Email this article 
Numerical method for determining the parameters of a creep curve on the basis of Soderberg law
- Authors: Makarov R.Y.1
-
Affiliations:
- Samara State Technical University
- Issue: Vol 14, No 2 (2015)
- Pages: 113-118
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/2661
- DOI: https://doi.org/10.18287/2412-7329-2015-14-2-113-118
- ID: 2661
Cite item
Full Text
Abstract
The article discusses the development of a new numerical method for determining the parameters of a creep model. A discrete linear parametric model describing the relationship between successive values of creep strain in the form of a difference equation is proposed. Formulas for describing the relationship between the coefficients of the linear parametric discrete model and the creep model parameters have been obtained. An iterative procedure of mean-square estimation of coefficients of the linear parametric discrete model is described. A technique of estimating the error of calculating the model parameters of creep is shown, numerical and analytical studies of reliability and correctness of the described procedure have been carried out. Experimental verification of the results with good agreement between theoretical and experimental data is presented. The developed numerical method of determining the creep curve parameters can be applied at the stages of stationary and non-stationary creep.
About the authors
R. Yu. Makarov
Samara State Technical University
Author for correspondence.
Email: makaroman1@yandex.ru
Postgraduate student of the Department of Applied Mathematics and Computer Science
Russian FederationReferences
- Malinin N.N. Prikladnaya teoriya plastichnosti i polzuchesti [Applied theory of plasticity and creep]. Moscow: Mashinostroenie Publ, 1975. 387 p.
- Demidenko E.Z. Lineynaya i nelineynaya regressiya [Linear and nonlinear regression]. Moscow: Finansy i statistika Publ, 1981. 302 p.
- Faridani M.N. Classification and probabilistic model development for creep failures of structures: study of x-70 carbon steel and 7075-T6 aluminum alloys. 2012. Faculty of the Graduate School of the University of Maryland.
- Zoteev V.E. Parametricheskaya identifikatsiya dissipativnykh mekhanicheskikh sistem na osnove raznostnykh uravneniy [Parametric identification of dissipative mechanical systems based on differential equations]. Moscow: Mashinostroenie Publ, 2009. 344 p.
- Klebanov Ya.M., Adeyanov I.E., Ladyagina E.I. Numerical creep analysis of structures under complex loading. Vestnik SamGTU. Ser. Fiz.-mat. nauki. 2006. No. 42. P. 75-81. (In Russ.)
- doi: 10.14498/vsgtu414
- Tynda A.N., Romanov A.E. Numerical solution of nonlinear Volterra integral equations with fractionally-exponential kernels of rheological models of viscoelastic continuum. Izv. Irkutskogo gos. un-ta. Ser. Matematika. 2012. V. 5, no. 2. P. 69-80. (In Russ.)
Supplementary files
