The influence of residual technological stress and service heat loads on the strength of railway wheels
- Authors: Kerentcev D.E.1, Ponomarev J.K.2
-
Affiliations:
- Vyksa Steel Works, Nizhny Novgorod Region
- Samara State Aerospace University
- Issue: Vol 14, No 3-2 (2015): Special Issue
- Pages: 336-344
- Section: ISSUE WITHOUT SECTION
- URL: https://journals.ssau.ru/vestnik/article/view/2891
- DOI: https://doi.org/10.18287/2412-7329-2015-14-3-336-344
- ID: 2891
Cite item
Full Text
Abstract
The article deals with the existing approaches to assessing the strength of railway wheels and the problems associated with forecasting actual spots of fatigue crack origination in operation. Solid-rolled railway wheels with a flat cone disk of standard design that have become a frequent practice in the Russian railway system are taken as an example. Calculations of the safety factor of fatigue resistance according to domestic and foreign standards have been carried out. The authors propose a procedure for assessing the wheel fatigue resistance to solve the above problems, taking into account the impact of residual technological stresses caused by heat treatment in the manufacturing process, followed by the repair of the rim, and service heat loads associated with the heating of the rim during braking, when the wheel interacts with blocks. Quantitative assessment of the impact of residual technological stresses and service heat loads on the strength of the wheels is presented. In conclusion the results of testing the computational methods described are presented, wheels of low-stress design with improved performance characteristics developed by the JSC «Vyksa Steel Works» taken as an example.
About the authors
D. E. Kerentcev
Vyksa Steel Works, Nizhny Novgorod Region
Author for correspondence.
Email: kerentsev@bk.ru
Chief Designer of railway wheels, Engineering and Technology Center
Russian FederationJu. K. Ponomarev
Samara State Aerospace University
Email: ponomarev-ssau@yandex.ru
Doctor of Science (Engineering), Professor
Russian FederationReferences
- Volohov G.M., Kerentcev D.E. Development of strength evaluation methods for solid-rolled railway wheels construction and criteria of their release to service. Vestnik VELNII. 2013. No. 2 (66). P. 138-154. (In Russ.)
- GOST (State Standard) 10791-2011. Solid-rolled wheels. Specifications. Moscow: Standartinform Publ., 2011. 27 p. (In Russ.)
- OST 32.83-97. Traction equipment wheels with plate and spoke centers. Moscow: MPS Rossii Publ., 1997. 49 p. (In Russ.)
- EN 13979-1:2003+A2. Railway applications – Wheelsets and bogies – Monobloc wheels – Technical approval procedure – Part 1: Forged and rolled wheels: 2011. 50 p.
- AAR Standard S-669. Analytic Evaluation of Locomotive Wheel Designs: 2011. 17 p.
- AAR Standard S-660. Wheel Designs, Locomotive and Freight Car – Analytic Evaluation: 2009. 6 p.
- UIC B 169/RP 17. Standardization of Wheelsets. Definition of parameters for the thermomechanical calculation of wheels. Correlation between calculations and tests: 2006. 26 p.
- Keglin B.G., Kinitskaya A.P. Ekspluatatsionnaya nagruzhennost tormozov gruzovogo vagona // Vestnik VNIIZhT. Moscow: 1978. No. 4. P. 30-32. (In Russ.)
- Pat. 2428319 Rossiyskaya Federatsiya, MPK7 B 60 B 17/00, B 60 B 3/02, B 61 A 13/00, B 21 H 1/04. Zheleznodorozhnoe koleso / Golyishkov R.A., Kerentsev D.E.; zayavitel i patentoobladatel JSK «Vyiksunskiy metallurgicheskiy zavod». No. 2010113648; zayavl. 07.04.10; opubl. 10.09.11. Byul. No. 25. 18 p.
Supplementary files
![](/img/style/loading.gif)