsyganov A.M. Elements of the methodology of theory and design of gas turbine engine combustion chamber. Sb. statey «Protsessy goreniya, teploobmena i ekologiya teplovykh dvigateley». Samara: Samara State Aerospace University Publ., 1998. P. 165-189. (In Russ.)