Process of forming mirror-shaped relief plates of folded structure


Cite item

Full Text

Abstract

We present a process flow sheet that allows dividing the process of shaping of folded structures into several stages. The formation of the relief is achieved by inverting individual sections of the trapezoidal corrugation to give them a mirror-reflected shape. The process is characterized by narrow zones of bending deformations along the lines of the structure marking and by warping of faces without drawing. The field shaper layout and the relationships for calculating geometric and process parameters are presented.

About the authors

V. I. Khaliulin

Kazan National Research Technical University named after A.N. Tupolev

Author for correspondence.
Email: pla.kai@mail.ru

Doctor of Science (Engineering), Professor,
Head of the Department of Aircraft Production

Russian Federation

R. Sh. Gimadiev

Kazan State Power Engineering University

Email: gimadievr@mail.ru

Doctor of Science (Engineering),
Professor of the Department of Engineering Cybernetics

Russian Federation

V. A. Markovtsev

Ulyanovsk Research Institute of Aviation Technology and Production Management

Email: info@ulniat.ru

Doctor of Science (Engineering)
General Director

Russian Federation

N. V. Levshonkov

Kazan National Research Technical University named after A.N. Tupolev

Email: nvlevshonkov@kai.ru

Associate Professor of the Department of Aircraft Construction and Design

Russian Federation

References

  1. Khaliulin V.I. Geometrical simulation and synthesis of FC structures of sandwich panels. Vestnik Kazanskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. A.N. Tupoleva. 1995. No. 1. P. 31-40. (In Russ.)
  2. Tachi T. Geometric considerations for the design of rigid origami structures. Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium. 2010.
  3. Wu W., You Z. Modelling rigid origami with quaternions and dual quaternions. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2010. V. 466, Iss. 2119. P. 2155-2174. doi: 10.1098/rspa.2009.0625
  4. Gattas J.M., You Z. Geometric assembly of rigid-foldable morphing sandwich structures. Engineering Structures. 2015. V. 94. P. 149-159. doi: 10.1016/j.engstruct.2015.03.019
  5. Fuchi K., Diaz A.R. Origami design by topology optimization. Journal of Mechanical Design. 2013. V. 135, Iss. 11. doi: 10.1115/1.4025384
  6. Evans T.A., Lang R.J., Magleby S.P., Howell L.L. Rigidly foldable origami gadgets and tessellations. Royal Society Open Science. 2015. V. 2, Iss. 9. doi: 10.1098/rsos.150067
  7. Khaliulin V.I., Dvoeglazov I.V. Ustroystvo dlya gofrirovaniya listovogo materiala [Apparatus for corrugating sheet material]. Patent RF, no. 2118217, 1998. (Publ. 27.08.1998)
  8. Khaliulin V.I. Classification of regular row-arranged folded structures. Russian Aeronautics. 2003. V. 46, Iss. 2. P. 8-17.
  9. Khaliulin V.I. A technique for synthesizing the structures of folded cores of sandwich panels. Russian Aeronautics. 2005. V. 48, Iss. 1. P. 8-16.
  10. Khaliulin V.I., Batrakov V.V. Technological schemes of zigzag crimp shaping. Russian Aeronautics. 2005. V. 48, Iss. 2. P. 106-114.
  11. Zhou X., Zang S., Wang H., You Z. Geometric design and mechanical properties of cylindrical foldcore sandwich structures. Thin-Walled Structures. 2015. V. 89. P. 116-130. doi: 10.1016/j.tws.2014.12.017
  12. Liu B., Sun Y., Zhu Y. Fabrication and compressive behavior of carbon-fiber-reinforced cylindrical foldcore sandwich structure. Composites Part A: Applied Science and Manufacturing. 2019. V. 118. P. 9-19. doi: 10.1016/j.compositesa.2018.12.011
  13. Hu Y., Liang H., Duan H. Design of cylindrical and axisymmetric origami structures based on generalized Miura-ori cell. Journal of Mechanisms and Robotics. 2019. V. 11, Iss. 5. doi: 10.1115/1.4043800
  14. Tachi T. Freeform variations of origami. Journal for Geometry and Graphics. 2010. V. 14, Iss. 2. P. 203-215.
  15. Tachi T. Designing freeform origami tessellations by generalizing Resch's patterns. Journal of Mechanical Design. 2013. V. 135, Iss. 11. doi: 10.1115/1.4025389
  16. Khaliulin V.I., Khilov P.А. Pequliarities of production technology for wedge-shaped folded cores from composites. Vestnik Kazanskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. A.N. Tupoleva. 2012. No. 2. P. 13-18. (In Russ.)
  17. Khaliulin V.I. Tekhnologicheskie skhemy izgotovleniya mnogosloynykh konstruktsiy [Process flow diagrams for the manufacture of multilayer structures]. Kazan: Kazan State Technical University Publ., 1999. 168 p.
  18. Miura K. Method of packaging and deployment of large membranes in space. Tech. Report no. 618. The Institute of Space and Astronautical Science, 1985. 9 p.
  19. McKay D.M., Morgan S.J. Structural systems for panels, boards, shelves, and laminates. Patent GB 2123874 A, E04C2/32, 1984.
  20. Muhs F., Klett Y., Middendorf P. Influence of geometry and base material on the compressive properties of foldcores. Proceeding of the 17th European Conference on Composite Materials (June, 26-30, 2016, Munich, Germany). 2016.
  21. Du Y., Song C., Xiong J., Wu L. Fabrication and mechanical behaviors of carbon fiber reinforced composite foldcore based on curved-crease origami. Composites Science and Technology. 2019. V. 174. P. 94-105. doi: 10.1016/j.compscitech.2019.02.019
  22. Portnoy V.A., Portnoy A.V. Algorithm for analyzing strength and stability of sandwich panels with folded cores by finite-element method. Vestnik Kazanskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. A.N. Tupoleva. 2009. No. 3. P. 5-8. (In Russ.)
  23. Paimushin V.N., Zakirov I.I., Karpikov Y.A. Theoretical and experimental technique of determining the mechanical characteristics of folded structure core in the form of Z-crimp. Theoretical foundations and core compression in transverse direction. Russian Aeronautics. 2012. V. 55, Iss. 3. P. 233-244. doi: 10.3103/S1068799812030038
  24. Paimushin V.N., Zakirov I.M., Karpikov Y.A. Theoretical and experimental technique of determining the mechanical characteristics of folded structure filler in the form of Z-crimp (shear of a filler in cross-sectional planes). Russian Aeronautics. 2013. V. 56, Iss. 3. P. 234-246. doi: 10.3103/S1068799813030057
  25. Heimbs S. Foldcore sandwich structures and their impact behaviour: An overview. Solid Mechanics and its Applications. 2013. V. 192. P. 491-544. doi: 10.1007/978-94-007-5329-7_11
  26. Movchan G.V. Analysis of folded structures for impact resistance. Russian Aeronautics. 2007. V. 50, Iss. 4. P. 439-441. doi: 10.3103/S1068799807040162
  27. Molod M.V., Maksimenkov V.I., Fedoseev V.I. Shaping technologies for manufacturing noise insulation casings of turbojet engines. Vestnik of Samara University. Aerospace and Mechanical Engineering. 2018. V. 17, no. 3. P. 167-174. doi: 10.18287/2541-7533-2018-17-3-167-174 (In Russ.)
  28. Dosikova Yu.I., Khabibullina D.D. Sound insulating characteristics of panels with z-corrugation type fold structure filler. Vestnik Kazanskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. A.N. Tupoleva. 2013. No. 4. P. 61-64. (In Russ.)
  29. Dosikova Yu.I. Studies of soundproofing characteristics of sandwich panels with cores of Z-crimp type. Russian Aeronautics. 2013. V. 56, Iss. 2. P. 194-198. doi: 10.3103/S1068799813020141
  30. Kiauka M.Y., Ponomarev I.M., Safin I.S. Analytical dependences for determination of thermal conduction in sandwich panels with folded cores. Russian Aeronautics. 2012. V. 55, Iss. 3. P. 298-304. doi: 10.3103/S1068799812030129
  31. Khaliulin V.I., Skripkin E.A. Sposob izgotovleniya zigzagoobraznogo gofra (varianty) [Method for making zigzag corrugation (variants)]. Patent RF, no. 2100120, 1997. (Publ. 27.12.1997, bull. no. 36)

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c) 2020 VESTNIK of Samara University. Aerospace and Mechanical Engineering

License URL: https://journals.ssau.ru/index.php/vestnik/about/editorialPolicies#custom-2

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies