Email this article 
Computer simulation of forming thin-walled t-tees
- Authors: Popov I.P.1, Severinenko A.Y.1, Petrof Y.O.1
-
Affiliations:
- Samara State Aerospace University
- Issue: Vol 13, No 1 (2014)
- Pages: 144-149
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/1706
- DOI: https://doi.org/10.18287/1998-6629-2014-0-1(43)-144-149
- ID: 1706
Cite item
Full Text
Abstract
The paper presents a new method of forming thin-walled t-tees. A finite- element software product ANSYS/LS-DYNA is applied to analyze the quality of the t-tees produced and to compare them with those obtained by flanging. The variation in thickness of t-tees is analyzed and the efficiency of the forming method proposed is confirmed.
About the authors
I. P. Popov
Samara State Aerospace University
Author for correspondence.
Email: ig_popov@mail.ru
Doctor of Science (Engineering), Professor
Professor of the Department of Plastic Metal Working
Russian FederationA. Yu. Severinenko
Samara State Aerospace University
Email: antonsever@yandex.ru
Postgraduate student
Department of Plastic Metal Working
Russian FederationYu. O. Petrof
Samara State Aerospace University
Email: Dyran3604@yandex.ru
Postgraduate student
Department of Plastic Metal Working
Russian FederationReferences
- Davidov O.Y., Egorov V.G., Nevstruev Y.A. Forming of unequal tees from tubular billet in split dies // Zagotovitel'nye proizvodstva v mashinostroenii. 2005. №6. P. 40-44. (In Russ.)
- Forming of standard elements of pipeline systems using multipurpose hydraulic presses. Technologic recommendations / Kharkov branch office of NIAT. Kharkov: 1985
- Titov R.S., Gilimzyanov Sh.N., Antropov V.V., Maslov V.D., Popov I.P. Ustroystvo dlya formoobrazovaniya troynikov [Devices for tees forming]. Patent of the Russian Federation, no. 67487, 2007. (Published 27.10.2007, bulletin no. 30)
- Severenko A.Yu., Petrov Yu.O., Maslov V.D., Grechnikov F.V. Ustroystvo dlya formoobrazovaniya polykh troynikov [Devices for hollow tees forming]. Patent of the Russian Federation, no. 119655, 2012. (Published 27.08.2012, bulletin no. 24)
Supplementary files
