Email this article 
Control metods of hardening process in the time of SPD
- Authors: Volkov A.N.1, Sazonov M.B.1, Mashinnov K.Y.1
-
Affiliations:
- Samara State Aerospace University named after academician S.P. Korolyov (National Research University)
- Issue: Vol 10, No 3-3 (2011): Special Issue
- Pages: 309-314
- Section: AIRCRAFT AND SPACE ROCKET ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/6901
- DOI: https://doi.org/10.18287/2541-7533-2011-0-3-3(27)-309-314
- ID: 6901
Cite item
Full Text
Abstract
Control process of shotimpact methods SPD is considered. Control of hardening process of pieces from titanic alloys is possible by strain deflection of plates from carbon steels is indicated. The intensity of exoelectronic emission of the surface of finished part can be utilized in the capacity of assessment criterion of stressed - distorted state of superficial layer.
About the authors
A. N. Volkov
Samara State Aerospace University named after academician S.P. Korolyov (National Research University)
Author for correspondence.
Email: fdla@ssau.ru
Candidate in Engineering Science, associate Professor Russian Federation
M. B. Sazonov
Samara State Aerospace University named after academician S.P. Korolyov (National Research University)
Email: fdla@ssau.ru
Candidate in Engineering Science, associate Professor Russian Federation
K. Yu. Mashinnov
Samara State Aerospace University named after academician S.P. Korolyov (National Research University)
Email: fdla@ssau.ru
engineer Russian Federation
References
Supplementary files
