Vol 13, No 2 (2014)

Full Issue

Automated selection of cooling system for radio electronic design of thermophysical

Goryachev N.V., Trusov V.A., Yurkov N.K.

Abstract

Explain the principle of automated selection of uniform design of the cooling system, implemented in the pr ocess of designing termal electronic means, which uses the results of natural and computational experiments.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):7-10
pages 7-10 views

Simulation of responses p-n junction to dynamic influences

Bodnarchuk G.A.

Abstract

The processes proceeding in p-n junction under the influence of step offsetting voltage and impulse lighting are simulated.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):11-15
pages 11-15 views

SAR which parasitize the TV signals

Borisenkov A.V., Goryachkin O.V., Dolgopolov V.N., Zhengurov B.G.

Abstract

The paper describes the system of obtaining radar images, using as a probe signal of TV broadcasting scheme of bistatic SAR. Describes the major functional and design characteristics of the equipment examined formation algorithm radar. Also the results obtained in the course of a natural experiment.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):16-24
pages 16-24 views

Primary converters for the implementation of Doppler method for measuring blade oscillation power unit

Danilin A.I., Gretskov A.A.

Abstract

The paper deals with the design features of building waveguide primary device for implementing the method of dete rmining the parameters of the Doppler blade oscillation power units.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):25-29
pages 25-29 views

Circuit design receipt autodynes signal to converter displacement parameters elements rotating parts of turbune unit

Danilin A.I., Gretskov A.A.

Abstract

Suggests  ways to bridge the  inclusion of the active transducer element autodyne in order to obtain the info rmation signal to determine the parameters of movement of elements of turbine rotating parts.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):30-34
pages 30-34 views

Assessment of the error of measurement of the period which has been set by pulse signals, and method of increase of accuracy measurement

Olejnikov V.A.

Abstract

We consider a method of increasing the accuracy of measurement intervals defined dome shaped signals varying in amplitude. It is proposed a device for performing the method, and a сomparative evaluation of the existing errors and recommended methods. The evaluation showed improved accuracy of the proposed method for measuring 3 ... 4 order in this range of variation of the amplitudes of the input signals.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):35-40
pages 35-40 views

Device for removing phasefrequency characteristics amplifiers

Tyulevin S.V., Piganov M.N., Chopin G.P., Elizarov S.V.

Abstract

The article discusses a device for removing the phase response of amplifiers. Describes the principles of its operation are given diagrams voltage outputs blocks that make up the device. The processes of change in the phase shift of the output voltage of the amplifier, signal conversion, and coordinates. Formation of orthogonal initial tension and their conversion from rectangular coordinate system in the polar is probed.The advantage of the device is represented by a high precision removal phase response of the amplifier.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):41-46
pages 41-46 views

Calculation of power dissipation in corps of onboard equipment of space vehicle in direct electrostatic discharge

Kostin A.V.

Abstract

Describes an example of the calculation of power dissipation in corps of onboard equipment of space vehicle in direct electrostatic discharge. The analysis of the obtained results in order to identify hazards thermal influence of electrostatic discharges on the temperature regime of onboard equipment of space vehicle.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):47-55
pages 47-55 views

Control device nonlinear distortion radioelement

Shopin G.P., Tyulevin S.V., Piganov M.N., Nasedkin A.V.

Abstract

Considered control device radioelements nonlinear distortion in the transmission path and the amplification of electrical signals. On the causes of non-linear distortion. Given the composition of the control device and communication between its units. Shows the process of converting radio signals. The device provides higher selectivity and precision of control.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):56-60
pages 56-60 views

Device for fitting thick-film resistors

Piganov M.N., Shopin G.P., Stolbikov A.V., Erendeev Y.P.

Abstract

This work presents device for fitting thick-film resistors to nominal value by single-electrode discharge method. Structural circuit of device is included. Work demonstrates principles of this device’s work. Device provides increasing of precision and expanding of fitting ability.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):61-67
pages 61-67 views

Device for rejection of semiconductor diodes

Tyulevin S.V., Piganov M.N., Chopin G.P., Arhipov A.I.

Abstract

The article describes the control device, allowing to make rejection of semiconductor diodes. The proposed device has a high accuracy and reliability of the control. The device allows you to set different rates of change of the out-put voltage of the sawtooth generator. Quality control is performed by diode reverse branch of the current-voltage characteristics. The device provides a better signal / noise ratio at low current levels.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):68-73
pages 68-73 views

HF radio communication systems: development, production and perspective solutions

Luchin D.V., Spodobayev M.Y.

Abstract

The article contains the review of development of the Radio Research & Development Institute Samara Branch in the area of creation of various equipment for the communication channels working in HF range. Thus presents system researches on a number of the main directions of a radio communication, development of antennas and antenna systems, including original designs in the form of ring lattices are allocated, examples of successful solutions of creation of the equipment with the improved noise stability and capacity. All development is accompanied by the corresponding information support and creation of special software products.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):74-79
pages 74-79 views

Structure of arterial blood pressure monitors

Fedotov A.A., Akulov S.A., Akulova A.S.

Abstract

This article is devoted to constructing instrumental tools of noninvasive measurement of arterial blood pressure. The structure of blood pressure monitors based on simultaneous using of oscillometric and auscultatory measurement methods is considered.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):80-84
pages 80-84 views

Airborne LIDAR in ensuring gliding UAV flight mode

Leonovich G.I., Matyunin S.A., Paranin V.D., Shornikov A.M., Savelyev M.V.

Abstract

The application of airborne aerosol lidar to search and identify the vertical direction of air flow - thermals. Describes the working principle, the basic components and parameters of the LIDAR transceiver node. The algorithm application in LIDAR glider mode in summer UAV.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):85-92
pages 85-92 views

Analysis of random uncertainties of heart rate variability

Fedotov A.A., Akulova A.S., Akulov S.A.

Abstract

The article is devoted to analysis of random uncertainties of heart rate variability indices. The article contains the algorithm of Hurst indicator calculation based on RS-method and algorithm of calculation of fluctuation coefficient based on Detrended Fluctuation Analysis. The dependence between relative uncertainty of heart rate variability indices and absolute uncertainty of measurement of beat-to-beat intervals is estimated. The conclusion about sensitivity of heart rate variability indices used in the article to the uncertainty of measurement of beat-to-beat intervals is made.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):93-97
pages 93-97 views

Features computer simulation cluster charactiristics electromagnetic converters

Merkulov A.I., Lavrov A.Y., Burkov D.S.

Abstract

The paper discusses the features of the cluster modeling of eddy current probes, taking into account their mutual influence. The necessity of taking into account both the total intensity of the magnetic fields of the current cluster members eddy current probes, and the resulting cross-section of the magnetic fluxes of each transducer, which is structurally unrestricted.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):98-104
pages 98-104 views

Fundamentals of optical measurements of informative components of complex movements

Nesterov V.N., Nesterov D.V.

Abstract

Theoretical fundamentals of optical measurements informative components of complex movements on the ba-sis of multivariate test objects are explicated.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):105-111
pages 105-111 views

Spectrum of semiconductor laser with an external birefringent resonator

Udeneev A.M., Paranin V.D.

Abstract

The semiconductor laser radiation with the external birefringent resonator is investigated. Existence of two main generated spectral lines corresponding to resonances of ordinary and extraordinary waves is established. Effective control of radiation, without loss on a spectral filtration is shown. It is specified possibility of application of two-mode generation in optical communication systems with WDM.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):112-117
pages 112-117 views

Method of production testing of electronic parts

Nasedkin A.V., Shumskikh I.Y.

Abstract

The expediency of replacing coatings based on lacquer UR-231 on the film of poly-p-xylylene in electronic units of space instruments. To confirm the possibility of using this coating technique proposed accelerated test and test instrument design unit and an electronic assembly. Made impacts and selection of test equipment. The technique of application of poly-p-xylylene on the working surface of the electronic unit.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):118-124
pages 118-124 views

One method to build flying vehicle launch catapults

Taranukha V.P., Petrushin S.A., Pechenkin A.Y., Glushkov V.A.

Abstract

The paper considers rotational catapults to launch flying vehicles (FV). Their mathematical descriptions with calculation formulas are given. Rotational catapults are compared with conventional steam and hydraulic devices on the accumulated potential and kinetic energy, power, efficiency, work and the capacity of electrical accumulators. Rotational catapults advantages and disadvantages are analyzed. Ways to fix the existing disadvantages are described. Formulas for calculation of power capabilities of the catapult energy sources are given. Rotational catapults basic performance characteristics are shown, their structural units are depicted. Catapults application in the state-of-the-art systems and devices for unmanned and piloted FV launching are analyzed.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):125-128
pages 125-128 views

Discrete phase converters moving elements rotating units power units

Danilin A.I., Grechishnikov V.M.

Abstract

Presents a new class of converters of angular and linear elements rotating units power units, allowing with the minimum of preparation to ensure accuracy and reliability of the control of movements in real operational conditions.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):129-137
pages 129-137 views

Methodology of analysis temperature stresses in chips

Krasnoschekova G.F., Tyulevin S.V., Nasedkin A.V., Mishanov R.O.

Abstract

The article describes the method of analysis of thermal stresses in semiconductor chips and foil. The analysis of the main types of thermal stress: bending, shear, internal. The expressions for the evaluation of thermal stresses.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):138-141
pages 138-141 views

Trouble error parameters determination microrelief optoelectronic means on the basis of correlation algorithm

Abramov A.D., Bukanov F.F.

Abstract

In this article the method of compensation of auxillary measurement error by means of optical and electronic complex of the parameters of surface microrelief which appears as a result of the deflection of the light flux level from its nominal meaning is viewed. The method is based on the determination of autocorrelative functions by the image of analyzed surface.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;13(2):142-147
pages 142-147 views

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies