Email this article 
Combined treatment technology for slot channels of cooling systems
- Authors: Rodionov A.O.1, Suhochev G.A.1, Kodentsev S.N.1, Smolyannikova E.G.1
-
Affiliations:
- Voronezh State Technical University, Voronezh
- Issue: Vol 13, No 5-2 (2014): Special Issue
- Pages: 143-149
- Section: ISSUE WITHOUT SECTION
- URL: https://journals.ssau.ru/vestnik/article/view/2522
- DOI: https://doi.org/10.18287/1998-6629-2014-0-5-2(47)-143-149
- ID: 2522
Cite item
Full Text
Abstract
The article presents the results of the searching and experimental research in the field of treatment of discontinuous surfaces in parts of cooling systems. The existing methods and means of technological equipment for providing of quality surface treatment of slot channels are described. Slot channels are especially technologically complex for treatment. A new method of combined treatment was proposed based on an analysis of existing treatment methods. The method allows to achieve the specified operational characteristics of .slot channels. Basic technological principles to design a new method of finishing of small-flow parts, which combines finishing and control operations, are developed. In article the mechanism of combined finishing for slotted channels are described. The results of experimental verification of the technological capabilities of the combined treatment are presented.
About the authors
A. O. Rodionov
Voronezh State Technical University, Voronezh
Author for correspondence.
Email: rodionov_alexander@mail.ru
Postgraduate student of Engineering Technology Department
Russian FederationG. A. Suhochev
Voronezh State Technical University, Voronezh
Email: suhotchev@mail.ru
Doctor of Science (Engineering)
Professor of Engineering Technology Department
Russian FederationS. N. Kodentsev
Voronezh State Technical University, Voronezh
Email: suhotchev@mail.ru
Candidate of Science (Engineering)
Associate Professor of Engineering Technology Department
Russian FederationE. G. Smolyannikova
Voronezh State Technical University, Voronezh
Email: sm.evgeniya@gmail.com
Candidate of Science (Engineering)
Associate Professor of Engineering Technology Department
Russian FederationReferences
- Suhochev G.A. Upravlenie kachestvom izdelij, rabotajushhih v jekstremal'nyh uslovijah pri nestacionarnyh vozdejstvijah [Quality management of products operating under extreme conditions in non-stationary effects]. Moscow: Mashinostroenie Publ., 2004. 287 p.
- Suhochev G.A., Kodentsev S.N., Rodionov A.O. Technological capabilities of combination processing are provided consumption characteristics of details with small channel // Uprochnjajushhie tehnologii i pokrytija. 2013. No. 7. P. 45-48. (In Russ.)
- Suhochev G.A., Smolyannikova E.G., Kapustin A.V. Task-Oriented Use Of Unconventional Technologies In Order To Increase The Technological Effectiveness Of Hydraulics And Paddle Machines // Pumps. Turbine. Systems. 2013. No. 3(8). P. 12-18. (In Russ.)
- Kodentsev S.N., Suhochev G.A., Smolyannikova E.G. Technology of combined electrical discharge machining of cavities and channels of complex profile // Naukoemkie tehnologii v mashinostroenii. 2012. No. 5. P. 31-36. (In Russ.)
- Nebolsin D.M., Suhochev G.A., Kodentsev S.N. Research of modes of the combined processing of internal surfaces // Vestnik Voronezhskogo gosudarstvennogo tehnicheskogo universiteta. 2011. V. 7, no.4. P. 44-47. (In Russ.)
Supplementary files
