MECHANICAL ENGINEERING AND POWER ENGINEERING

Issue Title File
Vol 13, No 4 (2014) Post-operation state and extension of service life of compressor blades of the gas-turbine power plant GTE-45-3 PDF
(Rus)
Tarasenko Y.P., Berdnik O.B., Tsareva I.N.
Vol 13, No 4 (2014) Structural and acoustic anisotropy of turbocompressor blade material PDF
(Rus)
Tarasenko Y.P., Krivina L.A., Motova E.A., Nikitina N.Y.
Vol 13, No 4 (2014) Heat-shielding zirconium dioxide coating on an intermetallic substrate obtained by the method of high-energy plasma spraying for gas-turbine engine turbine blades PDF
(Rus)
Tarasenko Y.P., Tsareva I.N., Berdnik O.B., Fel Y.A., Fedorchenko D.G.
Vol 13, No 4 (2014) Mathematic simulation of AL-31F powerplant radiation in the IR range PDF
(Rus)
Filippov G.S.
Vol 13, No 4 (2014) Elimination of gas dynamic resonance modes of vibration loads of gas distribution station pipeline fitting PDF
(Rus)
Shabanov K.U., Kryuchkov A.N., Ermilov M.A., Balyaba M.V.
Vol 13, No 1 (2014) Study of thermal stability of microdisperse filler reinforced composites PDF
(Rus)
Shustov I.I., Koytov S.A., Melnikov V.N.
Vol 13, No 1 (2014) Method of calculating vibrations in a pipeline with damping supports made of MR material PDF
(Rus)
Bezborodov S.A., Ulanov A.M.
Vol 13, No 1 (2014) Development of a small-sized acoustic probe for the measurement of pressure pulsations in the gasdynamic duct of gas turbine engines PDF
(Rus)
Gimadiyev A.G., Bystrov N.D., Ilyinsky S.A.
Vol 13, No 1 (2014) The use of regression models for estimating the standards of electric power losses in its transfer by territorial network companies PDF
(Rus)
Goldshtein V., Kubarkov Y., Rygalov A., Revyakina E., Stepanov V.
Vol 13, No 1 (2014) Numerical investigation of gas dynamics in nozzles of small-dimensioned gas generators and flowing out jets PDF
(Rus)
Ivanov I., Kryukov I., Shustov S.
Vol 13, No 1 (2014) Modeling static and dynamic characteristics of pressure reducing valves PDF
(Rus)
Igolkin A.A.
Vol 13, No 1 (2014) Calculation of hydrodynamic noise in the diffuser of a pulsation damper flow channel PDF
(Rus)
Makaryants G.M., Gafurov S.A., Zubrilin I.A., Kryuchkov A.N., Shakhmatov Y.V., Berestovitsky E.G., Gladilin Y.A.
Vol 13, No 1 (2014) Computer simulation of forming thin-walled t-tees PDF
(Rus)
Popov I.P., Severinenko A.Y., Petrof Y.O.
Vol 13, No 1 (2014) Forecasting the endurance limit of surface-hardened cylindrical parts made of steel 20 by the initial deformations of reference specimen PDF
(Rus)
Sazanov V.P.
Vol 13, No 1 (2014) Life time of vibration isolators made of MR material subjected to random loads PDF
(Rus)
Ulanov A.M., Bezborodov S.A.
Vol 13, No 1 (2014) Research of the mechanism of shock-inertial deposition of dispersed particles from a gas flow PDF
(Rus)
Usmanova R.R., Zhernakov V.S.
Vol 13, No 1 (2014) Simulation and research of factors affecting aerodynamic indices of the gas purification process PDF
(Rus)
Usmanova R.R., Zhernakov V.S.
Vol 12, No 2 (2013) Research of growth rate of fatigue cracks in aluminum AK6 alloy depending on tension characteristics in the field of their progress PDF
(Rus)
Aistov I.P., Vansovich K.A., Kruchkov A.N.
Vol 12, No 2 (2013) Stability of swirl flows with radial density gradient PDF
(Rus)
Anchikov D.A., Gusev V.A., Zavershinskii I.P., Makaryan V.G., Sugak S.S.
Vol 12, No 2 (2013) The influence of design and performance parameters of an angular ball bearing on the stiffness of gas turbine engine rotor supports PDF
(Rus)
Balyakin V.B., Zhilnikov E.P., Barmanov I.S.
Vol 12, No 2 (2013) Agreement between criterial equations of heat transfer in the process of cooling aluminium ingots and experimental data PDF
(Rus)
Gorshenin A.S., Krivosheev V.E.
Vol 12, No 2 (2013) Tests of tubing made of aluminum alloy 1953T1 with wear-resistant thread-lined coats PDF
(Rus)
Ivanova A.V.
Vol 12, No 2 (2013) Optimal design of an induction heater of minimum length PDF
(Rus)
Mednikova V.A.
Vol 12, No 2 (2013) Method of pipeline system designing taking into account complex interaction of static and dynamic processes with strength characteristics PDF
(Rus)
Mironova T.B., Prokofiev A.B., Rodionov L.V.
Vol 12, No 2 (2013) Chemical gas sources PDF
(Rus)
Novikov A.A., Ershikhin N.A.
Vol 12, No 2 (2013) Thermophysical properties of multilayered structures PDF
(Rus)
Rapilbekova N.S.
Vol 12, No 2 (2013) Analysis of schemes and methods of hydrodynamic cleaning of hydro-fuel system units PDF
(Rus)
Sanchugov V.I., Reshetov V.M.
Vol 12, No 2 (2013) Flame propagation velocity and ionization in burning gasoline and methane with addition of hydrogen PDF
(Rus)
Shaykin A.P., Ivashin P.V., Galiev I.R.
Vol 12, No 1 (2013) Active noise control systems based on acoustic particle velocity measurements PDF
(Rus)
Gasparov M.S., Kharitonov M.Y.
Vol 12, No 1 (2013) Development of a structural and algorithmic model of pur-poseful actions of experts in maintenance and repair PDF
(Rus)
Koptev A.N., Popovich A.A.
Vol 12, No 1 (2013) Mathematical model of training and self-training in maintenance of complicated systems PDF
(Rus)
Koptev A.N., Popovich A.A.
Vol 12, No 1 (2013) Analysis of the influence of high-frequency current and annealing modes on the complex of mechanical properties of titanium alloy GTE compressor blades produced by high-speed stamping PDF
(Rus)
Kostyshev V.A., Pityugov M.S.
Vol 12, No 1 (2013) The influence of high-frequency current heating temperature on the structure and properties of VT9 alloy blanks for high-speed stamping PDF
(Rus)
Kostyshev V.A., Pityugov M.S.
Vol 12, No 1 (2013) Verification of a complex of mathematical models of aerodynamics and dynamics of Savonius rotor motion PDF
(Rus)
Sizov D.A., Onushkin Y.P., Krasnova O.A., Dzhanibekov O.T.
Vol 12, No 1 (2013) Mathematical modeling of dynamic processes in a hydraulic drive with a discrete regulator of liquid flow PDF
(Rus)
Shakhmatov Y.V., Gimadiev A.G., Sverbilov V.Y., Sinyakov A.F.
Vol 12, No 1 (2013) Test rig for a hydraulic drive under switched inertance control PDF
(Rus)
Shorin V.P., Sverbilov V.Y., Gimadiev A.G., Greshniakov P.I., Ilyukhin V.N., Stadnik D.M.
Vol 12, No 1 (2013) Cyclic com pression of a multilayer multispan laminated package of corrugated sheets PDF
(Rus)
Eskin I.D., Alkeev R.I., Ivashchenko V.I.
Vol 12, No 1 (2013) Experimental and design analysis of models of cyclic compression for a multilayer multispan package of corrugated sheets PDF
(Rus)
Eskin I.D., Alkeev R.I., Ivashchenko V.I.
Vol 12, No 1 (2013) Analysis of the results of fatigue tests of cylindrical specimens with fillets using the method of finite element modeling PDF
(Rus)
Vakulyuk V.S.
Vol 11, No 4 (2012) Life testing of pipeline elements PDF
(Rus)
Boltenkova O.M., Davydov O.Y., Yegorov V.G.
Vol 11, No 4 (2012) Automated construction of a 3D plane model at the stage of technical proposals PDF
(Rus)
Borgest N.M., Aleev R.H., Aksanian P.A., Gromov A.A.
Vol 11, No 4 (2012) Procedure of calculating efforts of blank stretching without corrugation in stretch forming PDF
(Rus)
Dementyev S.G.
Vol 11, No 4 (2012) Using a digital camera in a speckle – interferometer optical scheme for the analysis of static deformations in gas turbine engine elements PDF
(Rus)
Zhuzhukin A.I., Solyannikov V.A.
Vol 11, No 4 (2012) Analysis of the stressed state of high-speed extrusion process PDF
(Rus)
Kostyshev V.A., Pityugov M.S.
Vol 11, No 4 (2012) Modeling oil separation in the impeller of a radial-type centrifugal breather PDF
(Rus)
Petrukhin A.G., Tryanov A.E.
Vol 11, No 4 (2012) Mathematical model of investigating normal acoustic modes of launch vehicle modules PDF
(Rus)
Popov P.A., Belov A.S., Kryuchkov A.N.
Vol 11, No 4 (2012) Stabilization of a pilot-operated gas pressure control valve by placing a throttle at the inlet PDF
(Rus)
Stadnik D.M., Sverbilov V.Y., Makaryants G.M., Makaryants M.V.
Vol 11, No 4 (2012) Assessing the impact of non-through cracks (scratches) on the structural strength when designing aircraft PDF
(Rus)
Yakovlev A.S.
Vol 11, No 2 (2012) Manipulation technological complex for manned submersibles PDF
(Rus)
Alekseev A.V., Olenin A.L., Smirnov G.V., Fendrikov A.N.
Vol 11, No 2 (2012) The influence of grain orientation and structure parameters on the limiting formability of skin sheets during stretch-wrap forming PDF
(Rus)
Aryshensky V.Y., Grechnikova A.F., Yerisov Y.A.
Vol 11, No 2 (2012) Pressure pulsation dampers as a means of improving the inherent vibroacoustic charateristics of hydraulic test rigs PDF
(Rus)
Berestovitsky E.G., Gladilin Y.A., Kryuchkov A.N., Fyodorov A.Y., Frantov A.A., Shakhmatov Y.V.
Vol 11, No 2 (2012) The influence of a combined pump’s auger-centrifugal stage inlet design on its vibration and pulsation states PDF
(Rus)
Gafurov S.A., Rodionov L.V., Kryuchkov A.N., Makaryants G.M., Shakhmatov Y.V.
Vol 11, No 2 (2012) Analysis of the causes of auger-centrifugal pump bearing destruction PDF
(Rus)
Gafurov S.A., Rodionov L.V., Kryuchkov A.N., Makaryants G.M., Shakhmatov Y.V.
Vol 11, No 2 (2012) Experimental study of a power absorber of accelerated fluid flow in pipelines PDF
(Rus)
Gimadiev M.A., Gimadiev A.G.
Vol 11, No 2 (2012) Mathematical modeling of heat exchange on air cooling of a number of aluminum ingots PDF
(Rus)
Gorshenin A.S.
Vol 11, No 2 (2012) Application of a casting technique in the form of piston pressing for grinding the structure of an aluminum alloy PDF
(Rus)
Grechnikov F.V., Popov I.P., Bibikov A.M., Demyanenko E.G., Nikolenko K.A.
Vol 11, No 2 (2012) Numerical simulation of separation processes in mechanical working PDF
(Rus)
Ivanov K.M., Vinnik P.M., Ivanov V.N.
Vol 11, No 2 (2012) Simulator, algorithm and software for the computation of differential gas circuits frequency response PDF
(Rus)
Igonin A.A., Gimadiev A.G.
Vol 11, No 2 (2012) Model of sedimentation of solid particles of heterogeneous materials PDF
(Rus)
Polyanskov Y.V., Evseev A.N., Poroykov V.A.
Vol 11, No 2 (2012) Determining the angle of advance of ignition when switching from petrol to gas depending on fuel mixture burning rate PDF
(Rus)
Shishkov V.A.
Vol 11, No 1 (2012) The influence of the heat processing and plastic deformation modes on the formation of the aluminum alloys structure PDF
(Rus)
Savelyeva O.G.
Vol 11, No 1 (2012) Model of the main worm of milling cutters for gear cutting PDF
(Rus)
Androsov S.P., Brailov I.G., Vizigin D.V.
Vol 11, No 1 (2012) Theoretical assessment of the influence of temperature on lattice spacing of aircraft gas-turbine engine turbine monocrystals PDF
(Rus)
Badamshin I.K.
Vol 11, No 1 (2012) Cramped bending of sheet metal piece curved sides with an elastic medium PDF
(Rus)
Barvinok V.A., Komarov A.D., Kulakov V.G., Moisseyev V.K., Sharov A.A.
Vol 11, No 1 (2012) Design and research of characteristics of a pressure fluctuation damping device for electrocontact manometers PDF
(Rus)
Gimadiev A.G., Gimadiev A.A., Ermochkin A.Z., Ilyuchin V.N.
Vol 11, No 1 (2012) Development of yield criteria for the calculation of forming high-textured anisotropic blanks PDF
(Rus)
Grechnikov F.V., Yerisov Y.A.
Vol 11, No 1 (2012) Stability of a rigid nonsymmetric rotor in elastic-damper sliding bearings PDF
(Rus)
Ermilov Y.I.
Vol 11, No 1 (2012) Research of the process of sheet presswork using polyurethane under constrained bending PDF
(Rus)
Eskina E.V., Gromova E.G.
Vol 11, No 1 (2012) Analysis of contact stresses in drawing round products PDF
(Rus)
Kargin V.R., Kargin B.V., Kolesnikova S.Y., Sergeev Y.A.
Vol 11, No 1 (2012) Calculation of skidding in intershaft roller bearings of gas turbine engines PDF
(Rus)
Makarchuk V.V., Zhilnikov E.P.
Vol 11, No 1 (2012) Finite element techniques for pipe system vibroacoustical characteristics modelling PDF
(Rus)
Mironova T.B., Prokofiev A.B., Shorin V.P.
Vol 11, No 1 (2012) A hot-wire anemometric transducer of airflow mass rate PDF
(Rus)
Nikolayev V.N.
Vol 11, No 1 (2012) Peculiarities of strain behaviour and stressed state of plates made of unbalanced laminated composite materials PDF
(Rus)
Pervushin Y.S., Soloviev P.V.
Vol 11, No 1 (2012) Method of producing thin-walled conical parts in a die with an elastic element PDF
(Rus)
Popov I.P., Nesterenko E.S., Zimarev M.V.
Vol 11, No 1 (2012) System design of follow shearing dies for cutting sheet blank PDF
(Rus)
Pochekuev E.N., Skripachev A.V., Shenberger P.N.
Vol 11, No 1 (2012) Influence of the direction of ultrasonic vibrations on the formation of residual stresses in thread pieces made of titanium alloys PDF
(Rus)
Romashkina O.V., Karanaeva O.V.
Vol 10, No 6 (2011) Mathematical simulation of combined technologies PDF
(Rus)
Belyaeva I.A.
Vol 10, No 6 (2011) Using the theory of dynamic analogies for modelling automated manufacturing systems PDF
(Rus)
Gareyev A.M., Koptev A.N., Gareyev T.M.
Vol 10, No 6 (2011) Experimental research of combined technology for parts assembly PDF
(Rus)
Glushchenkov V.A., Khardin M.V., Belyaeva I.A.
Vol 10, No 6 (2011) Mathematical model of anisotropic elastic-plastic material PDF
(Rus)
Grechnikov F.V., Yerisov Y.A.
Vol 10, No 6 (2011) Planning a factorial experiment for testing a single-stage ultralow power turbine PDF
(Rus)
Grigoryev V.A., Radko V.M., Kalabukhov D.S.
Vol 10, No 6 (2011) Choise of the range and levels of varying the factors of the experiment plan for testing single-stage ultralow power turbine PDF
(Rus)
Grigoryev V.A., Radko V.M., Kalabukhov D.S.
Vol 10, No 6 (2011) Method of constructing diagnostic models of aircraft hydraulic systems in an analytic form PDF
(Rus)
Kovalev M.A., Borodkin G.V., Khablo I.I.
Vol 10, No 6 (2011) Calculation of vibroacoustic characteristics of a four-point ball bearing. Part 1 PDF
(Rus)
Kurushin M.I., Kurushin A.M., Zhilnikov Y.P., Murashkin V.V.
Vol 10, No 6 (2011) Transducer of fluid and air consumption and temperature in pipelines PDF
(Rus)
Nikolayev V.N., Kabanov Y.N.
Vol 10, No 6 (2011) Theoretical and experimental investigation of the photographic reconnaissance plane instrument bay thermal state PDF
(Rus)
Nikolayev V.N.
Vol 10, No 6 (2011) Numerical simulation of the thermal-stress state of an highpressure compressor rotor with consideration for secondary flows PDF
(Rus)
Temis Y.M., Selivanov A.V., Yurchenko G.G.
Vol 10, No 6 (2011) Research of dynamic parameters of hot forging on hammers with freely falling parts PDF
(Rus)
Shitarev I.L., Khaimovich A.I.
Vol 10, No 6 (2011) Operation of an electronic system of control for spark-ignition gas fuel internal combustion engines in ignition misses PDF
(Rus)
Shishkov V.A.
Vol 10, No 6 (2011) Peculiarities of starting a spark-ignition gas fuel internal combustion engine PDF
(Rus)
Shishkov V.A.
Vol 10, No 6 (2011) Nondestructive quality control of mechanical-rubber goods vulcanization PDF
(Rus)
Astapov V., Misiyevitch S.K.
Vol 10, No 2 (2011) Construction of a blade beam finite element as a component of the blade disk rotary-symmetrical system PDF
(Rus)
Davydov D.P.
Vol 10, No 2 (2011) Design of bimetallic impeller for gas turbine PDF
(Rus)
Magerramova L.A.
Vol 10, No 2 (2011) Transformation of longitudinal deformation wave at the boundary of conjugation of bars with an elastic element PDF
(Rus)
Manzhosov V.K., Novikova I.A.
Vol 10, No 2 (2011) Estimation of the adequacy of electronic flow model and efficiency characteristic of small centripetal turbine drive PDF
(Rus)
Matveev V.N., Shabliy L.S.
Vol 10, No 2 (2011) Analysis of the applicability of laser stereolithography technology for the production of turbodrives PDF
(Rus)
Shabliy L.S.
Vol 10, No 2 (2011) Some results of experimental refining of a constant volume valve combustion chamber PDF
(Rus)
Bogdanov V.I., Kuznetsov S.P.
Vol 10, No 2 (2011) Research of errors of measuring angular location parameters of holes in turbine and compressor discs of gas turbine engines PDF
(Rus)
Bolotov M.A., Zhidyaev A.N., Shitarev I.L., Cheveleva A.O.
Vol 10, No 2 (2011) Models and methods of optimizing the procedure of measuring gas turbine engine parts using coordinate measuring devices PDF
(Rus)
Bolotov M.A., Lyozin I.A.
Vol 10, No 2 (2011) Construction of a promising face gas-dynamic seal of the aircraft engine PDF
(Rus)
Bondarchuk P.V., Falaleev S.V.
101 - 200 of 266 Items << < 1 2 3 > >> 

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies